Finally the possibility of achieving tricolor by fiber laser is discussed.
最后探讨了光纤激光器实现三基色的可能性。
A simplified theoretical model of double-cladding fiber laser is presented.
提出了双包层光纤激光器简化的理论模型。
End pumping coupling is commonly used in coupling of high power fiber laser.
端面抽运耦合是高功率光纤激光器的常用耦合方式之一。
The results lay a foundation to achieve coherent combining of fiber laser array.
该工作为实现光纤激光器阵列的相干合成打下实验基础。
At last, The trial of mine sweeping by using kilowatt class fiber laser was presented.
最后介绍了利用所研制的千瓦级大功率光纤激光器进行扫雷的试验。
This method suits for pumping the fiber laser and amplifier of several watts output power.
该方法适用于输出功率为数瓦的光纤激光器和放大器的侧面抽运。
A novel all fiber discrete tunable distributed back reflector (DBR) fiber laser is reported.
报道了一种新型全光纤离散可调谐分布反射(DBR)光纤激光器。
The optimization of threshold pump power of the double-clad cw fiber laser has been discussed.
对连续运行时双包层光纤激光器阈值的优化问题进行了分析。
The experimental result of fiber laser based on the few-mode fiber Bragg grating is presented.
同时对在多种双包层光纤写制多种光纤光栅进行了实验研究，并进行了分析。
The paper summarizes the nonlinearity and heat effect in double-clad fiber laser with high power.
文章综述了大功率情况下双包层光纤激光器中的非线性和热效应。
Stimulated Raman scattering is one of the main restriction for the improvement of high power fiber laser.
受激拉曼散射是大功率光纤激光器性能提升的主要限制之一。
Using the way of homodyne coherent detection, a fiber laser Doppler vibrometer is designed and completed.
采用零差的相干探测方式，设计并实现了一套光纤结构的激光多普勒振动计。
Vector soliton bunches are obtained experimentally in nonlinear polarization rotation mode-locked fiber laser.
在非线性偏振旋转锁模光纤激光器中获得了矢量孤子簇。
Under certain conditions, this method can measure the output linewidth of single longitudinal mode fiber laser.
在一定的条件下，该方法是可以对单纵模光纤激光器的输出线宽进行测量的。
The configuration of the interference type fiber laser array is novelty and is easy to carry out array combining.
耦合式光纤激光器阵列结构新颖，是一种较容易实现阵列耦合输出的结构。
Coherent beam combination of fiber laser array is an important technology in realizing high power fiber laser system.
光纤激光相干合成技术是实现高功率、高亮度光纤激光系统的重要技术途径。
The experiments of cutting stainless steel gear wheel with fiber laser precision processing system, were carried out.
利用光纤激光精密加工系统进行了不锈钢齿轮的切割实验。
Using the fiber laser as light source, Stable performance, High photoelectric conversion efficiency, Low energy consumption.
采用光纤激光器作为光源，性能稳定，光电转换效率高，能耗低。
Double cladding fiber laser is the one that outputs maximum power currently, whose output power can approach to hundreds watt.
双包层光纤激光器是目前研制出的功率最大的光纤激光器，它的激光输出功率可达几百瓦。
The operation principle of this helical-core fiber laser and its latest theoretical and experimental development are specified.
介绍了这种螺旋芯光纤的原理和其提高输出功率的能力，以及目前的理论与实验研究现状。
We have worked on length vary of gain medium's influence on output performance of a DBR fiber laser utilizing high-doped erbium.
考察了高掺铒光纤作为增益介质的DBR型光纤激光器各项性能随光纤长度变化的情况。
Obviously, the incoherent fiber laser beam combination method is the ideal choice to realize airborne soft-killing laser source.
显然，非相干组束方法是实现机载软杀伤激光光源的理想选择。
The technologies of high-power fiber laser are summarized, and a CW fiber laser with output power of 6.02W was demonstrated experimentally.
概述了高功率光纤激光器的关键技术，并介绍了通过实验使光纤激光器获得最大输出功率6.02W。
Due to the flexible beam guidance of the fiber laser, robot, scanner and fiber laser are forming a perfect team for those application tasks.
由于光纤激光器灵活的光束导向，机器人、振镜系统以及光纤激光器本身构成了一个完美的整体，以完成上述的应用任务。
Ytterbium doped double clad fiber is the critical component of the fiber laser, and it is one of the most important branches of rare-earth doped fibers.
双包层掺镱光纤是制作大功率光纤激光器的关键部件，是稀土掺杂光纤中最重要的分支之一。
This text summarily introduced the research background of the fiber laser first, including characteristics, main category, application, development etc.
本文首先概要介绍了光纤激光器的研究背景，包括光纤激光器的特点、主要种类、应用、发展前景等。
The analysis has proved that fiber laser through coherent beam combination must be necessary for the future airborne soft killing high power laser source.
分析表明相干组束光纤激光器是未来机载软杀伤高功率光源的必然选择。
The double-clad fiber laser has the advantages of simple structure and high reliability, high output power, high conversion efficiency, high beam quality.
它具有结构简单紧凑、输出功率高、稳定可靠、光电转换效率高、光束质量好等优点。
This article presents a new design structure of variable bandwidth phase-locked loop based on improving phase-locked loop of actively mode-locked fiber laser.
对主动锁模光纤激光器的锁相环进行改进，提出一种新型的“变带宽锁相环”的设计结构。
To study the relationship, the output capability of multimode fiber laser is measured under various bending diameters, and it also be calculated theoretically.
为研究两者之间的关系，在光纤不同弯曲直径下，对多模光纤激光器的输出性能进行了实验测量和理论计算。
应用推荐