Bacteria housed on a graphite fiber anode break down the fats, proteins and sugars in sewage, freeing up a steady stream of electrons, which the bacteria transfer directly into the electrode.
细菌被安置在石墨纤维制成的阳极上，分解污水中的脂肪、蛋白质和糖类，此过程中产生的稳定的电子流将被直接输入电极。
On the basis of the transfer matrix theory, the authors have studied the transmission properties of the sampled chirped fiber grating.
运用传输矩阵理论，对取样啁啾光纤光栅的传输特性进行了模拟研究。
The more attention was paid for the effects of matrix, interface and fiber orientation on stress transfer and stress distribution in composite.
研究中主要讨论了基体、纤维和界面的力学性能以及纤维位向的变化对应力传递和应力分布的影响。
The stress transfer at the interface requires an efficient coupling between fiber and matrix.
界面上的应力传递要求纤维与基体之间具有有效地偶联。
Based on the coupled-mode theory, the transfer-matrix method is used to calculate the transmission spectra of phase-shifted long-period fiber gratings (LPFG).
应用耦合模理论和传输矩阵法计算模拟了长周期光纤光栅的透射谱，并对其进行了切趾优化。
The composite skirts for solid rocket motor shells fabricated by VARTM (VacuumAssisted Resin Transfer Molding) had poor mechanical properties because the fiber volume fraction was very small.
VARTM工艺成型的固体火箭发动机壳体复合材料连接裙段构件纤维体积含量较低，复合材料力学性能不佳。
The solidification model of fiber reinforced binary aluminum alloy was established according to the conservation law and the transfer principle of alloy solidification.
根据合金凝固过程中的守恒定律和传输原理，建立了纤维增强二元铝合金的凝固模型。
In dealing with the cracking of steel fiber concrete element, the stress release factor and shear transfer coefficient are introduced.
在钢纤维混凝土单元开裂处理中，引入应力释放因子和剪力传递因子。
Reflective spectral properties of sampled fiber Bragg grating is theoretically calculated by transfer matrix method.
用传输矩阵法从理论上计算了取样光纤布拉格光栅的反射谱特性。
The traditional shear lag theory of stress transfer in short fiber reinforced metal matrix composites was modified and improved.
对短纤维增强金属基复合材料应力传递的传统剪滞理论进行了修正和改进。
Mechanical propertys of fiber composites largely depend on stress transfer of fiber and matrix.
纤维复合材料的力学特性很大程度上依赖于纤维和基体的应力传递。
Rotation of the fiber bundle increases the relative velocity between the fluid and the hollow fibers and increases the mass transfer.
该纤维束的旋转增加了所述流体与所述中空纤维之间的相对速度，并且提高了所述物质传递。
The next, the influence of phase match between input signal and line-array fiber-optic image bundles on the contrast transfer function was analysed digitally.
其次，采用数值计算的方式，分析了输入方波信号与光纤束位相匹配对对比度调制传递函数的影响。
The power margin of the optical fiber relay system is determined from the loss transfer function.
利用损耗传递参量确定中继系统功率容限；
Using fiber channel to achieve the distant data transfer is the best transmit technology in smart grid.
利用光纤通道实现远方信号传输，是适用于智能电网的最佳传输机制。
Resin transfer molding(RTM) is one of the important processes for fabrication of fiber-reinforced polymer-matrix composites.
树脂传递模塑工艺（RTM）是纤维增强聚合物基复合材料的重要制备工艺之一。
Using finite element method, the stress transfer in a matrix cracked fiber reinforced composite is studied.
本文用有限元法研究了具有基体裂纹的纤维增强复合材料内的应力传递问题。
This paper describes the technology of the carbon fiber antenna metalizing by transfer.
介绍了碳纤维复合材料天线采用转移法进行表面金属化的技术。
The result shows that the innovation mentioned above can improve the contrast transfer characteristics of fiber image inverters.
通过以上改进，可改善光纤倒像器的对比度传递特性。
It is shown that absorption coefficient and clad radius of fiber, heat transfer coefficient and pumping method can affect temperature distribution.
分析结果表明，光纤的包层半径、传热系数以及抽运方式对光纤中的温度分布有很大的影响。
The fiber gas detection technology carry the signal by the light and transfer signal by the fiber, so it is a high sensitivity gas detection technique.
光纤气体检测技术是一种以光信号为载体、以光纤为信号传输通道的高灵敏度的气体检测技术。
Due the low fiber volume fraction of the composite skirt fabricated by vacuum-assisted resin transfer molding (VARTM), bladder-assisted RTM is suggested.
针对某型号上用VARTM工艺制造的复合裙纤维体积含量偏低的缺点，提出用气囊辅助rtm工艺制造该复合裙。
The circuit types approaching the realization of the optimal transfer function of the receiver in low- and high-dispersion digital fiber-optic communication systems are given.
给出了在小色散和大色散光纤通信系统中近似实现光接收机最佳传递函数的电路型式；
A method is proposed for the approximation and realization of the optimal transfer function of the receivers in full-response digital fiber-optic communication systems.
本文提出了全响应数字光纤通信接收机最佳传递函数的逼近和实现方法；
The side-coupling technology for double-clad fiber can transfer pumping light into inner cladding through the side of the fiber.
双包层光纤侧面耦合技术将泵浦光从光纤侧面耦合进入内包层，与端面耦合技术相比，更有利于高功率光纤激光器的实现。
By making study on the characteristics of mass transfer efficiency-head loss of fiber bundle media, the technical parameters were determined for the fiber bundle filter.
从研究纤维束滤料的传质效率—水头损失特性出发，确定了纤维束过滤器的技术参数。
By experiments, it analysed the influence of cross sections of profile fiber on the properties of moisture-transfer and dry-fast.
通过试验，分析了异形纤维的截面形状对织物导湿快干性能的影响。
The principle was presented of the liquid films formed with the new two phase down flow medium on the fiber silk and realizing the mass transfer of film surface contact.
介绍了一种新型两相顺流介质在纤维丝上形成液膜，实现膜面接触传质的原理。
Simplified analysis on a single fiber fin in the duct flow demonstrates that the heat transfer can be enhanced with the increasing length-to-diameter ratio and thermal conductivity ratio.
对单根纤毛肋进行的简化理论分析表明纤毛长径比和肋材与流体的导热系数比越大其强化换热作用越好。
Simplified analysis on a single fiber fin in the duct flow demonstrates that the heat transfer can be enhanced with the increasing length-to-diameter ratio and thermal conductivity ratio.
对单根纤毛肋进行的简化理论分析表明纤毛长径比和肋材与流体的导热系数比越大其强化换热作用越好。
应用推荐