Some kinds of numerical computation methods are recommended systematically including finite volume method, finite analysis method, finite element method and self-fit mesh method.
本文系统地介绍了数值计算中的各种方法，主要有有限体积法、自适应网格、有限分析法、有限元法等。
Advanced numerical simulations were introduced in soil water research, such as finite analysis method, characteristic finite element method, and alternating direction finite element method.
土壤水研究的数值模拟方法也有一些突破，如有限解析法、特征有限元法、交替方向有限元法等。
To avid this computational error, it comes forth finite contact elements analysis method.
为了消除这种计算误差，出现了有限元接触分析方法。
The theoretical analysis and numerical experiments show that the multiscale finite element method presented in this paper is very effective to solve above these kinds of problems.
理论分析和数值实验均表明：多尺度数值方法对求解多孔复合介质周期结构的热传导和质扩散问题是可行的和有效的。
Self adaptive finite element method has its important application value in the analysis of practical engineering problems.
自适应有限元方法在实际工程问题的分析中有重要的应用价值。
Slice method and finite element method are principal methods of soil slope stability analysis.
条分法和有限元法是土质边坡稳定分析的主要方法。
The category and reason for Finite Element Method analysis error are analyzed, and the adaptive mesh method is researched.
同时分析了有限元分析误差产生的种类及原因，并对自适应单元网格优化进行了研究。
The analysis result shows that it is a very feasible method for designing of nonstandard parts to adopt optimal technology based on finite element analysis.
分析结果显示，将基于有限元分析的优化技术应用于非标零件的设计是一种非常可行的方法。
Conclusion Three dimensional finite element analysis is a kind of convenient and practicable method to be used as the confirmation and supplement of experimental biomechanics study of human being.
结论三维有限元分析方法是一种简便实用的生物力学研究方法，可作为实验生物力学研究的验证和补充方法。
The engineering instance is calculated by ANSYS, the popular software for the finite elements analysis, and the results is same as that calculated by common method.
采用目前比较流行的大型有限元分析软件ANSYS对算例进行了分析计算，结果与常规计算方法的结果相符；
A numerical model based on the finite element method incorporating an arc-length algorithm for nonlinear full-range analysis of UPC beams was developed.
建立了基于有限元方法并结合一种弧长算法的适用于UPC梁非线性全过程分析的数值模型。
With the welding spot fatigue lifetime pre-estimation method, by combination of the finite element analysis and stress calculation, the welding spot fatigue damage under actual load can be calculated.
采用焊点疲劳寿命预估方法，通过有限元分析并结合应力计算，即可计算出实际载荷工况下的焊点疲劳损伤。
FEM (Finite Element Method) analysis technology has already been used widely in high precision stamping industries.
有限元法分析技术在高精密冲压行业中已经广泛应用。
In this master thesis, the stress-strain relationships of thin films were measured by nanoindentation combined with dimensional analysis and finite element method.
本文以纳米压痕法结合量纲分析及有限元方法来测量薄膜材料的应力-应变关系。
The finite element method was used for analysis of heat stress in chip on board(COB).
本文采用有限元法分析了板上芯片（COB）的热应力分布。
The finite element method was used for analysis of heat stress in chip on board (COB).
本文采用有限元法分析了板上芯片(COB)的热应力分布。
This paper suggests a finite element analysis method of the multilayer pavement with materials of nonlinearity.
本文提出了一个考虑材料非线性的多层路面应力分析的有限单元法。
Possibility and efficiency in the application of this method to large finite element analysis are illustrated by an example of the stress analysis for a section of a cable stayed bridge.
以斜拉桥桥段的应力分析为例，说明在大型有限元分析中采用分阶段计算方法的可能性和有效性。
The modal and harmonic response analysis of the structure were implemented using the finite element analysis method with ANSYS software.
使用有限元分析软件ANSYS对结构建模，并进行模态和谐响应分析。
By using multilevel substructure analysis and finite element displacement method, this system is suitable for various linear static analysis of aeronautical structures.
这一系统采用多级子结构分析技术，可以适应各种类型航空结构的线性静力分析。
By introducing the FEM, the mixed method is extended to perform finite element reliability analysis.
通过引入有限元方法，混合分析法可适用于结构可靠度问题。
Finally, the project is studied by finite difference analysis method and guidance for construction is brought.
最后，对实际工程进行数值分析，提出对施工中的指导意见。
The finite strip method in structural analysis has been extended, and elastic-plastic large deformation spline finite strip method based on the Updated-Lagrange method (U.
拓展了结构分析有限条法，基于固体力学有限形变理论的更新拉格朗日法（U 。
Using finite element analysis method, three-dimensional calculation is conducted for force summing on rod in high-inclination well of Liaohe tidal zone oilfield.
应用有限元法对辽河滩海油田大斜度定向井抽油杆柱受力进行了三维计算。
The influence of different EB scanning tracks on the brazing temperature field is discussed by the finite element analysis method.
本文通过有限元分析的方法讨论了不同电子束扫描轨迹对钎焊温度场的影响；
Finite element analysis method is an effective method for calculating thermal stress, but the temperature parameters for calculation have no uniform standard.
有限元是计算温度应力的很好方法，但是对于计算中所需的温度参数取值并没有统一的标准。
Adopting linear and nonlinear bearing model, this paper analyses the deformation and stress of bearing with large radius, basing on nonlinear finite element analysis method.
基于非线性有限元分析方法，采用了线性轴承模型和非线性轴承模型分析了大型四点接触球轴承的变形和受力。
On the constitutive laws of incompressible rubber like materials and the corresponding finite element analysis method.
讨论大变形拟不可压缩橡胶类材料的本构关系及有限元分析方法。
Adopting finite element analysis method, the stress and deformation of gear coupling is analyzed, the cause of gear coupling failure is found, and the structure is optimized.
运用有限元分析方法，对齿轮联轴器进行应力、变形的分析，找出齿轮联轴器的失效原因并对它的结构设计进行了优化。
Adopting finite element analysis method, the stress and deformation of gear coupling is analyzed, the cause of gear coupling failure is found, and the structure is optimized.
运用有限元分析方法，对齿轮联轴器进行应力、变形的分析，找出齿轮联轴器的失效原因并对它的结构设计进行了优化。
应用推荐