After the formulation of appropriate criteria takes place the optimization of the system with the Finite Element Software ANSYS.
在列出相应的准则公式后，采用有限元程序ANSYS将系统进行优化。
Considering the boom cross section as a whole, a parametric finite element model and a parametric optimization model for local stability calculation of a boom structure were established.
将吊臂截面作为整体考虑，建立了吊臂结构局部稳定性计算的参数化有限元模型和参数优化模型。
During the evolution process, the used finite element participated the evolution and the shape optimization of supporting structure.
在整个演化程序的进行中，所用有限单元既可以参与演化，又可以参与支撑结构的形状优化。
To obtain a constant gradient magnetic field outside unilateral nuclear magnetic resonance (NMR), optimal design method based on finite element method (FEM) and topology optimization is proposed.
为了在单边核磁共振仪器外产生梯度恒定的磁场，提出利用基于拓扑优化和有限元法的优化设计方法。
There are four post frame molding press and two kinds of structure, the fuselage uses finite element analysis and optimization design of the structure, reasonable structure.
成型压机有四柱和框架二种结构，机身采用有限元件结构分析和优化设计，结构合理。
With the ANSYS software and practical project example, the equivalent finite element stresses is applied in stress restriction for the shape optimization of arch dam by using APDL.
基于有限元计算软件ANSYS，结合工程实例，利用参数化设计语言APDL将拱坝等效应力应用于应力约束，进行拱坝体型优化设计。
By solved this optimization model with finite element software, a more symmetrical electric field in vacuum interrupters was obtained and its peak value appeared in second auxiliary gap.
通过求解灭弧室内部的静电场定解问题，优化其内部几何参数，使灭弧室内部电场较均匀，电场强度的峰值出现在“第二辅助间隙”中。
Optimization of corona ring design for EHV composite insulator using finite element and neural network method.
基于有限元和神经网络方法对超高压合成绝缘子均压环结构优化的研究。
As an example, Finite element analysis and optimization design are made to a voltage transformer of rating primary voltage 35KV, rating secondary voltage 100V, rating frequency 50HZ.
并以额定一次电压35KV，额定二次电压100V，额定频率50HZ的电压互感器为例，进行了有限元分析计算和优化设计。
An automotive CAE software based on automotive theory, finite element analysis and optimization design has been developed to resolve relevant engineering problems.
基于汽车理论、有限元分析和优化设计方法，为解决工程实际问题，开发了汽车CAE软件系统。
Based on finite element theory and optimization theory, considering mechanical properties of the structure, the reliability optimization design method of tower truss system is presented.
根据有限元理论及最优化理论，同时考虑结构受力特点，给出了塔架体系在可靠度约束下的最优化设计方法。
This paper carries on movement interference, finite element analysis and optimization design.
对模型进行了运动干涉检查，有限元分析和优化设计。
In this paper, an algorithm to finite element mesh nodal number optimization, the WGPS, is presented. This algorithm is obtained based on the GPS algorithm.
本文提出一种优化有限元网洛节点标号的WGPS算法，该法是在GPS法的基础上作了一些改进而形成的。
The finite element analysis and optimization design of piezoelectric intelligent beam was made based on ANSYS.
运用ANSYS软件进行压电智能梁结构的有限元分析和优化设计。
Based on first-order optimization calculating theory, authors established the optimal finite element model of swivel construction of arch bridge adopting hydraulic sync elevation technology.
根据一阶最优化计算理论，构建了采用液压同步提升技术进行转体施工拱桥的优化有限元模型。
At present, modern design methods such as finite element analysis, optimization design, reliability design and etc. are gradually applied in the automotive transmission developing work.
目前，在汽车变速器的开发中，有限元方法、优化设计和可靠性设计等现代设计方法逐步得到应用。
Fixture optimization differs from structure optimization because its finite element model is difficult to parameterize.
夹具优化不同于结构优化等优化问题，它的有限元模型参数化不易实现。
Optimization results show that this structure optimization method based on nonlinear finite element analysis is effective in joint structure design and the engineering demands are well satisfied.
优化结果显示，采用非线性有限元法和优化方法对卡环连接结构进行设计能够取得满意的效果，设计结果满足工程要求。
The main function of this program is to establish connection with optimization design and finite element analysis programs.
本程序的主要功能是实现与优化设计、有限元分析程序的联接，是一个较为实用的软件。
The gradient optimization algorithm based on the stochastic finite element was adopted to analyze the reliability of the frame with stochastic parameters.
基于随机有限元的梯度优化算法引入拥有随机参数的框架可靠度分析。
Based on reliability theory, combined with finite element method for structure optimization, the lightweight design for the lower arm of a suspension is conducted.
基于可靠性理论，结合有限元结构优化方法进行某悬架下摆臂的轻量化设计。
Research was conducted into the optimization design of stay ring structure of the bulb tubular turbine based on the analysis of finite element.
邢伟在有限元分析的基础上，对贯流式水轮机座环结构进行了优化设计研究。
The finite element analysis (FEA) and the variable density methods were used. The optimization method and process were presented.
采用有限元法与变密度法，给出了优化方法和步骤。
The static analysis and structural optimization of the key seal parts and components of vacuum clamp are researched in this thesis using finite element analysis software ANSYS.
本文利用通用化有限元分析软件ANSYS作为分析工具，对真空吸夹具的密封关键部位及密封元件进行了有限元静态分析和优化设计。
The static analysis and structural optimization of the key seal parts and components of vacuum clamp are researched in this thesis using finite element analysis software ANSYS.
本文利用通用化有限元分析软件ANSYS作为分析工具，对真空吸夹具的密封关键部位及密封元件进行了有限元静态分析和优化设计。
应用推荐