The stress and deformation of crankshaft are calculated by finite element method with six load boundary conditions and three displacement boundary conditions.
分别采用六种载荷边界条件和三种位移边界条件对曲轴应力和变形进行了有限元分析；
Method the Finite Element Method was employed to perform the stress analysis on this valve, which included the material nonlinearity, large deformation and the contact condition.
方法考虑材料非线性，大变形和接触条件建立有限元模型，采用有限元法进行应力分析。
Finite Element Method is used to calculate the maximum bending moment and axial force of lining and its deformation.
利用有限元法计算了考虑衬砌接头和不考虑衬砌接头两种情况下衬砌的内力和衬砌的变形。
It is convenient to use finite element method to analyse the coupled problem of consolidation and deformation based on Biot's consolidation theory.
用有限单元法分析软土地基的固结与变形耦合问题可以为求解皮奥特固结方程提供方便。
The analysis of stability and deformation of the third stage core cofferdam of the Three Gorge Project is performed by the uncoupled finite element method.
利用非耦合的有限单元法分析了三峡工程三期心墙围堰方案中围堰的稳定性和变形情况。
In this paper, an engineering assessment method of elastic-plastic fracture based on finite deformation analysis of complex structures. or a modified COD -design equation, presented forward is put.
文章在有限变形分析基础上建立了对复杂结构进行弹塑性断裂评定的工程方法，用以修正COD设计曲线。
The mathematical model of fluid percolation and rock deformation of fluid-solid coupling is solved with the finite difference method and the finite element method respectively.
分别采用有限差分法和有限元法对流固耦合流体渗流数学模型与岩石变形数学模型进行了求解。
Computation and analysis of the cylinder block stress and deformation are conducted on a 6125q diesel engine in supercharged or cylinder diameter enlarged situation by using the finite element method.
本文应用有限元法，对6125Q型柴油机机体在增压和扩缸时的变形和应力进行了计算分析。
The finite strip method in structural analysis has been extended, and elastic-plastic large deformation spline finite strip method based on the Updated-Lagrange method (U.
拓展了结构分析有限条法，基于固体力学有限形变理论的更新拉格朗日法（U 。
Three-dimensional rigid-plastic finite elements, elastic finite elements and influential function method for the analysis of deformation of rolls system are combined.
它耦合了三维刚塑性有限元法，弹性有限元法和计算辊系变形的影响函数方法。
With the non-line finite element method, the numberical value calculation on the stress and deformation of surrounding rock of deep mine roadways has been presented.
采用非线性有限元法，对深井巷道围岩应力及变形状态进行了数值计算。
Simulating the deformation of the steel plate by induction heating in Finite Element Method(FEM), including temperature analysis, stress analysis and deformation analysis.
对钢板感应加热成型进行有限元分析，包括钢板截面的温度分析，应力分析，变形分析等。
Finite element method was applied to analyze the main factors affecting buckling deformation features and forming process.
分析了影响管件屈曲变形特征和成形过程的主要因素。
Principles of fuzzy neural network and FNN method are adopted for the numerical simulation of network modeling and forecasting of beams with finite deformation of two different materials.
本文运用模糊神经网络原理，采用学习结合型FNN方法，针对两种不同材料梁的大变形进行了网络建模和预测的数值仿真。
Adopting linear and nonlinear bearing model, this paper analyses the deformation and stress of bearing with large radius, basing on nonlinear finite element analysis method.
基于非线性有限元分析方法，采用了线性轴承模型和非线性轴承模型分析了大型四点接触球轴承的变形和受力。
Adopting finite element analysis method, the stress and deformation of gear coupling is analyzed, the cause of gear coupling failure is found, and the structure is optimized.
运用有限元分析方法，对齿轮联轴器进行应力、变形的分析，找出齿轮联轴器的失效原因并对它的结构设计进行了优化。
Abstract: the method of fast finite element analysis of sheet metal forming based on deformation theory was explored, and the computer program was implemented.
文摘：研究了基于形变理论的金属板料成形快速有限元分析的方法——反向方法，并实现了计算程序。
The temperature field of the bar in and out the deformation zone during continuous rolling is simulate by finite element method.
采用有限元法分析了棒材连续热轧中变形区及出变形区时轧件横断面温度场。
A finite element method for contact problems is developed to study the interaction mechanism between landslides and tunnels and to analyze the deformation of the tunnels in landslides.
为研究滑坡隧道间的相互作用机理及受力变形规律，应用接触问题的有限元算法对这一问题进行了计算分析。
With the dynamic explicit elastic plastic finite element method, the unsteady deformation of the bite stage in slab rolling was simulated.
采用显式动力学弹塑性有限元方法，对平板轧制过程中咬入阶段的非稳定变形进行了数值模拟。
The article introduces several structural models, as well as analyzes the stress deformation feature of concrete face rockfill dam using two dimension finite element method.
介绍堆石体的几种本构模型，用二维有限元方法分析了混凝土面板堆石坝的应力变形特性。
The effect of the whisker rotation on the hot compressive deformation behavior of the whisker reinforced aluminum matrix composite is investigated by the plane strain finite element method.
采用平面应变有限元方法研究了晶须转动对晶须增强铝基复合材料热压缩变形行为的影响。
The deformation of rolled piece in conjugate deep cut pass is simulated by finite element method. The error of simulated result is less than 1%.
用有限元法对共轭切深孔中轧件的变形进行了计算机模拟，模拟计算结果误差小于1%。
The theory and method of finite element analysis of sheet metal forming based on deformation theory was explored, and the computer program was implemented.
研究了基于形变理论的金属板料成形有限元分析的理论和方法，并实现了计算程序。
The finite element method is used to analyse the deformation and stress of surrounding rock.
采用有限元法对地下厂房开挖时围岩的变形和应力情况进行了分析。
The billet deformation behavior, the magnitude and distribution of effective strain and damage value were investigated by rigid-plastic finite element method during multi-axial compressions.
采用刚塑性有限元法研究了多轴压缩过程中的坯料变形行为、等效应变大小、分布以及损伤值。
A general practical finite element analysis model for two-dimentional elastic large deformation contact problems was established using the TL method.
用TL法分析研究，建立了二维弹性大变形接触问题的一般实用有限元分析模型。
It makes use of finite element method to carry out the numerical value simulation by software in reality in order to get the condition of strain and deformation on the main axle installing.
利用有限元法，通过有限元分析软件对其实际工况进行整体结构数值模拟，得出主轴装置在实际工况下的应力、变形情况。
The bulk metal forming processes are calculated and analyzed by using a multi - step finite element method (FEM) based on deformation theory of plasticity.
运用一种基于全量理论的多步有限元方法计算分析了金属体积成形过程。
The bulk metal forming processes are calculated and analyzed by using a multi - step finite element method (FEM) based on deformation theory of plasticity.
运用一种基于全量理论的多步有限元方法计算分析了金属体积成形过程。
应用推荐