The finite element models of the field ambulance's frame, body and stretcher are established.
建立了急救车车架、车厢与担架台的有限元模型。
Purpose To explore a method reconstructs TMJ 3d finite element models of different mouth opening.
目的探讨包含下颌骨的不同张口位tmj三维有限元模型的建立方法。
This paper studies the calculation of vortex-induced responses of Bridges by finite element models.
本文研究用有限元法计算桥梁涡激振动的时程响应。
Based on this point, the mechanics and finite element models for casing stress calculation are established.
在考虑这一特点的基础上，建立了套管应力计算的力学及有限元模型。
The new Quadrilateral Area Coordinate (QAC) method is a powerful tool to construct 2d finite element models.
四边形面积坐标(QAC)方法是新近提出的构造二维有限元模型的工具。
The author used different type of units to established three different finite element models of full - bridge.
通过选取不同的单元类型，建立了三种全桥有限元模型。
Build finite element models for key transmission parts of overrunning clutch and analyze their mode and strength.
对超越离合器关键传动件建立了有限元模型，进行了模态分析、强度分析。
Spatial finite element models corresponding to each construction stage were established and the analysis was completed.
对每一个施工阶段建立了相应的空间有限元模型，完成了分析计算。
Objective: to construct of 3-dimensional finite element models of mandibular first molar with structure defect restoration.
前言：目的：建立下颌第一磨牙牙体缺损及修复的三维有限元模型。
Objective To establish the three-finite element models of the mandible before and after Sagittal split ramus osteotomy(SSRO).
目的建立下颌支矢状劈开后退术前后的下颌骨三维有限元模型。
The biomechanical parameters of 9 finite element models were measured under axial compressive load within physiological range.
生理压缩载荷下，分别对9种有限元模型的生物力学参数进行测试。
Results: 3D finite element models of rigid internal fixation for different zygomatic-maxillary complex fractures were established.
结果：建立了颧上颌骨复合体不同部位的坚强内固定三维有限元模型。
The dynamic contact finite element models of standard involute gear and modification gear are established in the software of ANSYS.
在ANSYS软件中建立了标准渐开线齿轮与修形齿轮的动力接触有限元模型。
Finite element models based on different Lagrangian methods have been used to analyze the deep drawing process by the fe software, MARC.
采用有限元软件MARC基于不同拉格朗日法建立了一个有限元模型来分析深冲压成形过程。
Nonlinear finite element models by incorporating geometric and material nonlinearities were developed using finite element program ANSYS.
首先利用ANSYS程序建立了构件的非线性有限元模型，模型中包含了几何和材料双重非线性。
Based on the inverse iteration method, an iterative technique for dynamic condensation of finite element models has been derived in this paper.
本文从逆迭代法出发，导出了一种有限元模型动力缩聚迭代方法。
Based on ANSYS programs, the nonlinear finite element models of two-span prestressed steel-concrete continuous composite beam were established.
本文基于大型有限元软件ANSYS，建立预应力钢-混凝土两跨连续组合梁的非线性有限元分析模型。
To study deeply the behaviours of the structure, this paper introduced the on site experiment of the structure, described finite element models.
为进一步研究其性质，介绍了它的现场载荷实验情况，描述了建立有限元模型的过程。
Building nonlinear finite element models using ANSYS program, And in the light of previous experimental to verify the correctness in the article.
本文利用ANSYS程序建立了非线性的有限元模型，并参照前人试验验证模型分析程序的正确性。
Finite element models of a complete stump socket contains geometric model, material characteristics, load condition and model boundary condition.
一个完整的残肢接受腔有限元模型包括几何模型、材料特性、载荷状况和模型边界条件。
The main study object of the paper is channel steel whose finite element models are founded in ANSYS the material is assumed as elastic-plastic body.
本文以槽钢为主要研究对象，假定材料为理想弹塑性体，在ANSYS中建立其有限元模型。
Finite element models for formations with inclined saline rock interbeds were set up by use of nonlinear finite element method for saline rock creep deformation.
文章用盐岩蠕变的非线性有限元法建立了具有倾斜盐岩夹层的地层有限元模型。
Then a complete vehicle side impact model is developed by adding finite element models for door trim, ES-2 dummy and moving deformable barrier on converted model.
在转换模型的基础上，通过加入车门内饰、假人和移动障碍壁模型，建立了完整的整车侧面碰撞模型。
Conclusion the finite element models can provide a method of understanding the relationship between biomechanical performance of the disc due to disc degeneration.
结论有限元方法可以直观地观察椎间盘退变对腰椎的影响，是对临床研究的必要补充。
It's taking a team from five countries to turn these into finite element models for bite force comparison research I am I very grateful for being allowed to use it.
它采取一个队从五个国家把这些变成有限要素模型为叮咬力量我是我非常感恩对准许使用它的比较研究。
Dynamic condensation methods for finite element models have been broadly applied in eigenvalue problems of large structures, test analysis model correlation and so on.
有限元模型的动力缩聚法已被广泛地应用到大阶系统的特征分析、试验-分析模型的相关分析等领域中。
To reflect the relationship between clamps and residual stress, finite element models with different clamping schemes were built and the clamping process was simulated.
为了揭示装夹方案对残余应力的影响，利用有限元技术模拟了工件加工过程中不同的装夹方案，并分析了模拟结果。
Conclusion Establishment of three-dimensional finite element models of artificial lumbar intervertebral disc and analysis of its stress are feasible. The results are reliable.
结论建立人工腰椎间盘三维有限元模型并进行其应力分析是可行的，结果是可信的。
The finite element model updating method is studied in this paper, and the finite element models of the honeycomb panels which are widely used in spacecraft design are updated.
本文就有限元模型修正方法进行了研究，并对航天器上广泛使用的蜂窝板有限元模型进行了修正。
The finite element model updating method is studied in this paper, and the finite element models of the honeycomb panels which are widely used in spacecraft design are updated.
本文就有限元模型修正方法进行了研究，并对航天器上广泛使用的蜂窝板有限元模型进行了修正。
应用推荐