The Finite Element Analyses (FEA) of complex constructions need huge memory and consume much time.
复杂结构的有限元分析需要耗费巨大的内存和计算机时间。
The derived harmonic settlements are then introduced in finite element analyses of the tank structure.
然后利用分析得到的谐波沉降对储罐结构进行了有限元分析。
Methods ct imagine processing, contour lines of cross-sections information processing, numerical finite element analyses.
方法CT图像处理、截面轮廓线信息处理、数字有限元分析。
Finite element analyses performed using this model indicate that it may be useful for a number of types of practical problems.
用这种模型所作的有限元分析表明，对于许多实际问题这种模型都是适用的。
Linear static behaviors of the floating-roof tanks under harmonic settlement are studied systematically by finite element analyses.
通过有限元分析，系统研究了谐波沉降下浮顶罐结构的线性静力性能。
The problem often arrived when finite element analyses for the structure with a few components damaged or some elements yield, etc.
结构局部刚度改变问题在结构有限元计算时常会遇到，例如：结构物个别构件的破坏或损伤，构件的局部屈服等等。
Non-linear finite element analyses were also carried out and the stress distribution pattern in the wall was consistent with the experimental results.
对试件进行了非线形有限元分析，得到的应力分布与试验破坏现象一致。
The models of the connecting rods and principal axis neck are built, and the finite element analyses have been done to them by using ANSYS engineering software.
利用ANSYS有限元分析软件分别建立曲轴连杆轴颈、主轴颈圆角滚压模型，进行变形分析计算。
The calculated results showed good agreement with the prediction from corresponding finite element analyses proving the proposed method was correct and effective.
计算结果与有限元数值分析比较，证明了该方法的有效性和正确性。
In the research work, finite element analyses is adopted to study the velocity wave and the secondary flow of nonlinear pulsatile flow in the S-shaped curved arteries.
本课题采用有限元分析方法研究非线性脉搏波在S型血管中的速度波，二次流。
The paper processed kinematics simulations and lower-control arms force solutions to the front Macpherson suspension, then did static finite element analyses and modal analyses.
本文对某微型车的前麦弗逊式悬架进行了运动学仿真分析和横摆臂受力求解，再对横摆臂进行了静态和模态的有限元分析。
Based on three dimensional finite element analyses of magnetic fields, the cogging torque of a prototype motor is calculated using the virtual work and Maxwell stress tensor methods.
在电机内磁场三维有限元数值分析的基础上，采用虚位移和麦克斯韦张量两种不同的方法计算了电机的脉动转矩。
The dynamic calculations of the model and prototype structures are also made using structural finite element analyses programs and the results are compared and analyzed with the test.
同时，应用结构有限元分析程序对模型及原型结构进行动力计算，并将两种结果进行比较分析。
This paper primarily aims at the deficiency of conventional computation method of skew girder Bridges, calculates and analyses skew girder bridge based on integrated finite element method.
本文主要针对斜梁桥传统计算方法的不足，采用组合有限单元方法计算分析斜梁桥问题。
This paper analyses three-dimensional stress distributions of the stud anchor chain by the theory of finite element and boundary element.
本文应用三维边界元法和三维有限元法对有挡锚链进行了三维应力分析，并将其结果与电测实验数据作了比较，吻合得很好。
Base on of the basic theory of stability analyses, Finite element model building and the elements selection are analysed.
基于拱桥稳定性分析的基础理论，给出拱桥有限元建模的单元选取及建模方法。
Next, it summarizes the method of setting up flexible sugarcane, and analyses the finite element method of mechanical system containing flexible grider theoretically.
其次，研究了柔性化甘蔗的建立方法并选择适于研究甘蔗收割机的方法，并从理论上分析含柔性梁机械系统的有限段方法。
Adopting linear and nonlinear bearing model, this paper analyses the deformation and stress of bearing with large radius, basing on nonlinear finite element analysis method.
基于非线性有限元分析方法，采用了线性轴承模型和非线性轴承模型分析了大型四点接触球轴承的变形和受力。
The simulated results from experimental stress analyses agree with calculating data of finite-element numerical method very well.
实验应力分析模拟结果与有限元数值法吻合较好。
The proposed method can be used in the analyses of cracks, deformations, bond behaviour and finite element methods.
建议的方法可用于裂缝、变形、粘结性能和有限元法的分析。
In addition, it analyses the crack resistance of the walls of huge reinforced concrete cylindrical tanks under prestressed measures by finite element analysis software of ANSYS.
另外还运用有限元程序ANSYS对预应力抗裂措施下的大型钢筋混凝土水池池壁类结构形式进行了仿真计算分析。
Using the method of mode analysis, the author analyses the hookup on the way of finite element, and gives the dynamic characteristic of hookup.
利用模态分析的方法，对悬挂装置进行有限元动力分析，得到了悬挂装置的动态特性。
This paper analyses grouting reinforcement's influence on slide plane and surrounding rock stability during the construction in Caijiapo tunnel, using the elastoplastic finite element method.
采用弹塑性有限元法分析了柴家坡隧道在施工过程中注浆加固对滑动面和围岩稳定性的影响。
In this paper, the detailed theoretical analyses are given, and the computer program is also presented based on the finite element method.
本文对这类结构进行了详细的理论分析，并根据有限元法编制了相应的电算分析程序。
The essay analyses free vibration problem of laying bed build-up board of antisymmetry angle with spline finite element method.
本文用样条有限元法，分析了反对称角铺设层合板的自由振动问题。
Because of the complexity of the car door's structure, the finite element nonlinear analyses under the two load cases have to deal with contact problems.
由于轿车车门结构的复杂性，在这两种载荷下的分析计算又涉及到有限元接触问题。
This paper adopts the three-dimensional finite element model, analyses the mechanical tendency with the variety of the thickness and modulus of the pavement structure.
采用三维有限元计算模型，分析了路面结构厚度和模量变化时的力学响应变化趋势。
Large deformation theory and virtual work principle were applied to analyses high - speed machining process, the finite element governing equation was approached based on Lagrangian description.
依据大变形理论和虚功原理对高速切削过程进行分析，建立了基于拉格朗日描述的有限元控制方程并采用二维有限元模型进行模拟。
This paper also analyses and forecasts the settlement by means of the ADINA-a finite element software and works out some laws of the non-soft ground in distortion.
根据试验数据分析了青银高速公路河北段非软路基的沉降变形，同时采用大型有限元软件ADINA对该试验段进行分析和预测，得出了非软路基变形的部分规律。
This paper analyses some important factors which cause discretization error in linear eddy-current problems by the finite element method.
本文以一个典型二维涡流场问题作为计算实例，分析了■有限元法求解线性涡流场时产生离散误差的主要因素。
应用推荐