Complete the finite element procedure of conversion between epoch curve and reaction curve of earthquake acceleration.
完善地震加速度时程曲线与反应谱曲线之间转换的有限元程序。
The spline finite element procedure is used in space domain and the state space technique in time domain respectively.
对空间域采用混合样条元法，对时间域采用现代控制论中的状态空间法。
Using finite element procedure ANSYS, we analyze caisson gravity wharf acted by the vessel load in the static condition.
利用有限元分析软件ANSYS，对沉箱重力式码头在船舶荷载作用下的沉箱静态力学性能进行数值分析。
When used to analyze complicated bridge structures, the large general-purpose finite element procedure ANSYS has some flaws.
大型通用软件在分析复杂桥梁结构时，在某些桥梁专业功能上有所欠缺。
This paper analyzed a staggered-truss system by use of finite element procedure SAP2000 and evaluated the anti-seismic behavior of the staggered truss system.
应用有限元程序SAP2 0 0 0 ，对错列桁架体系进行了静力弹塑性分析，并对该体系的抗震性能做出了评价。
Using the well-known weighted residual method and finite element procedure, a nonlinear static analysis parallel with effective stress dynamic analysis has been made.
采用著名的加权剩余值法和等参数有限单元法，对坝体进行非线性静力分析和非线性有效应力动力分析。
In this paper, a finite element procedure for the nonlinear static analysis of reinforced concrete shells considering geometrical and material nonlinearities is presented.
本文采用有限元数值方法，分析计算了大型钢筋混凝土壳的几何、物理非线性静力问题。
Because the software of ANSYS has the characteristics such as model building simply, fast and conveniently, it becomes the representation of large universal finite element procedure.
ANSYS软件具有建模简单、快速、方便的特点，因而成为大型通用有限元程序的代表。
Because the software of ANSYS has the characteristics such as model building simply, fast and conveniently, it becomes the representative of large universal finite element procedure.
ANSYS软件具有建模简单、快速、方便的特点，因而成为大型通用有限元程序的代表。
The non-linear finite element procedure was introduced in detail, Mechanical behavior of RC culvert pipes is analyzed with it, the relations of loads with stress, strain, cracking is put forward.
详细的介绍了用于本研究的非线性有限元程序，并用该非线性有限元程序计算分析了涵管的受力性能，得出涵管受力与应变、变形、破坏之间的规律。
Mesh generating is a necessary procedure between geometric definition of part and its finite element analysis.
有限元网格生成是零件几何定义和有限元分析之间必不可少的步骤。
A transfer procedure plays an important role in adaptive finite element applied to the load history-dependent problems in connection with evolving meshes.
对于依赖于加载历史的自适应有限元分析问题，不同网格间力学结果的传递过程起着重要作用。
Combining finite element method and the mathematical programming technique, a procedure of back analysis of consolidation has been developed.
结合有限单元法和数学规划法提出一确定地基固结过程中材料参数的反分析法。
Procedure for computing a reliable and efficient a-posteriori error estimate in finite element contact problem analysis is presented.
本文提供了一种可作为弹性接触问题有限元分析后处理过程的误差估计方法。
The computer simulation procedure is the key to analyzing the mechanical behaviors of the continuous casting segment tower structure using threedimensional finite element analysis method.
应用三维弹性有限元方法对连铸机扇形段框架体进行分析计算的关键在于结构计算机模拟的可能性和可行性。
A time domain coupling procedure was developed for the finite element (FE) and scaled boundary finite-element (SBFE) methods to analyze dynamic unbounded soil-structure interaction problems.
该文提出了一种有限元(FE)比例边界有限元(SBFE)时域耦合方法以分析结构地基动力相互作用问题。
The elastic_plastic fracture dynamic finite element analysis and the results of standard example indicate the procedure is believable.
通过算例的结果表明，编制的程序是可靠的。
Firstly, combining the finite element method and the mathematical programming technique, a procedure of back analysis for consolidation problem is developed.
本文结合有限单元法和数学规划法提出一固结问题的反分析方法。
Method of finite element partition, modeling procedure of finite element method, modeling process of triangle unit and quadrangle unit are detailedly introduced;
有限单元分割的方法和有限元方法建模的步骤，重点介绍三角形单元、四方体单元的建模过程；
Finite element method was carry out to investigated the effects of friction in a novel equal channel angular pressing (ECAP) based procedure which can handles the strip metal ECAP procedure.
应用有限元方法对一种全新的可应用于板料的等通道角挤压(ECAP)方法中摩擦力的作用进行了有限元模拟。
This article introduced the the solution procedure of structure stress by finite element software ANSYS, represent the application of ANSYS, at last we finished the stress analysis of a gravity dam.
介绍了ANSYS有限元软件求解结构内力的过程，阐述了其分析应用，并完成了一个重力坝的内力分析。
In this paper an elastoplastic finite element method is employed to simulate the procedure of the failure of the supports for excavation, by which the factors are analyzed.
本文用弹塑性有限元方法模拟基坑破坏过程，分析了影响基坑支护破坏的因素。
The procedure and results of a finite element analysis on the oil distributing plate of an axial piston pump are introduced.
本文介绍了对轴向柱塞泵配油盘进行有限元分析的方法和结果。
The finite element analysis of the compound bending forming process is done for knives of the template. The spring back in the forming procedure is investigated.
运用有限元方法分析了模切板刀片的复合弯曲成形，对成形过程中的回弹进行了研究。
By developing the interface procedure of the model transformation, the finite element model was successfully transformed between CAPP system and CAE system without distortion.
通过自行编制的模型转换程序，实现了有限元模型在CAPP系统和CAE系统间的方便快捷的相互转换及显示。
The time-variable stiffness is acquired by 3D finite element contact procedure, while the exciting force caused by meshing shock is obtained by 3D dynamic contact finite element mixed formula.
时变刚度曲线用轮齿三维接触有限元方法求得，啮合冲击激励力用轮齿三维冲击-动力接触有限元混合法求得。
According to the interface procedure of the model transformation compiled in this paper, the finite element model was successfully transformed from CAD system to CAE system in "nought distortion".
通过自行编制的模型转换接口程序，成功地实现了有限元模型从CAD系统到CAE系统的方便快捷的“零失真”转换。
According to the interface procedure of the model transformation compiled in this paper, the finite element model was successfully transformed from CAD system to CAE system in "nought distortion".
通过自行编制的模型转换接口程序，成功地实现了有限元模型从CAD系统到CAE系统的方便快捷的“零失真”转换。
应用推荐