Comparative analysis of the results come from finite element program calculation and "code of reinforced concrete silo design" is carried out.
对有限元程序计算结果与钢筋混凝土筒仓设计规范方法计算结果进行了对比分析。
With the welding spot fatigue lifetime pre-estimation method, by combination of the finite element analysis and stress calculation, the welding spot fatigue damage under actual load can be calculated.
采用焊点疲劳寿命预估方法，通过有限元分析并结合应力计算，即可计算出实际载荷工况下的焊点疲劳损伤。
This paper deals with the necessary procedures and noticeable problems of the staged - calculation method in the structure finite element analysis.
本文讨论实现分阶段计算方法的具体措施和应该注意的问题。
Using the results from finite element analysis of turbine rotor suppressed in heat stress, and simplified theoretical calculation equations, a mathematical model is established.
采用汽轮机转子热应力的有限元分析结果和简化的理论计算公式，建立汽轮机转子热应力的数学分析模型。
The load analysis and calculation under wave action of this platform is developed, on this base, a three dimensional finite element strength analysis for main structural body is conducted.
展开了对该平台在波浪作用下载荷的分析计算，在此基础上对主体结构进行了三维有限元强度分析。
The reliability of this formula verified based upon example calculation, which is in good agreement with the experimental and finite element analysis results.
并取算例进行了计算，结果与试验结果和有限元结果都基本吻合，证明了公式的可靠性。
The calculation result is reflected into the finite element calculation model, and the durability analysis of parts is carried out according to the load of the bench experiment.
将冲压计算结果反应到有限元计算模型中，根据台架实验的栽荷，进行零件的耐久性分析。
The finite element analysis and calculation of heat transfer in ablating bodies are presented.
本文采用有限元法，分析和计算了有热解的再入烧蚀体的传热问题。
The finite element buckling calculation and analysis indicates that the buckling destruction of the pile won't take place.
试验桩的有限元屈曲计算与分析表明，该桩基不会发生屈曲破坏。
So the calculation and analysis on the blower rotor pan intensity are made through finite element method. It is concluded that after repair the blower can continue working safely.
因此，对该鼓风机转子轮盘的强度进行了有限元计算与分析，认为该鼓风机经过修复后是可以安全使用的。
Finally, the experiment results gained from the FBG sensor system and traditional PZT sensor are both validated by Finite Element Analysis (FEA) calculation.
最后，光纤光栅振动传感系统和传统压电陶瓷传感系统的实验结果还得到了有限元计算结果的验证。
Based on the calculation and finite element analysis of resonator, a new kind of resonant liquid density meter is designed.
在对圆筒谐振子的数学模型计算和有限元分析的基础上，设计了一种新型的谐振式液体密度传感器。
An analysis and calculation of the suspension system of maglev ball by finite element method (FEM) and similarity principle is presented.
提出用有限元法及相似原理来分析、计算磁悬浮球的悬浮系统。
And import the model into the finite element analysis software of ANSYS for modal calculation and analysis.
进而将齿轮的参数化模型导入通用有限元分析软件ANSYS，对其模态进行计算分析。
Numerical model for RTM process analysis is established by finite element method, and its calculation method is given.
本文建立了利用有限元法进行RTM工艺分析的数学模型，并给出了具体的计算方法。
The work summarized in this paper aims at improving the accuracy of rotor blade dynamics analysis, and that of its internal force calculation in particular, by the finite element method.
提高用有限元法进行桨叶动力分析、特别是动内力计算的精度是本文工作的主要目的。
In this thesis, stress analysis and calculation in the finite element for a large oxidized reactor in service in the PTA industry are finished by ANSYS software.
本文用ANSYS程序对在PTA工业中使用的某大型氧化反应器进行了有限元应力分析计算。
Described are the lightening design, energy absorption car-body design, finite element analysis, static strength test and modal analysis calculation.
介绍了北京八通线地铁车体钢结构的轻量化设计、吸能车体设计、有限元分析、静强度试验和模态分析计算。
It propose nonlinear dynamic analyzing model calculation method of the motor in the use of nonlinear magnetic path analysis and finite element calculation.
采用非线性磁路分析和有限元计算结合的方法给出了该电机的非线性动态分析模型计算的一种思路和方法，有助于电机设计分析。
Then simulating calculation of profiles and soundings of the DC electro-exploring method are numerically carried out, supported by ANSYS that is a software based on the finite element analysis method.
先从理论上作了分析，然后利用ANSYS软件进行了直流电阻率剖面和电阻率测深法的模拟计算。
In this article, different methods of approach to solve the flow within the turbo-machinery by means of the finite element analysis are introduced and a typical calculation given.
本文介绍用有限元法求解叶轮机械流动问题的各种不同的处理方法以及典型的算例。
The finite element modeling and mode analysis calculation to ATV motorcycle frame are introduced. Improved opinions are suggested to provide some reasons for further analysis.
同时给出了利用有限元法对沙滩摩托车车架建模及模态分析的计算过程，并针对不足之处提出了改进意见，为车架的进一步分析提供依据。
According to finite element analysis, calculation and modification, the results show that our optimized parameter setup works better than those traditionary ones without optimizing.
通过计算校核和有限元分析，证明该优化设计得出的参数方案比传统设计得出的参数方案更加合理。
Based on fracture mechanics and finite element theory, calculation and analysis stress intensity factor of fiber asphalt chip seal under different conditions.
基于断裂力学和有限元原理，计算分析了纤维沥青碎石封层路面结构在不同条件下的应力强度因子。
The linear fields of moment and displacement are used in the finite element analysis. The results of calculation show that the method proposed is simple and reliable.
在有限元分析中采用了线性的力矩场和挠度场，实际计算表明，本文使用的方法是简单、可靠的。
In this paper, APDL parameters of design and Finite Element Analysis of star gear are taken for example to research on the design, calculation and construction of the Mechanical model.
以APDL对星轮的参数化设计与有限元分析为例，先对行星齿轮力学模型进行建模，并对参数化设计计算进行研究。
The mechanics calculation and analysis are conducted to the original design and improvement plans with finite element software.
用有限元软件分别对原设计和改进方案进行了力学计算和分析。
The mechanics calculation and analysis are conducted to the original design and improvement plans with finite element software.
用有限元软件分别对原设计和改进方案进行了力学计算和分析。
应用推荐