Build finite element model of main structure of container crane for finite element analyse.
建立集装箱起重机结构的有限元模型。用于有限元分析。
The essence of Finite Element analyse is FEA about engineering structure dispersed into all kinds of element by using node connection.
有限元的实质就是将工程结构离散为各种单元以节点连接的计算模型。
This article advanced a general finite element analyse model which is suitable for any roller number for the roller-type overrunning clutch outer loop.
针对滚柱式超越离合器外环提出一种适用于滚柱数目为任意个的通用应力分析模型。
Expression of angle section based on the result of ANSYS finite element analyse is presented at last, which provide the basis for the design of bolt- Angle beam-to-column Connection.
最后依据有限元结果分析，提出角钢截面的计算公式，为螺栓—角钢梁柱连接节点设计提供了依据。
Result that finite element analyse indicate that rock slop and road cuttings with root system's deformation is smaller obviously than rock slop and road cuttings without root system's.
有限元分析的结果表明，有根系岩质路堑边坡表层土体的变形明显小于无根系岩质路堑边坡表层土体的变形。
At last, using finite element analyse software, the composite laminate camera mount is simply optimized aiming at maximizing its first natural frequency, which has an increase of 28.88%.
最后，借助有限元分析软件，对复合材料相机支架进行了以基频最大化为目标的简单优化设计，将相机支架的基频提高了28.88%。
It is convenient to use finite element method to analyse the coupled problem of consolidation and deformation based on Biot's consolidation theory.
用有限单元法分析软土地基的固结与变形耦合问题可以为求解皮奥特固结方程提供方便。
On the base of above research, stochastic finite element method was adopted to attempt to analyse reliability of the piezoelectric truss structure.
在此基础上引入随机有限元法，对该桁架系统进行结构可靠性初探研究。
In this paper, finite element method is used to analyse the deformation of the slope and ground surface of Fushun west open pit.
本文应用有限单元法对抚顺西露天矿北帮边坡及地表变形进行分析。
Metbods: a two dimensional finite element model was built up to analyse the stress within the periodontal tissue of the first molar, with a reduced tooth eruption-resistant force.
方法：用二维有限元法分析阻萌力减少前后下第一磨牙牙周组织内应力分布的变化。
The paper presents a new type CAM reductor, and also USES finite-element method to analyse the mechanical character of the new type CAM reductor.
提出一种新型凸轮减速器，用有限元方法分析了这种新型凸轮减速器的力学特性。
A nonuniform beam finite element is presented and the element stiffness matrix and equivalent joint load are derived to analyse nonuniform members used increasingly in engineering structures.
针对工程结构中广泛应用的变截面构件，提出了一个变截面平面梁单元，推导了其单元刚度矩阵和等效节点荷载公式。
BP network train sample mode analyse the income by finite element model.
BP网络训练样本由有限元模型模态分析所得。
The result shows seven-freedom unit finite element method has high precision to analyse simple beam of rectangular section, it can replace complex analytic solution.
说明采用七自由度单元的有限元法进行矩形截面简支梁的弯翘分析，有很高的精度，可以代替繁琐的解析解。
Numerical examples show that the incremental finite element method presented in this paper can analyse the geometrically nonlinear problems of space trusses satisfactorily and effectively.
算例表明：采用本文理论可以极为有效地分析各类空间桁架几何非线性问题。
In this paper, the elastoplastic incremental finite element method with variable plastic stiffness is used to analyse the surrounding rock stability of underground openings.
本文采用三维弹塑性增量变塑性刚度有限元法计算地下洞室围岩稳定。
An isoparametric finite element program of large elastic-plastic strain (LEPS) is used to analyse the necking of a cylindrical bar and a plate specimen under uniaxial tension.
本文用弹塑性大应变问题的等参数有限元分析程序(LEPS程序)，对平板和圆棒试件的颈缩作了较全面的分析。
The authors, using the finite element method, analyse the rules of continuous deep beam internal forces under the influence of the support plate width.
作者以有限元法分析了连续深梁的内力受支座垫板宽度影响的变化规律；
RVE is calculated with the finite element method and the Mohr-Coulomb damage rules are employed to analyse the calculation result.
本文还对体胞单元进行了有限元计算，并应用莫尔——库仑破碎准则对计算结果进行分析。
The finite element method is used to analyse the deformation and stress of surrounding rock.
采用有限元法对地下厂房开挖时围岩的变形和应力情况进行了分析。
Based on the definition simple beam, the finite element method is used to analyse some simple beams, with symmetric structure and loading, and symmetric beams, with different support.
从简支梁定义出发，应用有限元法，对结构、受力对称的简支梁以及不同支承的对称梁进行了计算。
In this paper, a finite element method with lumped mass formulation is applied to analyse the transient SH wave propagation in an elastic half-space with a dipping layer.
本文采用一种类似于差分方法的集中质量有限元模型和人工边界透射理论分析倾斜成层弹性半空间中瞬态SH波的近场波动问题。
Then, simply introduce the finite element theory foundation of computer simulation technology, analyse and sum up the application trait and function of the sheet forming simulation software-DYNAFORM.
其次，简要介绍了计算机仿真技术所依赖的有限元理论基础，并对板料成形专用有限元模拟仿真软件dynaform的应用特点及功能做了总结和分析。
The preprocess of finite element method analyse model in ZiRui CAE2.0 software is introduced.
介绍了紫瑞cae2.0软件有限元分析模型的前处理。
In this paper the finite element method is used to analyse the free vibrations of the ship bottom plates contacting with surrounding water.
本文用有限元法分析与舷外水相接触的船底板的自由振动。
The finite element method is used to analyse the natural vibration of a exhaust chimney with steel structure in a nuclear power plant, such as the first, the second frequency and their model.
利用有限元法分析了某核电站排气钢塔的固有振动特性，即一阶、二阶振动频率及振型。
In this paper the finite element method is combined with optimization. The strengthening optimization is put forward on the basis of the limit analyse method of pressure vessel strengthening design.
将有限元应力分析方法与优化设计方法相结合，提出了基于受压容器开口补强的极限分析理论和优化设计思想。
In this paper, the finite element method is used to analyse the dynamic properties of a diesel locomotive body.
本文采用有限元方法对内燃机车车体的动态性能进行分析，计算结果与实测有较好的吻合。
In this paper, the finite element method is used to analyse the dynamic properties of a diesel locomotive body.
本文采用有限元方法对内燃机车车体的动态性能进行分析，计算结果与实测有较好的吻合。
应用推荐