The elliptical fin-tube is the cooling element of direct air cooler tubing.
椭圆翅片管是直接空冷器管束上的冷却元件。
This kind of fin is applicable to the fin-tube cooling heat exchanger and the effect of heat transfer is perfect.
证明该圆孔翅片是一种适用于翅片管式制冷换热器且传热效果优越的片型。
The start of defrosting of Air-cooled heat pump is usually controlled by the temperature of the surface of fin-tube exchanger.
风冷热泵通常采用测量翅片管表面温度来控制化霜。
The volumetric heat transfer capacity of plate cooler is 1.5 times as that of fin-tube cooler and 15 times as that of tube cooler.
板式空冷器单位体积换热量约是翅片管式空冷器的1.5倍，是光管式的15倍；
The experimental results are collected and compared on single experimental pipe, cross tube bundle, rectangle and triangle cross fin-tube.
对单根试验管、叉排管束、矩形截面超片管和三角形截面翅片管的试验结果进行了综合比较。
Under the laboratory conditions, a semi-industrial test was made to examine the thermotechnical characteristics of fin-tube type heat exchanger.
在实验室条件下，对片状管式换热器的热工特性进行了半工业性实验研究。
The quality requirement on hot-dipped galvanizing for elliptical fin-tube is analyzed, and the method to control the quality of hot-dipped galvanizing is put forward.
本文将针对椭圆翅片管的热浸锌质量要求进行分析，并阐述如何进行椭圆翅片管的热浸锌质量控制。
To find the basic heat transfer performance of fin-tube heat exchanger, the numerical analysis is carried for heat transfer element with single round and related fin area.
用数值方法分析了涡产生器式圆管管片式换热板芯单个圆管翅片区域内的传热与阻力性能。
The effects of the outdoor air temperature and humidity on the frosting characteristics of the fin-tube evaporator coils of an air source heat pump were investigated experimentally.
对一台空气源热泵空调器在不同环境条件下室外换热器的动态结霜性能进行了实验研究，分析了进风温、湿度对热泵空调器结霜量及霜层厚度的影响。
Fin electric heating tube heater: large thermal inertia, stable heating power, not blocking the air flow channel, wide heating range, long service life.
翅片电热管加热器：热惰性大、加热功率稳定、不堵塞空气流通通道、加温范围宽、使用寿命长。
The experimental results show that integral internal spiral fin tube is very effective for flow boiling heat transfer of freon dry evaporator.
试验结果表明，整体型内螺旋翅片管用于氟利昂干式蒸发器的流动沸腾传热是非常有效的。
Established the cooler fin tube production Division in the Utsunomiya Plant for expansion of production.
建立了较凉的翅片管的生产部门，在宇都宫厂为扩大生产。
It is device for guiding fin tube that is in fining process. It transfer welded fin tube to outside without machine stop.
此装置在翅片焊接过程中为翅片管的导出装置，即将焊接好后的翅片管传送出来，而机器不用停机。
This paper is an experimental report on heat transfer enhancement of freon-12 dry evaporator using integral internal spiral fin tube.
本文是一篇关于利用整体型内螺旋翅片管强化沸利昂12干式蒸发器传热的试验报告。
This paper studies the pin-fin tube, smooth tube and finned tube on the same wind channel test apparatus through experimental method.
采用实验研究的方法，分别对针翅管，平直翅片管和光管在同一风洞实验台上进行了实验。
There are fin cutting devices to produce serrated fin tube and cutting speed is controlled automatically depend on welding speed of tube dancer.
开齿机将翅片切开，可生产出锯齿形翅片管。剪切速度，根据辊子输送管子后焊接的速度自动控制。
The experimental results and mechanism of heat transfer enhancement of T—Shaped fin tube were discussed.
本文还讨论了试验结果及T形翅片管强化沸腾传热的机理。
HIMOD flagship series USES interactive "type v" coil, the internal thread copper tube and punched slotted fin, and heat transfer efficiency is higher than the traditional coil unit.
HIMOD系列旗舰型采用了交互“V型”盘管，采用了带内螺纹的铜管及冲缝型翅片，比采用传统式盘管的机组有更高的传热效率。
Professional R & D, welding fin tube, welding finned tube machine large equipment, quality assurance.
专业研发，焊翅片管、焊翅片管机床大型设备，质量有保证。
The air cooler is designed of nullity fin oval stainless steel bellows tube bank replacing conventional fin tube bank. It is a technological innovation designing and manufacturing of The air cooler.
空气冷却器采用无翅片椭圆不锈钢波纹管管束替代传统的翅片管管束，是空气冷却器设计制造的技术革新。
The electric hot air curtain machine can be divided into two types of semiconductor thermal sensitive ceramic heater and a fin electric heating tube heater according to different heating materials.
电热风幕机根据加热材料不同可分为半导体热敏陶瓷加热器和翅片电热管加热器两种。
Within the range of experiment, increasing fin height or decreasing spacing of fins of petal-shaped fin tube is helpful to improve the performance of heat transfer enhancement.
在实验范围内，花瓣管翅片高度的增加、翅间距的减少都有利于传热强化性能的提高。
A general steady distributed parameters model of fin-and-tube heat exchanger with complex refrigerant circuits was developed based on two-phase fluid network.
基于两相流体网络，建立了针对具有复杂流路布置的翅片管换热器稳态通用分布参数仿真模型。
The wavy fin-and-tube heat exchanger is one of th.
波纹翅片管换热器是应用最为广泛的翅片管换热器之一。
Spirally corrugated and sawtooth-shaped fin tube is a high performance condensation heat transfer tube.
螺旋槽锯齿翅片管是一种新型高效冷凝换热管。
Emphasis is laid on the effect of tube distance and fin thickness on fin efficiency.
重点分析了圆管与扁管管间距、肋片厚度对肋效率的影响。
Based on a comparison with a tube and fin radiator, this paper discusses and analyses the repairability and maintainability of a tube and corrugated fin radiator installed on Dong Feng EQ140-1 truck.
通过与管片式散热器总成的对比，分析、探讨了东风牌EQ140-1型汽车上所采用的管带式散热器总成的各项维修性能。
Based on a comparison with a tube and fin radiator, this paper discusses and analyses the repairability and maintainability of a tube and corrugated fin radiator installed on Dong Feng EQ140-1 truck.
通过与管片式散热器总成的对比，分析、探讨了东风牌EQ140-1型汽车上所采用的管带式散热器总成的各项维修性能。
应用推荐