The correlation between voltage and fiber properties are examined.
探讨了静电纺丝时电压和纤维性能之间的关系。
The impact of cylindrical refiner and disc refiner on long fiber and short fiber properties were compared.
比较了圆柱磨与盘磨对长纤维和短纤维打浆性能的影响。
The surface treatment of glass fibers is an important approach to improve glass fiber properties and expand applications.
对玻璃纤维进行表面处理是提高玻璃纤维性能，拓展应用领域的一种重要技术途径。
The results showed that the soybean protein fiber properties modified by sericin and cationic agent were improved greatly.
结果表明，用丝胶和阳离子交联剂对大豆蛋白纤维改性，织物的性能明显改善。
This paper reports the fiber properties produced new spinning technology and compares the characteristics of standard fiber with new fiber.
介绍了新的纺丝工艺生产的纤维的加工性能，并对常规纤维和新型纤维的特征进行了比较。
The forming yarn structures depend on their spinning methods and the yarn structures and their fiber properties determine the yarn properties.
纺纱方法决定着成纱结构，成纱结构与纱线组成原料又决定了纱线的性能。
The new method of dowtherm supplement in spin beam was discussed, during the spinning without lowing temperature of spin beam and fiber properties.
探索在纺丝箱不降温、正常纺丝、工业丝物性不受影响的情况下，对纺丝箱补加联苯的新方法。
This flexibility in designing fiber properties gives this new technology the potential for wide-scale use in future textile and technical applications.
这种设计纤维的灵活性在未来纺织和产业用途中使这项新技术有大规模应用的潜力。
The yarn properties not only depend on the their fiber properties but on the yarn structures. The yarn structure can be described by the fiber geometric arrangement.
纱线的性能不仅取决于组成纤维的性能，还取决于纱线的结构，纱线的结构可以通过纤维的几何排列来描述。
The results show that spinning and fiber properties are influenced by the concentration of the solvent in the coagulating bath and the temperature of the coagulating bath.
结果表明：凝固浴中溶剂浓度对纺丝过程及纤维强度有重要影响，而凝固浴温度对纤维的影响相对较小；
The influences of viscosity, spinning temperature, quenching air, after drawing ratio, crimp, shrink setting of two components on fiber properties were discussed in detail.
讨论了两种切片的特性粘数、纺丝温度、侧吹风、后拉伸倍数、松弛定型等工艺对纤维性能的影响。
The properties of fine denier polyester fiber and viscose fiber are introduced, and some factors affecting the yarn quality such as fiber properties and spinning process are analyzed.
介绍了圣麻纤维和细旦涤纶纤维的性能特点，通过工艺试验，分析了纤维性能、纺纱工艺等影响纱线质量的一些因素，探讨了提高成纱质量所采取的有效技术措施。
The properties of fine denier polyester fiber and viscose fiber are introduced, and some factors affecting the yarn quality such as fiber properties and spinning process are analyzed.
针对纯细旦涤纶短纤纱和喷气织造工艺特点 ，合理制定了纯细旦涤纶短纤维经纱的上浆工艺 ，并取得了较好的织造效果。
The fiber properties of silk noil are test and analyzed. According its fiber properties, the key process technologies of silk noil yarn production on cotton equipments are put forward.
对绢纺落绵的纤维性能进行了测试与分析，针对其纤维特点，提出了在棉纺设备上生产绢纺落绵纱的工艺要点。
The comparison between properties of jute fiber reinforced polypropylene composite and ramie ones is made to study the influence of different fiber properties in reinforced composites.
最后，比较了苎麻纤维增强聚丙烯与黄麻纤维增强聚丙烯的性能以研究不同纤维对增强聚丙烯的影响。
The fiber properties, the yarn structures and properties, the fabric structures and properties interact, as the results the heat and moisture permeability of the fabrics show great differences.
在研究织物热湿传递时，影响热湿传递的因素比较复杂，包括纤维种类与性能、纱线结构与性能、以及织物的结构与性能等。
Strano's team built, for the first time, a fiber made of two layers of nanotubes with different electrical properties — specifically, different bandgaps.
斯特拉诺小组首次在光伏组件中植入了两层具有不同电特性的纳米管结构的纤维——这些纤维具有不同的特性和禁带结构。
The microstructure and properties of the pavement asphalt reinforced by polyester engineering fiber were investigated.
研究了两种聚酯工程纤维改性道路沥青的微观结构与性能。
The formulation, the technological conditions and the product properties of polyurethane materials for low density long fiber injection (LFI) process were studied.
对低密度长玻璃纤维注射工艺(LFI)用聚氨酯材料的配方、工艺条件和制品性能进行了研究。
It is also the fiber chemical properties is very stable, but also has strong acid resistance and alkali resistance properties in the process of operation.
它的纤维化学性能也是非常稳定的，而且在操作的过程中具有较强的耐酸性能以及耐碱的性能。
The test results showed that adding virgin PP fiber could improve molding performance of the composite, but made the physical mechanical properties reduced.
试验结果表明，添加聚丙烯纤维有助于改善材料的模压性能，但导致材料物理力学性能下降。
This paper talked about the effects of fiber length, coarseness and strength on the properties of paper, which include tensile strength, tearing strength, burst strength and formation.
讨论了纤维的长度、粗度和纤维的内在强度对纸页的抗张强度、撕裂度和耐破度以及纸页成形性能的影响。
On the basis of the transfer matrix theory, the authors have studied the transmission properties of the sampled chirped fiber grating.
运用传输矩阵理论，对取样啁啾光纤光栅的传输特性进行了模拟研究。
We design a THz photonic crystal fiber and a THz porous fiber and investigate the evanescent wave sensing properties of the two THz waveguide.
设计了一种太赫兹波光子晶体光纤结构和太赫兹波多孔光纤结构，研究了两种太赫兹波导倏逝波传感的特性。
Indicate the properties and structure of knit-lines for fiber reinforced plastics.
并简叙了玻纤增强塑料熔合缝的结构和性能。
It emphasized on the conductive mechanism, properties and its influencing factors of carbon fiber concrete.
重点讨论了碳纤维混凝土的导电机理、性能及其影响因素。
Photonic crystal fiber offer several unique properties.
光子晶体光纤有一些独特的性能。
Through the experiment contrasts, the compressed properties of reinforced concrete columns wrapped with glass and carbon fiber reinforced polymers are analysed.
通过实验对比，分析了玻璃纤维布加固柱和碳纤维布加固柱的受压性能。
This paper mainly focused on the effects of carboxymethyl cellulose (CMC) addition during bamboo pulp beating on its fiber and paper properties.
研究了羧甲基纤维素钠(CMC)作为打浆助剂在打浆过程中对竹子纤维特性及成纸性能的影响。
This paper mainly focused on the effects of carboxymethyl cellulose (CMC) addition during bamboo pulp beating on its fiber and paper properties.
研究了羧甲基纤维素钠(CMC)作为打浆助剂在打浆过程中对竹子纤维特性及成纸性能的影响。
应用推荐