The nonlinear finite element analysis theory and method for the suspension bridge with concrete stiff girder was studied in the chapter 4 and 5.
第4、5章研究含混凝土加劲梁的悬索桥非线性精细计算理论、计算方法。
Based on the geometrical nonlinear finite element (GNFE) theory, a curved quadrilateral isoperimetric element with 8 nodes for initial form analysis of tensile membrane structures is presented.
本文根据几何非线性有限元理论，提出张力膜结构初始形态分析的8结点曲面四边形等参单元。
In this paper the basic theory of temperature field analysis and the solution method of FEM (Finite Element method) are introduced.
讨论了温度场分析的基本原理以及有限元解法。
This method takes advantage of the dynamic simulation function of finite element analysis and the thermodynamic theory to calculate the value of thermal flux.
该方法利用动力学分析功能，结合传热学原理求解热流传递数值；
Based on elastic FEM theory and heat transfer theory, the author USES I-DEAS software as a CAE tool, builds the finite element analysis method and techniques of the principle shaft system on work.
本文采用I -DEAS软件作为计算机辅助分析的工具，基于弹塑性有限元理论和传热学理论，建立了工作状态下主轴系统的有限元分析方法及技术处理方法。
Introducing heat exchange theory and finite element theory, and deducing the theory that applies finite element method to thermal analysis and thermal stress analysis.
介绍了传热学基本理论知识，有限元方法思想。对有限元法在热分析和热应力分析中的具体应用进行了理论推导。
Based on geometrical nonlinear finite element theory, a curved quadrilateral isoperimetric element with 8 nodes for initial form analysis of tensile membrane structures is presented.
根据几何非线性有限元理论，提出张力膜结构初始形态分析的8结点曲面四边形等参单元。
Finite element analysis for constraint model was conducted on the gear box casing of 7ypj agricultural tricar using modal analytic theory according to its structural characteristics.
针对7ypj型农用三轮汽车齿轮箱体的结构特点，应用模态分析理论对其进行了约束模态的有限元分析。
Finite element and modal analysis are the support of theory.
有限元法与模态分析法是本文的两大理论支柱。
Compared the experiment result with the theory analysis result, the error of the theory calculation is proved acceptable. The finite element modeling is validity.
将试验结果与理论结果对比，理论计算误差在可接受的范围内，说明有限元建模比较合理。
With the results of the multi-ribbed wall tests and finite element analysis, the shear capacity formulas of a oblique section based on ultimate balance theory are given.
并在试验结果与有限元模拟的基础上，依据极限平衡理论，建立起来复合墙体的斜截面抗剪极限承载力公式。
The result uniformity of theory and test illustrates the simulation analysis method with finite element can be used to evaluate the reinforcement effect of bridge well and truly.
理论分析与荷载试验结果的一致性表明采用有限元仿真分析方法能够对桥梁加固效果进行准确的评价。
An automotive CAE software based on automotive theory, finite element analysis and optimization design has been developed to resolve relevant engineering problems.
基于汽车理论、有限元分析和优化设计方法，为解决工程实际问题，开发了汽车CAE软件系统。
Abstract: the method of fast finite element analysis of sheet metal forming based on deformation theory was explored, and the computer program was implemented.
文摘：研究了基于形变理论的金属板料成形快速有限元分析的方法——反向方法，并实现了计算程序。
The research about finite element analysis for two-dimensional thermal structures with uncertain parameters has extensive engineering-background, important theory meaning and academic value.
不确定性参数的二维热结构有限元分析研究有着广泛的工程背景和重要的理论意义与学术价值。
Coupling analysis method of finite element and infinite element is proposed to be used in the structural anti-seismic analysis of metro tunnel on the basis of soil-structure interaction theory.
在土体与结构动力相互作用理论的基础上，提出用有限元和无限元耦合分析法对地铁隧道结构进行抗震分析。
Based on the theory of elastic-plastic deformation, according to the finite element method, this paper presents a nonlinear analysis of the distribution of the soil pressure of the ditch conduit.
表明对大型沟埋式管道的上压力，采用弹塑性理论的非线性分析是比较符合实际的，其结果可供设计参考。
Based on continuum theory, the vibration of pipeline in LPG filling stations has been analyzed by using the finite element program (SAP5) of structure analysis.
应用连续体振动理论和SAP5结构分析有限元程序，分析了液化石油气充瓶站管线振动问题。
In this paper, the work behaviors of steel-concrete composite beam are studied by the theory analysis and finite element analysis.
本文将“理论分析”和“有限元分析”相结合来研究钢与混凝士组合梁的工作性能。
The relative theory and methods on the analysis of the fatigue and fracture of mechanical components by means of the finite element method are discussed.
系统阐述利用有限元法对机械结构零部件进行疲劳断裂分析的相关理论和方法。
The theory and method of finite element analysis of sheet metal forming based on deformation theory was explored, and the computer program was implemented.
研究了基于形变理论的金属板料成形有限元分析的理论和方法，并实现了计算程序。
Based on the stiff analysis of lathe's tailstock by the theory of finite element, the measure has been put forward to improve the unreasonable structure used at present.
并运用有限元理论对普通车床尾架体进行了刚度分析，对目前使用的不合理结构提出了改进措施。
Due to the special manufacture craft and the new structure of laser welded dimple-plate jacket, it is necessary to be studied by experimental and theory analysis (mainly finite element analysis).
由于激光焊蜂窝夹套的特殊制造工艺及其新颖结构，需对其进行一个系统的实验研究和理论分析(主要是有限元数值模拟分析)。
Applying the theory of structural finite element method, the corresponding structural analysis program system is developed.
结合结构有限元的理论，研制了相应的结构分析程序系统。
The paper briefly introduces some methods of soil slope stability analysis most in use, such as various methods by utilizing ultimate equilibrium theory and method of finite element.
简介了几种常用的土质边坡稳定性分析方法，如利用极限平衡理论的各种方法及有限元法。
Stability analysis is carried out with prestressed spatial steel structures according nonlinear finite element theory.
基于非线性有限元原理对预应力空间钢结构进行了稳定性能分析。
According to the deformation of elastic-plastic theory, the finite element analysis model of metal diaphragm for tank of propulsion system in satellite was established in this paper.
根据弹塑性有限变形理论，用有限元法建立了卫星推进系统贮箱金属膜片变形的有限元分析模型。
According to the deformation of elastic-plastic theory, the finite element analysis model of metal diaphragm for tank of propulsion system in satellite was established in this paper.
根据弹塑性有限变形理论，用有限元法建立了卫星推进系统贮箱金属膜片变形的有限元分析模型。
应用推荐