A software of simulating water movement in confined aquifer was developed with finite different method.
根据有限差分方法，编制了承压含水层渗流模拟软件。
This model has simulated redistribution of infiltration and soil-water due to precipitation and irrigation at the profile by finite different method.
此模型通过有限差分法模拟了降雨或灌溉水人渗、降雨或灌溉水以后土壤水分在剖面上的重新分配情况。
The paper describes the two-dimension electric-magnet field of the GMA by the finite different method including its theory and application. Also the structure and principle of GMA is studied.
利用有限差分法求解GMA二维电磁场问题，在超磁致伸缩电—机械转换器结构研制的基础上，结合有限差分法计算原理及应用问题对GMA的电磁场进行数值计算。
Thus, nodal code of Finite Element Method can be parallelized and operated in the connecting point of different groups of PVM.
因此，有限元节点代码可以被并行化、并能在基于不同的PV M机群结点上运行。
Take pin threads of NC50 drill collar as an example, Finite Element Method is used to analyze the different stress-relief grooves of pin thread connection.
以NC50型钻铤公螺纹作为研究对象，用有限元方法对加工有不同应力减轻槽的钻铤公螺纹接头进行了分析计算。
The common hypotheses of the shell structure aren't alterative in the new finite element method and it finishes the solution through the integral of the different laminas.
新单元的计算方法不改变壳体结构的一般假设条件，利用厚度方向分段积分来完成问题的求解，并对层合截锥壳进行计算。
The method for computing finite rotations is different from that of the translation displacements.
有限转动角的计算和迭加方法与线位移不同。
In the analysis, the finite element method and other simplified methods are compared using different models of lateral soil stiffness.
采用不同桩侧土抗力与桩身位移关系的模式，以有限单元法进行分析；
Finite-difference iterative method is used for numerical solution, and some curvatures varied with different parameters are obtained.
应用差分迭代方法进行了数值求解，得到了液晶指向矢随不同的参数变化的曲线。
The paper presents the research into the stress state of roller teeth using FEM (finite element method). The results show that different structure parameter causes a change in roll stress.
采用有限单元法对轧辊辊齿的应力状态进行了研究，得出了不同结构参数对轧辊应力变化的影响。
Magnetic particle clutches distribution of temperature field at every different work condition was analyzed by finite difference method.
用有限差分的方法分析了磁粉离合器在各种不同工况下的温度场分布，并设计了相应的计算程序。
Second, using large-scale finite element method software—MARC establishes the rolling model, and compiles the process file, and sets up the different rolling condition parameters.
运用大型有限元软件MARC，建立轧制模型，编写过程文件，设置不同的轧制条件参数。
The new method is different from the finite dimensional approximate solution.
这种求分歧值近似解的方法与有限维近似解法有本质的不同。
Principles of fuzzy neural network and FNN method are adopted for the numerical simulation of network modeling and forecasting of beams with finite deformation of two different materials.
本文运用模糊神经网络原理，采用学习结合型FNN方法，针对两种不同材料梁的大变形进行了网络建模和预测的数值仿真。
Based on the deployable structure of a mirror and the operation principle, the finite element method was used to analyze the unit naked mirror and some different mirror support schemes.
基于展开镜结构工作原理，运用有限元方法分析了展开式反射镜单元的裸镜及其支撑方案。
The influence of different EB scanning tracks on the brazing temperature field is discussed by the finite element analysis method.
本文通过有限元分析的方法讨论了不同电子束扫描轨迹对钎焊温度场的影响；
The satisfactory results are obtained by using concrete calculative examples, A new method is provided to carry out finite element stress analysis for different modulus material.
经过实例分析计算，获得了满意的结果。为对这类材料的结构进行有限元应力分析提供了一种新方法。
In this paper, mechanism of one - and two-phase fluid flow in fractured media with different structures under electric fields was systematically investigated by finite element method (FEM).
采用有限元数值模拟方法系统地研究了电场作用下不同结构裂缝介质中单相和两相渗流机理。
Objective to predict the stress distribution of atlas under different pre-trauma postures by finite element method, and to deduce the sites of atlas fracture accordingly.
目的采用有限元方法，预测寰椎在不同位置条件下寰椎应力的分布，并以此推断可能出现的寰椎骨折类型。
The temperature fields of the membrane waterwall in burner zone of a 600 MW boiler under different supercritical conditions are analyzed and calculated based on finite-element method.
基于有限元法对某电厂600MW机组锅炉在不同超临界工况下燃烧器区膜式水冷壁的温度场进行了分析和计算。
In this paper, the WKB method and the finite-difference time-domain (FDTD) method are applied to study the electromagnetic characteristics of target coated with different plasmas.
本文较系统地用WKB方法和FDTD方法研究了不同等离子体覆盖导体目标的电磁特性。
The stress states of the ceramic nozzles with different entrance angle in the sand blasting process are analyzed with finite element method .
运用有限元法分析了不同入口锥角的陶瓷喷砂嘴冲蚀过程中的应力状态。
When treating the finite element models of the composite structure, this paper presents a "virtual beam" element mode relaxation method for the accordance of different elements.
在处理组合结构有限元模型时，对不同类型单元之间的协调提出一种“虚梁”单元节点松弛方法。
The finite element method is a dispersed method, so it can be used directly to calculate the status for different loads, rigidity, etc.
有限元法是一种离散化的方法，它可以直接用来计算荷载不同、刚度不同的各种情况。
A group of hybrid flexure hinges with different corner filleted radius are analyzed using finite element method, and their flexibility stress ratios are achieved.
通过有限元方法，分析了一组不同导角半径的混合铰链设计实例，并得到其柔度应力比值。
The natural frequencies of beam are calculated with finite element method in the cases of different crack width and different crack depth.
本文利用有限元法分别计算在不同的裂纹深度、不同的裂纹开口宽度的情况下梁的固有频率。
The natural frequencies of beam are calculated with finite element method in the cases of different crack width and different crack depth.
本文利用有限元法分别计算在不同的裂纹深度、不同的裂纹开口宽度的情况下梁的固有频率。
应用推荐