The influence of various glass fiber interface treatment agent, glass fiber reinforced PVC, hybrid composition and hybrid condition on mechanical property and microstructure is studied in this paper.
本文主要研究了玻纤的不同表面处理剂、玻纤增强聚氯乙烯共混物组成及共混条件对共混物的力学性能及微观形态结构的影响。
With Fiber, developers start by creating an application model from which they go on to develop the Flex user interface and the server business logic.
借助于Fiber，开发者首先创建好应用模型，然后以此为基础开发Flex用户界面以及服务器端业务逻辑。
The interface used in the Fog class UTP, coaxial cable, microwave or fiber to achieve.
该接口在雾里上课采用双绞线、同轴电缆、微波或光纤来实现。
Fiber optic , transceiver , interface converter.
光纤，受罚器，接口转换器。
It becomes clear, then, that adhesion of the fiber and the matrix at the composite interface is fundamental to the failure of the composite.
这样，显然，复合材料界面上的纤维与基体的粘接是复合材料失效的基础。
It was found that the C-scan image of a ply interface contained mostly the fiber orientation information of the two neighboring plies, with that of the upper ply often showing more prominently.
发现铺层界面的C扫描图大都包含两相邻铺层的纤维方向信息，而上铺层的信息显示更明显。
The more attention was paid for the effects of matrix, interface and fiber orientation on stress transfer and stress distribution in composite.
研究中主要讨论了基体、纤维和界面的力学性能以及纤维位向的变化对应力传递和应力分布的影响。
The effect of silane and titanate coupling agents on the interface bonding state and the mechanical properties of GRPFN (Glass Fiber Reinforced PF Nylon)has been studied.
研究了几种硅烷偶联剂、酞酸酯偶联剂对玻纤增强PF尼龙界面粘结状态和力学性能的影响。
The stress transfer at the interface requires an efficient coupling between fiber and matrix.
界面上的应力传递要求纤维与基体之间具有有效地偶联。
In this paper, an overview of the formation, determination and various theoretical analysis methods of residual stress at the fiber - polymer interface is presented.
本文综述了聚合物基纤维复合材料界面残余应力的形成、测定方法和各种理论分析方法。
The effects of matrix structure and interface situation on properties of plant fiber cement-based composite materials with steel slag were studied.
针对含有钢渣的植物纤维增强水泥基复合材料，研究了其基体结构和界面状况对材料性能的影响。
It was concluded that the interlaminar tensile strength of the composite is dominated by the bonding strength of the interface between fiber and matrix, not by lay-up orientation.
结果表明：该复合材料层间拉伸强度较少受到铺层取向的影响，而由纤维与基体的界面结合强度所控制。
The results show that after being treated with coupling agent, interface interaction between inorganic fillers or asbestos fiber and epoxy resin enhances quite a little.
采用硅烷偶联剂对无机填料和石棉纤维进行表面处理，提高无机填料与聚合物基体的界面相互作用；
The mechanism of CSW modifying paving asphalt was analyzed and discussed based on the mechanism of fiber treating asphalt, solubility theory, colloid and interface theory, etc.
结合纤维改性沥青机理、溶解度理论、胶体理论以及界面层理论等对硫酸钙晶须改性沥青机理进行分析探讨。
In a composite system, the adhesion at the interface between fiber and matrix plays an important role in improving the resulting mechanical behavior.
良好的界面粘结是制备高性能复合材料的关键之一，而树脂与纤维的优良浸润则是其首要前提。
The results show that the interfacial adhesion strength increased noticeably for composites of active aramid fiber but the fracture energy of the interface decreased.
实验结果证明，芳纶表面改性显著提高了其复合材料界面的粘结强度，相反却降低了其界面断裂能。
Fiber reinforced aluminum alloy composites are manufactured by squeeze casting. Segregation at interface of the composites is studied.
利用挤压铸造制备了纤维增强铝合金复合材料，研究了复合材料的界面偏析。
Also the microstructures at the interface of fiber and matrix were observed and analyzed through TEM.
用透射电子显微镜观察分析了增强体与基体合金界面的微观组织结构。
That storing the information of fiber positioning unit in the computer is the base not only for units examination and controlling, but also for the data interface of all system transportation.
对光纤定位单元的性能实验和自动控制都要求将单元的相关信息存储于计算机，而且系统间光纤定位单元信息的相互传递也需要统一约定的接口。
The results indicate that there is a coupled interface between alumina fiber and Si phase, and the fiber can serve as propitious sites for the heterogenous nucleation of Si phase.
结果表明氧化铝纤维与硅相之间存在共格界面，可作为硅相非自发形核的衬底；
The Si—OH bond, impurity and phase interface are the important factors for the crystallization temperature of the quartz fiber to be lower than that of the quartz glass.
OH键、杂质以及界面等因素是石英纤维析晶温度低于石英玻璃的主要原因。
An interface formed by joining the ends of two optical fibers in a coaxial (in-line) butt joint for direct fiber-to-fiber transmission.
为使光纤对光纤直接传输，将两根光纤的端面以同轴对接方式进行连接所形成的一种界面。
It is concluded that the interface adhesive performance of fiber has been improved and the infiltration performance with water is increased in the condition of no mechanical properties lost.
结论得出，在力学性能几乎无损伤的情况下，纤维与树脂的界面性能明显改善，与水的浸润性明显提高。
The paper illustrates the characteristics of hollow optical fiber in detail and uses the concept of evanescent wave to explain the beam transmission in interface of hollow and core.
对空心光纤的结构特点做了细致的分析，采用迅衰波场的概念来解释空心光纤纤芯与空心处的传光损耗。
The influence of carbon fiber surface grafting polymerization on the interface of polymer composite is also discussed.
探讨了接枝聚合物层对复合材料界面的影响。
The roles of interface between tile fiber and the matrix in fiber reinforced metal matrix composites are studied during wear according to the structural features of the composites.
根据纤维增强金属基复合材料的结构特点，研究了界面在复合材料磨损过程中的作用。
Regarding the design method, pseudo strain hardening model, pseudo strain hardening performance indices and how to choose fiber, matrix and interface for UHTCC are introduced.
在设计方法方面，准应变硬化模型，准应变硬化性能指标和如何选择纤维，基体和界面UHTCC的介绍。
In this paper an overview of the formation, determination and various theoretical analysis methods of residual stress on the fiber-polymer interface is presented.
本文综述了聚合物基纤维复合材料界面残余热应力的形成、测定方法和各种理论分析方法。
Sensing of disengaging at interface of steel tube-confined concrete, which now can be realized by distributed optical fiber sensing, is important for structure safety.
通过分布式光纤传感技术可以实现对钢管混凝土界面脱空的检测，这对于这种组合结构的安全检测来说具有重要意义。
The V5 interface optical fiber subscriber system is reported in this paper.
报告了研制成功的V5接口光纤用户接入系统。
应用推荐