Benjamin (voiceover) : the feed cut, the last moment, I - I was in shock. What had just happened?
本杰明(旁白)：最后一刻，信号被切断了，我——我极度震惊。刚刚发生了什么？
To feed her little son, Mrs. Smith has to cut up the vegetables and meat.
为了给小儿子喂食，史密斯太太不得不把蔬菜和肉切碎。
The Mute Singer found some snails and cut them into small pieces and began to feed the frogs.
他发现了一些蜗牛，便将蜗牛切成小片喂青蛙。
"They're able to cut their feed costs because they're able to use manure," he fumes.
“他们能省饲料钱，都是因为使用粪肥，”他愤怒地说。
Also, many poor families have been forced to cut back on education costs in order to feed themselves.
另外，许多贫困家庭不得不削减教育费用，以满足他们的食品需求。
It comes after scientists found mixing some unusual foods into cattle and sheep feed could cut the stinky emissions from animals by as much as a quarter.
科学家发现，在牛羊饲料中加入一些不寻常的食物，可以将它们排放的废气减少四分之一。
Additionally, rainforests are being cut down at an extremely rapid rate to both pasture cows and grow soybeans to feed cows.
此外，雨林以极快的速度在被砍伐以建奶牛牧场和种植大豆喂养奶牛。
That means finding a way to feed all those pigs with grain imported from land cut from the Brazilian rainforest, leading to conflict within the BRICs.
这就意味需要设法进口饲养猪的谷物，因此就会需要砍伐巴西的热带雨林进行农场的建设，而这样的就导致了金砖四国之间的冲突。
'I've cut spending down to the bare minimum — no cell phone, no satellite TV, and 33 cents a day to feed the dog.'
‘我都把花费砍到最低限度了—没一分钱的电话费、没一分钱卫星电视费，每天花3角3分钱喂狗。’
To cut transportation costs and feed the market in the wintertime, more produce is grown in greenhouses.
为了降低运输成本和满足市场要求，在冬季植物大多的是生长在温室里的。
The conditions which have an important influence on metal cutting are work material, cutting tool material, cutting tool geometry, cutting speed, feed rate, depth of cut and cutting fluid used.
对金属切削有重要影响的条件有工件材料、刀具材料、刀具几何形状、切削速度、进给率、切削深度和所用的切削液。
Thee three factors of cutting include cutting speed, feed and the depth of cut.
切削用量三要素包括切削速度、进给量和（或叫吃刀量）。
Then they cut the wedding cake and feed each other a bite.
然后他们切开结婚蛋糕并互喂对方一口。
The selection of a suitable feed depends upon many factors, such as the required surface finish, the depth of cut, and the geometry of the tool used.
合适进给的选择取决于许多因素，例如所需表面光洁度、切削深度和所用刀具的几何形状。
May enter codes specifying speed, feed and cut of the tool path for computer numerical controlled (CNC) machine tools.
可以进入计算机数控(CNC)机床的切割者路径的指定速度，填补和切割代码。
During a facing operation, feed is provided by the cross slide, whereas the depth of cut is controlled by the carriage or compound rest.
在端面车削操作中，进给由横向滑板提供，而切削深度则通过大拖板或复式刀架控制。
The vertical feed fly saw, equiped on most straight welding pipe sets, can not be suitable to cut square shaped pipes because of serious deformation on the cut face.
当前一些直缝焊管机组所配备的垂直进锯型飞锯因易造成切断端面严重变形，不适合锯切正位生产的方矩型类管材。
The axial feed is provided by the carriage or the compound rest, either manually or automatically, whereas the depth of cut is controlled by the cross slide.
轴向进给通过大拖板或复式刀架手动或自动提供，然而切削深度则由横向滑板控制。
Manual feed, manual cut, easy operation and economic benefits.
手动进刀，手动切布简单易懂，经济实惠。
Then, the bride and groom will cut the first piece of cake and feed each other in front of the guests.
然后，新娘新郎切第一片蛋糕，在客人面前，彼此喂著。
To avoid a power cut, they decided to feed off an alternate generator.
为了防止停电，他们决定靠备用发电机发电。
To avoid a power cut, they decided to feed off an alternate generator.
为了避免停电，他们决定靠备用发电机发电。
A quadratic model of predicting helical milling force was researched. The effects of spindle speed, feed per tooth, and axial and radial depth of cut were analyzed.
通过统计学中的响应曲面法建立了螺旋铣削过程中切削力的二阶模型，并分析了主轴转速、每齿进给量、轴向和径向切削深度等因素对切削力的影响。
The ensilage harvester may complete to cut the crops, to cut to pieces, to throw into the feed trailer.
青贮饲料收获机可完成对青贮作物的切割、切碎，抛送至饲料挂车中。
At the wedding reception, the bride and groom greet their guests. Then they cut the wedding cake and feed each other a bite.
在结婚宴会上，新娘新郎向宾客问候。然后切结婚婚蛋糕并互相喂对方一口。
An analysis of feed system design of an economical revolving cut machine is made on one's own master development.
对自主开发研制的经济型旋切机进给系统的设计进行了分析。
An analysis of feed system design of an economical revolving cut machine is made on one's own master development.
对自主开发研制的经济型旋切机进给系统的设计进行了分析。
应用推荐