The butted loss has been calculated when the distance between the fiber end and the mirror is L.
在此基础上讨论了光纤端面相距反射镜为L时的耦合损耗。
By means of optical grinding and cutting optical fiber end face, it can access clean fiber end face.
通过光学研磨、端面切割等手段对光纤端面进行加工，获得平整光洁的光纤端面。
Under the paraxial approximation, the optical transformation matrix of the upside down taper lens fiber end is given.
在近轴近似下，给出了这种光纤端的光学传递矩阵。
Using high vacuum magnetron sputtering system, it is coated sensitive film on the optical fiber end face, silicon, glass.
并采用高真空磁控溅射镀膜技术将敏感膜溅射在光纤端面、硅片、有机玻璃上。
The output optical field distribution function of the fiber end is ussd to analyze the compensation mechanism of this sensor.
借助于纤端出射光场的光通量分布函数，分析了该传感器的补偿机理。
For this new type fiber end, the ray refraction formula at a spherical surface and the ray trace equation are used to analyze ray transformation properties.
借助于光纤在球面上的折射公式及光线传输方程，分析了这种新型单模光纤端的光学传递性质。
The alignment of laser beam to fiber end face and degradation of beam quality can increase the coupling losses. This paper analyzes their effects to the coupling efficiency.
激光与光纤的机械对准误差和光束质量下降导致了耦合损失，本文分析了它们对耦合效率的影响。
With planar array CCD sensor, exit spot from optic fiber end is detected through extracting the characteristic points of spot for characterizing the position of optic fiber.
以面阵CCD为传感器，检测光纤端部出射光斑，采用“重心法”提取光斑的特征点表征光纤的位置。
The influence of inclination of the fiber end surface to coupling energy of a pyrometer and variation of the accepting Angle of the fiber caused by the inclination is calculated.
分析了光纤端面倾斜对光能量耦合的影响和光纤接收角的变化。
The study on high quality surface formation mechanism in lapping of optical fiber end-face has become an important topic about improving performances of optical fiber connectors.
研究光纤端面研磨时高质量表面的形成机理已成为提高光纤连接器质量和制造效率的重要课题。
Detection of optic fiber end based on characteristic points, the experiments show that the system has a good stability and its repetition accuracy is as high as 0.7% of CCD pixel.
实验表明，基于特征点对光纤端部检测，重复精度达到0.7%的CCD像素，系统具有良好的稳定性。
A user flushes one end of a fiber-optic cable down his toilet; an hour later, it's recovered and connected to the Internet by a team of Plumbing Hardware Dispatchers.
用户冲走自己马桶下的光纤电缆的一端，一个小时后，它就能恢复并且通过水管硬件调度员的团队合作而连上互联网。
See you at the Restaurant at the End of the Fiber.
让我们在网络尽头的餐馆见。
A couple of high-end performance cars like the BMW M6 and Chevrolet Corvette have carbon fiber body panels, and the material is used for interior trim in the place of wood veneers or aluminum.
多款高性能汽车，如宝马M6和雪佛兰科尔维特（Chevrolet Corvette），车体外板均采用碳纤维材料。 不仅如此，它还取代了车内装饰用的薄木板和铝制材料，成为新的装饰材料。
Then, at the end, squeeze and flex your pecs, making sure to get every fiber involved in the movement.
然后，在最后的时候，挤压和弯曲胸肌，确保让每一根纤维都得到锻炼。
End pumping coupling is commonly used in coupling of high power fiber laser.
端面抽运耦合是高功率光纤激光器的常用耦合方式之一。
At the other end of the cell, a fiber known as an axon runs into the brain.
在另一端的细胞，纤维称为一个轴突运行到大脑。
The spatial resolution of system can be measured directly or evaluated indirectly by the half width of the Fresnel reflection at the end of the fiber.
系统的空间分辨率既可以直接测量，也可以通过测量光纤末端菲涅尔反射的半宽度来间接测量。
The self-consistent finite element method is used to evaluate longitudinal effective Young's modulus and shear modulus for unidirectional fiber composite containing the fiber-end crack.
计算了含有纤维端头裂纹的单向短纤维复合材料的有效纵向拉伸模量和纵向剪切模量，并分析了体分比、刚度比、长径比等物理、几何因素的影响。
Experiment results using single mode fiber as standard waveguide show that the average end-coupling loss is 0.
单模光纤作为标准波导的端面耦合自动调芯试验显示，平均耦合损耗分别为0。
The mode distributions at the end of a multi-mode fiber and a channel waveguide were successfully imaged by the system.
采用该系统成功地检测了多模光纤端面和一个条形光波导端面的模场分布。
Activated carbon fiber(ACF) was used to purified glutaric acid from the mixture of binary acids(DBA), and by recrystallization the end production glutaric acid was purified.
通过活性碳纤维（ACF）处理柱来分离混合二元酸（DBA）中有色物质，然后重结晶提纯分离戊二酸。
For short fiber, the output laser power and slope efficiency can be improved when a reflective mirror is set at output end to reflect the pump light.
当光纤长度较短时，在输出端放置反射镜使泵浦光高反射，可以提高输出功率和效率。
Not only side glowing optical fiber can transmit light from one end to another end, but also can leak out light from its clad surface to make the optical fiber glowing wholly.
它不仅能将光从光纤一端面传输至另一端面，而且还能将光从其包层表面泄漏出来，使光纤整体发光。
Besides the functions of carding and separating fiber tail end, top comb can also form added friction fields that strengthen the control of float fibers to decrease fiber damage effectively.
分析了顶梳除具有梳理分离纤维丛尾端的作用外，同时形成附加摩擦力界，加强对分离纤维丛中浮游纤维的控制，以减少有效纤维的损伤。
Besides the functions of carding and separating fiber tail end, top comb can also form added friction fields that strengthen the control of float fibers to decrease fiber damage effectively.
分析了顶梳除具有梳理分离纤维丛尾端的作用外，同时形成附加摩擦力界，加强对分离纤维丛中浮游纤维的控制，以减少有效纤维的损伤。
应用推荐