To obtain a constant gradient magnetic field outside unilateral nuclear magnetic resonance (NMR), optimal design method based on finite element method (FEM) and topology optimization is proposed.
为了在单边核磁共振仪器外产生梯度恒定的磁场，提出利用基于拓扑优化和有限元法的优化设计方法。
There are four post frame molding press and two kinds of structure, the fuselage uses finite element analysis and optimization design of the structure, reasonable structure.
成型压机有四柱和框架二种结构，机身采用有限元件结构分析和优化设计，结构合理。
As an example, Finite element analysis and optimization design are made to a voltage transformer of rating primary voltage 35KV, rating secondary voltage 100V, rating frequency 50HZ.
并以额定一次电压35KV，额定二次电压100V，额定频率50HZ的电压互感器为例，进行了有限元分析计算和优化设计。
The numerical analysis method, especially the finite element method (FEM) has become the primary tool of numerical analysis and optimization design in geotechnical engineering.
数值分析法，尤其是有限单元法已经成为岩土工程数值分析和优化设计的重要工具。
An automotive CAE software based on automotive theory, finite element analysis and optimization design has been developed to resolve relevant engineering problems.
基于汽车理论、有限元分析和优化设计方法，为解决工程实际问题，开发了汽车CAE软件系统。
This paper carries on movement interference, finite element analysis and optimization design.
对模型进行了运动干涉检查，有限元分析和优化设计。
Based on finite element theory and optimization theory, considering mechanical properties of the structure, the reliability optimization design method of tower truss system is presented.
根据有限元理论及最优化理论，同时考虑结构受力特点，给出了塔架体系在可靠度约束下的最优化设计方法。
The finite element analysis and optimization design of piezoelectric intelligent beam was made based on ANSYS.
运用ANSYS软件进行压电智能梁结构的有限元分析和优化设计。
At present, modern design methods such as finite element analysis, optimization design, reliability design and etc. are gradually applied in the automotive transmission developing work.
目前，在汽车变速器的开发中，有限元方法、优化设计和可靠性设计等现代设计方法逐步得到应用。
The main function of this program is to establish connection with optimization design and finite element analysis programs.
本程序的主要功能是实现与优化设计、有限元分析程序的联接，是一个较为实用的软件。
Optimization results show that this structure optimization method based on nonlinear finite element analysis is effective in joint structure design and the engineering demands are well satisfied.
优化结果显示，采用非线性有限元法和优化方法对卡环连接结构进行设计能够取得满意的效果，设计结果满足工程要求。
Based on reliability theory, combined with finite element method for structure optimization, the lightweight design for the lower arm of a suspension is conducted.
基于可靠性理论，结合有限元结构优化方法进行某悬架下摆臂的轻量化设计。
Research was conducted into the optimization design of stay ring structure of the bulb tubular turbine based on the analysis of finite element.
邢伟在有限元分析的基础上，对贯流式水轮机座环结构进行了优化设计研究。
Optimization of corona ring design for EHV composite insulator using finite element and neural network method.
基于有限元和神经网络方法对超高压合成绝缘子均压环结构优化的研究。
Additionally, optimization in structure design of vane MRF damper is completed by using the method of magnetic field finite element analysis, which will effectively enhance performance of damper.
采用磁场有限元分析的方法对叶片式MRF减振器的结构设计进行优化，可以有效提高减振器的性能。
In the design of three-bar truss structure commonly used for engineering, the optimization analysis is carried out for the structure by finite element software ANSYS6.
在对工程上常用的三杆桁架结构的设计中，利用大型有限元分析软件ANSYS6。
The finite element method is used for calculation so as to provide the basis for the shaft interference fitted analysis of the following connection strength and the optimization design.
与传统方法相比，该方法更为科学和实用，为过盈配合的联结强度分析和优化设计提供了依据。
In this paper the finite element method is combined with optimization. The strengthening optimization is put forward on the basis of the limit analyse method of pressure vessel strengthening design.
将有限元应力分析方法与优化设计方法相结合，提出了基于受压容器开口补强的极限分析理论和优化设计思想。
Nowadays, many enterprises and design department have used finite element method widely on the manufacturing process simulation of product, optimization design and so on.
今天的很多企业和设计部门已普遍采用有限元方法，对产品进行生产过程的数值模拟、优化设计等研究。
Therefore, the optimization of cable bridge design, finite element analysis, safety and reliability of gradually drawed people's attention.
因此索道桥的优化设计、有限元分析、安全性及可靠性逐渐引起人们的重视。
Based on ANSYS - a large finite element analysis software for calculate and analysis platform, a system developed for the design optimization of turbine stators.
本文以大型有限元分析软件ANSYS为计算分析平台，开发了发动机涡轮静子结构优化设计系统。
With size optimization of finite element software, the aluminum alloy hood is designed based stiffness and an improved design is put forward.
借助有限元软件基于刚度对铝质发动机罩进行了尺寸优化设计并提出了一种改进方案。
The object-oriented finite element program is studied. The object-oriented technique is applied to the multi-level optimization design to develop out the multi-level optimization design program.
本文开展了面向对象的有限元程序的研究，将面向对象应用于结构的多级优化设计中，开发出多级优化设计程序；
The perturbation-based stochastic finite element analysis incorporating structural optimization techniques is employed in the structural robust design problem.
研究了考虑参数随机性的结构静动态特性稳健性优化设计问题的数学模型和数值求解。
The topology optimization design module of the commercial finite element software ANSYS was used to the bicycle frame and multiple arch bridge for the topology optimization design.
通过采用商用有限元软件ANSYS中的拓扑优化设计模块对自行车车架和多拱拱桥进行了拓扑优化设计，优化结果表明所得拓扑结构清晰，并与实际的自行车车架和多拱拱桥非常相似。
The results indicate that analysis is relatively accurate, the finite element model and the analysis method is appropriate. The result can be further used for optimization design...
结果表明，应用i - DEAS软件分析计算具有较高的精度，所建立模型和采用的计算方法合理，可进一步用于高压水压试验机结构的优化设计。
The results indicate that analysis is relatively accurate, the finite element model and the analysis method is appropriate. The result can be further used for optimization design...
结果表明，应用i - DEAS软件分析计算具有较高的精度，所建立模型和采用的计算方法合理，可进一步用于高压水压试验机结构的优化设计。
应用推荐