Isoparametric element of arbitrary hexahedron plays an important role in finite element analysis.
等参数任意六面体单元在有限元分析中有着重要的作用。
ANSYS is a general finite element analysis software. And mesh dividing is an important part of finite element analysis with ANSYS.
ANSYS是一个大型通用的有限元分析软件，网格划分是利用ANSYS进行有限元分析的一个重要环节。
Through an example, experiment and finite element analysis were done, and then the validity of the model and the accuracy of the method are verified.
针对具体实例，进行了有限元分析和实验研究，证实了理论模型的正确性和计算方法的精确性。
An axisymmetrical finite element analysis is also made, with which the secondary cracking load and the end slip after secondary cracking can be predicted.
又作了轴对称的有限元分析，能估算次生裂缝出现时的荷载以及次生裂缝出现后的端部滑移。
Making an example of finite element analysis for a RC deep beam, the author compares and analyzes the feature, accuracy and reliability of these elements.
然后用一个RC深梁的例子，比较分析了三类单元的特点以及计算结果的精确度和可靠性。
Finite element analysis method is an effective method for calculating thermal stress, but the temperature parameters for calculation have no uniform standard.
有限元是计算温度应力的很好方法，但是对于计算中所需的温度参数取值并没有统一的标准。
This work expands the application range of ABAQUS in elastoplastic finite element analysis, and set an example for developing other functions of ABAQUS and finite element software.
论文所完成的工作扩大了ABAQUS在弹塑性有限元分析中的应用范围，并为ABAQUS其他功能的开发以及有限元程序的开发提供了借鉴。
As an example, Finite element analysis and optimization design are made to a voltage transformer of rating primary voltage 35KV, rating secondary voltage 100V, rating frequency 50HZ.
并以额定一次电压35KV，额定二次电压100V，额定频率50HZ的电压互感器为例，进行了有限元分析计算和优化设计。
Possibility and efficiency in the application of this method to large finite element analysis are illustrated by an example of the stress analysis for a section of a cable stayed bridge.
以斜拉桥桥段的应力分析为例，说明在大型有限元分析中采用分阶段计算方法的可能性和有效性。
Finite element method of oil film capability is a basis of this papers research work, and it is also an important research method.
油膜性能的有限元算法是本文研究工作的一个基础，也是一个重要的研究方法。
Skeleton is a representation of an object which has been shown to useful in interrogation, animation, finite element mesh generation, path planning, and feature recognition.
骨架是物体的一种描述方式，它广泛应用于道路探询、动画、有限元网格生成、路径规划和特征识别等领域。
Graphics software is an important part of a finite element system for sheet metal forming.
在板料成形有限元模拟软件系统中，图形平台是重要的组成部分。
A numerical model based on the finite element method incorporating an arc-length algorithm for nonlinear full-range analysis of UPC beams was developed.
建立了基于有限元方法并结合一种弧长算法的适用于UPC梁非线性全过程分析的数值模型。
This paper describes a method based on the generalized principle of virtual work to derive the hybrid model of finite element. An assumed-strain hybrid model was obtained.
本文提出用广义虚功原理的方法建立有限元的杂交模型，并具体导出了一种杂交应变模型。
A transfer procedure plays an important role in adaptive finite element applied to the load history-dependent problems in connection with evolving meshes.
对于依赖于加载历史的自适应有限元分析问题，不同网格间力学结果的传递过程起着重要作用。
Combining with an engineering instance, basing on the current specifications and a certain construction, the transfer girder structure is analyzed by the method of finite element.
根据现有规范规定，结合工程实例，本文提出了钢骨转换梁与上部剪力墙共同作用的结构的截面极限承载力的计算方法；
Complex analysis is an effective finite element method to simulate the dynamic response of rock soil mass to earthquake.
复反应法是用来分析地震动力作用下岩土体动力性质的有限元方法之一。
In this paper, a composite grid method (CGM) for finite element (FE) analysis of an electromagnetic field with strong local interest is proposed.
本文描述了对有需要着重分析的局部区域的电磁场进行有限元分析的复合网格法。
The effects of sediment on the hydrodynamic pressures acting on rigid dams during vertical ground motion were studied By use of an explicit finite element scheme in this paper.
作者应用时域显式有限元模型分析了可压缩库水条件下淤积泥砂对垂直地运动作用时刚性坝面上动压力的影响。
An effective vector finite element method (FEM) for analysis of 3d radiation problem is proposed.
提出了一种用于3 -D电磁辐射特性分析的快速有限元方法。
This paper describes a finite element method analysis of an acoustically transparent planar PVDF hydrophone.
本文介绍了一种透声面元PVDF水听器的有限元分析方法。
The entire structure non linear finite element fire resistant response method in an overall process analysis is emphatically discussed.
重点对整体结构有限元非线性抗火反应全过程分析方法进行了讨论。
It is effective to use finite element method in monolithic analysis of an elastic foundation with the frame on it.
用有限单元法对弹性地基和上部框架进行整体分析，是一种有效的办法。
Combining with finite element method, fracture mechanics has been an important way to solve crack problem in road field at present.
将断裂力学理论与有限元方法结合是分析路面开裂问题的有效途径。
This paper has made use of a set of measured incomplete modes to improve an analytical finite element model of the structure under consideration.
本文利用一组实测的不完全模态对所考虑结构的有限元理论模型进行修正。
Finite element method is an useful tool for modeling seismic wave in complex medium, it simulates seismic wave propagation quite realistically and displays seismic wave fields in quite detailed way.
有限元法是复杂介质地震模拟的有力工具，它能比较客观地反映地震波的传播过程，比较细致地再现地震图像。
An algorithm of hole repairing for finite element mesh is proposed in the paper which is based on surface.
针对板料成形零件的有限元网格模型提出了一种基于曲面的网格孔洞修补算法。
Symmetrical folding of a single layer and folding process of an overfold are analyzed by using the finite element method.
本文采用有限元方法，分析单层对称褶皱作用和一个天然倒转褶皱的变形过程。
Symmetrical folding of a single layer and folding process of an overfold are analyzed by using the finite element method.
本文采用有限元方法，分析单层对称褶皱作用和一个天然倒转褶皱的变形过程。
应用推荐