And the filling speed focuses on medium and low levels.
而且灌装速度集中在中、低速两个层次。
Mold filling speed of iron casting in lost foam casting was experimentally measured.
通过试验测试了铸铁件消失模铸造的充型速度。
An empiric formula for the calculation of filling speed was established through multiple re...
通过多元线性回归，得出了计算充型速度的经验公式，并对公式进行了实验验证。
After the system implementation, oil filling speed and product conformity is remarkably increased.
采用该系统后，注油速度和产品合格率得到显著提高。
The filling speed is controlled properly to gain the ideal filling condition and the satisfactory box-parts.
指出了可通过控制填充速度，使有封闭前沿的断续液流不再形成而获得满意的盒形零件。
The result shows: different runner size and filling speed will result in different filled states and characteristics.
结果表明：采用不同的浇口尺寸及充型速度，所得到的液流充型状态和特性各不相同。
The process of clamping and self-locking clip of seed-filling has been studied, and built a model on the seed-filling speed.
研究了夹持自锁取种机构的充种过程，建立了充种速度模型；
The mechanism of filling accuracy and filling speed of gravity gravimetric filling machine were studied from the machine feeding material aspect.
本文根据食用碘盐物料特性和现有食用碘盐重力称重式充填机的不足 ，提出了提高充填机精度与速度的方法。
An empiric formula for the calculation of filling speed was established through multiple regression. And the formula was tested through experiments.
通过多元线性回归，给出了充型速度的经验计算公式，并对公式进行了验证。
The filling speed of lost foam cast iron casting was measured by use of an integrated set of experimental equipment and a specially designed computer acquisition system.
研究了负压度、模样密度、浇注温度、金属静压头等工艺因素对消失模铸铁件充型速度的影响规律。
The production line has reached advanced domestic level on key technical indicators including filling speed, load precision, the degree of automation, control, purification production target.
该生产线在灌装速度、装量精度、自动化程度、自动控制能力、净化生产目标等关键技术指标上都达到国内先进水平。
The Pre-filled syringe filling & stoppering machines are available in many types such as low speed, high speed, vacuum, non-vacuum, etc.
公司生产的预充式注射器灌装加塞设备涵盖了低速、高速，真空与非真空诸多品种。
Earth filling behind the abutment of high-speed railway is different from conventional railway in the selection of padding, construction control and quality supervision.
高速铁路桥台台后填土从填料选择、施工控制、质量监测等方面均不同于常规铁路。
Filling deviation depends on filling amount, filling rate and the switching speed of the upper and lower valves.
灌装误差的产生，主要由灌装量、灌装速度、上下阀门的开关速度来确定。
It is allowed to adjust the turret speed, depth of filling material and tablet thickness during pressing.
压片时转盘的速度，物料的充填深度、压片厚度均可调节。
Without opening mould, it can provide accurate buffer, high speed gap filling and high strength of supporting and positioning for different volume, switch and weight products.
无需开模，即可为不同体积、开关和重量的产品，提供精确的缓冲、高速空隙填充或者高强度的支撑定位。
Turntable can be installed 33 to pay die, spin a week can be suppressed 66, the pressure of films turntable speed, the depth of filling materials, the pressure thickness can be adjusted.
转盘上可装33付冲模，旋转一周可压制66片，压片时转盘的速度，物料的充填深度、压片厚度均可调节。
The dynamic strength and accumulated deformation characteristics of subgrade filling are one of the most important factors affecting the normal operation of high speed railways.
高速铁路路基填料的动强度和累积变形特性是保证高速铁路正常运营的重要因素之一。
Die casting, the influence factors of filling liquid alloy shape many, including injection pressure, the main injection speed, the fill time and mould temperature, etc.
压铸时，影响合金液充填成型的因素很多，其中主要有压射压力、压射速度、充填时间和模具温度等。
Rotary speed and pressure for depth of the filling material and thickness of the tablets can be adjusted, still can choose piece look samples.
压片时转盘的速度、物料的充填深度、压片厚度均可调节，还可以选取片看样。
The height computation model of fluidize-bed showed that the bed height is mainly influenced by catalyst filling amount, linear speed of reaction gas and particle size of catalyst.
流化床高度计算模型表明，床层高度主要受催化剂装填量、反应气体线速和催化剂粒度的影响。
Computing speed of numerical simulation on filling process of casting is a focus and difficulty in the study of this field.
提高充型过程数值模拟的计算速度是流场模拟的一个研究热点。
The algorithm simple principle, not from the relatively complex operation, high speed, and a simple point of judgement guarantee the accuracy of the filling.
该算法原理简单，而不是从相对复杂的操作，速度快，简单的判别点，保证了灌装精度。
The effects of the high speed compounding and forming technology on properties of high filling floor tile base sheet are studied.
主要研究了高速配混料和成型工艺对高填充地砖基片性能的影响，并相应地提出了配方和工艺控制参数。
The speed E peak of left ventricular early-diastolic fast filling decreased, but the speed A peak of loft ventricular late-diastolic filling complemently increased.
左室舒张早期快速充盈值速度E峰降低，舒张晚期充盈速度A 峰代偿性增高。
The results show that the greater casting thickness, rotating speed and radius of centrifugal casting are, the greater the filling ratio are.
试验结果表明，试样铸件厚度越大，离心半径越大，离心转速越高，铸件型壳的充填率越高。
High-speed tube filling and sealing machine, sticker screw cap machine, cartoning machine, warehousing logistics equipment and relevant form a complete set of production line of high-tech enterprises.
高速软管灌装封尾机、贴膜拧帽机、装盒机、仓储物流设备及相应配套生产线的高科技企业。
Improving roadbed filling has become a critical problem to be solved in respect of high-speed railways since high-speed dedicated passenger lines have strict requirements to roadbed deformation.
基于高速客运专线对路基变形的严格要求，路基填料改良已成为高速铁路必须解决的问题。
This paper studies the filling type characteristics of the metal liquid flow in squeeze casting, and employs high-speed photography to examine the filled state of melting body.
研究了挤压铸造中金属液流的充型特性，利用高速摄影观察溶体的充填状态。
Electric Bicolor Toothpaste filling Machine adopts stepless speed regulation. Every color has five strips and the filling volume of two colors is adjustable.
电动双色牙膏灌装机，该机采用无级调速，每分钟颜色各分为五条，两种颜色灌装量任意可调。
应用推荐