The optimized design scheme could be found out to content requirements of design by a method combining calculation of finite element model and optimized design.
采用整体有限元模型计算与设计优化相结合的方法，可以在满足各项设计要求的条件下找到最优预应力设计方案。
With the welding spot fatigue lifetime pre-estimation method, by combination of the finite element analysis and stress calculation, the welding spot fatigue damage under actual load can be calculated.
采用焊点疲劳寿命预估方法，通过有限元分析并结合应力计算，即可计算出实际载荷工况下的焊点疲劳损伤。
Using finite element analysis method, three-dimensional calculation is conducted for force summing on rod in high-inclination well of Liaohe tidal zone oilfield.
应用有限元法对辽河滩海油田大斜度定向井抽油杆柱受力进行了三维计算。
This paper deals with the necessary procedures and noticeable problems of the staged - calculation method in the structure finite element analysis.
本文讨论实现分阶段计算方法的具体措施和应该注意的问题。
Compared with finite element method, the finite volume method maintains the local conservation properties of physical quantities and has a simpler calculation.
与有限元方法相比，有限体积法保持物理量的局部守恒性质，并且计算更加简单。
With the non-line finite element method, the numberical value calculation on the stress and deformation of surrounding rock of deep mine roadways has been presented.
采用非线性有限元法，对深井巷道围岩应力及变形状态进行了数值计算。
Ordinary finite element and finite difference methods are often used for seepage calculation, while storage centered finite element method is rarely applied to practice.
普通有限元方法和有限差分方法是渗流计算中常用的数值方法，而贮量集中有限元方法则很少被实际应用。
Finite element method is used to study stress and place moving field inside the structure and electric measure method is utilized to verify the result of calculation.
利用有限元方法对该结构内部的应力场和位移场进行了研究。
Compared with finite element method and finite stripe method, the given method cuts remarkably the amount of calculation work.
本方法与有限元法及有限条法相比，可使计算工作量显著减少。
The above-mentioned methods are combined to optimize the field of the breaker, and the calculation results are compared with the results calculated by finite element method.
本文将上述方法结合起来对断路器的电场进行优化计算。并将计算结果与有限元法的计算结果进行了分析比较。
Finite element analysis method is an effective method for calculating thermal stress, but the temperature parameters for calculation have no uniform standard.
有限元是计算温度应力的很好方法，但是对于计算中所需的温度参数取值并没有统一的标准。
Based on the finite element method and the theory of mode superposition, a quasi-static calculation method for the seismic response of rigid pile composite foundation under SV wave is presented.
针对竖向传播的SV波作用下刚性桩复合地基的动力反应，在振型分解反应谱法的理论基础上，提出一种基于有限元分析的拟静力方法。
Principles of reasonable values and reference data of saw tooth's rake, relief, wedge angles and radius of bottom arc can be determined through finite element method of calculation and optimum design.
通过有限单元法计算和优化设计，确定锯片齿形前角、后角、楔角及槽底圆弧半径合理值的原则及其参考值。
Study in the thesis indicates integrated finite element method is significant for the calculation of construction structure in the reality.
论文研究工作表明，应用组合有限元方法计算大型施工结构问题具有现实意义。
By applying the finite element method in the calculation, the temperature response curve of the cantilever has been obtained.
采用有限元方法进行计算，获得了悬臂梁弯曲变形的温度响应曲线。
The efficiency of forward calculation by finite element method is one order higher than that by immediate integration.
利用有限元方法进行正演计算的效率要比直接积分方法至少高一个数量级。
The repair method has been analyzed based on the finite element calculation.
基于有限元计算结果，对修复方法进行了分析。
The dynamic response question of composite pavement under moving load is analyzed by using the finite-element numerical calculation method.
应用有限元数值计算方法，分析了复合路面在移动荷载下的动力响应问题。
An analysis and calculation of the suspension system of maglev ball by finite element method (FEM) and similarity principle is presented.
提出用有限元法及相似原理来分析、计算磁悬浮球的悬浮系统。
With the theory of finite element method, the simulation calculation is conducted for the axial pressure distribution law, the leakage rate and the pressure variation of the seal rings.
利用有限元法理论，对密封圈的压力沿轴向的分布规律、泄漏量与压力变化关系进行了模拟计算。
Second, based on research and calculation method of inductance parameters for permanent magnet electrical machine, the finite element calculation and testing method of HEPMSG are presented.
其次，在对永磁电机电抗参数计算方法研究的基础上，提出了该种结构电机的交、直轴电抗参数的有限元计算和测试方法。
A pulsed solenoid magnet, which is applied for direct measurement of magnetocaloric, is designed by classical electromagnetic method and finite element numerical value calculation method.
采用经典电磁场、有限元数值计算两种方法，设计了一种用于磁热效应直接测量的脉冲螺线管磁体。
This paper deals with a field modulated magnetic gear and its calculation with the finite element method, and provides a powerful numerical technique for designing magnetic gears.
在电机设计时，使用有限元方法对一种大力矩磁力齿轮——磁场调制式磁力齿轮进行了磁场计算，为设计该磁力齿轮提供了有力的工具。
This paper put forward a new calculation method-express linear iteration for simple iteration of finite element equation of resolving non-linear electromagnetic field.
本文针对求解非线性电磁场有限元方程的简单迭代法，提出了一种新的算法-快速线性迭代法。
Matrix step is low by using the finite element transfer matrix method. Natural frequency by calculation approaches to actual natural frequency and the error is allowable.
用有限元传递矩阵法分析火炮身管固有振动特性，矩阵阶次低，计算所得的固有频率与实际固有频率接近，误差在允许的范围内。
Matrix step is low by using the finite element transfer matrix method. Natural frequency by calculation approaches to actual natural frequency and the error is allowable.
用有限元传递矩阵法分析火炮身管固有振动特性，矩阵阶次低，计算所得的固有频率与实际固有频率接近，误差在允许的范围内。
应用推荐