The repair method has been analyzed based on the finite element calculation.
基于有限元计算结果，对修复方法进行了分析。
This paper deals with the problem of the finite element calculation for underground culvert.
本文讨论了地下深埋涵管的应力有限元计算问题。
Artificial intelligence has been applied to the domain of finite element calculation of electromagnetic...
使人工智能语言在电磁场有限元计算领域里得以应用。
It is known that in plane finite element calculation the bearing load must be transformed into force of nodal.
在平面有限元计算中，必须把轴承负荷转为节点力。
Principle and accuracy of the sensor are analysed and verified with finite element calculation and experiment.
本文分析讨论了轮辐式扭矩传感器的原理和精度，并用有限元计算和实验加以验证。
Based on TPAW, finite element calculation of temperature field in keyhole plasma arc welding is conducted, and.
在此基础上，对小孔等离子弧焊接热场进行了有限元计算，分析了引弧后熔池及周围温度场的瞬时演变过程。
The finite element calculation of imbalance response and responding experiment are carried out aiming at the simulation rotor.
对模拟转子进行了不平衡响应的有限元计算，并进行了相应的实验研究。
Based on the finite element calculation results, some failure reasons of the pipeline system and the improving methods are discussed.
通过热胀应力和自重应力的系统分析，探讨了该管系的失效原因及其改进措施。
The results show that the non-linear finite element calculation can be accurate to the silo wall pressure distribution and of better flexibility.
分析结果表明，非线性有限元计算可以准确获得筒仓侧壁的压力分布且具有较好的灵活性。
The mesh dissection of finite element calculation of underground cavern is an important factor of affecting the whole calculation progress and quality.
地下洞室有限元计算的网格剖分是影响整个计算工作进度和质量的重要因素。
In this paper, the relative theory and its corresponding finite element calculation formula about the shape finding of membrane structure is introduced.
介绍了利用非线性有限元法进行薄膜结构找形分析的相关理论和相应的有限元计算公式。
During the finite element calculation of vehicle frame, the simulation of front leaf spring in the complete frame finite element mould must be considered.
在汽车车架有限元计算中，必须考虑前钢板弹簧在整个车架有限元模型中如何模拟。
It propose nonlinear dynamic analyzing model calculation method of the motor in the use of nonlinear magnetic path analysis and finite element calculation.
采用非线性磁路分析和有限元计算结合的方法给出了该电机的非线性动态分析模型计算的一种思路和方法，有助于电机设计分析。
Considering the common failure features of driving shaft and common working condition, the mechanics analysis and finite element calculation were conducted.
针对传动轴常见失效特征，结合常用工况，进行了力学分析和有限元计算。
Using the computer technology to establish the digit model can effectively enhance the speed and quality of antecedent work before finite element calculation.
利用计算机技术进行数字化建模，有效地提高了有限元计算前处理工作的速度和质量。
The results from centrifugal model test, field bearing test, and finite element calculation performed for the verification of the formula showed satisfactory agreement.
据室内离心机模型试验，现场载荷试验和有限元法分析的验证，它们之间符合程度是令人满意的。
When establishing finite element calculation model of three-axle bogie frame, it must be certain that the weight of each of the three axles is equal while adding restraint.
分析了三轴转向架构架在有限元计算分析时，约束的施加必须保证三根轴的轴重一致性；分析比较了中间轴一系簧垂向刚度对构架强度产生的影响。
Though the finite element calculation of the force analysis of the cycloid and the pin gear surface, it has been proved that the method put forward by the paper is correct.
通过对摆线轮和针齿齿面受力分析有限元计算，证明了本文提出的受力分析方法的正确性。
The paper introduces the arrangement of anchor sheaf in gate pier, the design of tension, the selection of anchorage system and the result of space finite element calculation.
本文对预应力闸墩的锚束布置、张拉力设计、锚固体系选择以及空间有限元计算成果作了简要介绍。
The method of establishing model in the finite element calculation can be used to the engineering calculation of machine foundations and carrying out the theoretical research.
有限元计算中提出的建模方法可以运用于机器基础的工程计算，也可运用于理论研究。
The seepage of CFRD joints is studied by using finite element calculation and complex variable function. The analytical equations of seepage quantity and gradient are deduced.
通过有限元计算和复变函数推导，系统研究了面板接缝的渗流规律，给出了接缝渗流量和渗透比降的解析计算公式，可用于面板堆石坝接缝渗流控制的设计。
The calculation result is reflected into the finite element calculation model, and the durability analysis of parts is carried out according to the load of the bench experiment.
将冲压计算结果反应到有限元计算模型中，根据台架实验的栽荷，进行零件的耐久性分析。
All along, the Bucket, circular stacker-reclaimer FEM analysis, are used to design the program first, then design the finite element calculation device model based on the program.
一直以来，对于斗轮机、圆形堆取料机等大型钢结构的有限元分析，都采用先有设计方案，再在已有设计方案的基础上，建立设备的有限元计算模型进行分析计算。
Described are the development target, main technical features and parameters, main structure, finite element calculation results and testing of the 4d-axle welding frame type bogies.
介绍了4d轴焊接构架式转向架的研制目标、主要技术特点和参数、主要结构、有限元计算结果及试验情况。
The finite element calculation results further showed that, the computation formulation of the adhesive interface shear stress of CFRP and steel, proposed by this paper, is effective.
粘结界面剪应力的有限元计算结果进一步表明，本文提出的CFRP与钢板的界面粘结剪应力计算公式是有效的。
The finite element calculation results further showed that, the computation formulation of the adhesive interface shear stress of CFRP and steel, proposed by this paper, is effective.
粘结界面剪应力的有限元计算结果进一步表明，本文提出的CFRP与钢板的界面粘结剪应力计算公式是有效的。
应用推荐