Inspection information model of based on feature technique is introduced. Inspection data model of based on feature measurement surface is established.
介绍了基于特征技术的检测信息模型，建立了基于特征测面的零件检测数据模型。
Study of feature points detecting technique for trajectory measurement system.
轨迹测量系统中特征点检测技术研究。
The design of logic architecture for embedded system is studied based on the basic function and feature of universal electronic measurement instruments.
围绕通用电子测量仪器的基本功能与特点，研究嵌入式系统的逻辑结构设计方法。
Its main feature is that measurement of remelting rate parameter has come out making use of weighing model which improves control condition on field.
其中主要的特点是利用称重模块成功地实现了熔速参数的测量，改善了现场的控制条件。
Because of the complexity of portal setups and environments, WebSphere portal delegates response measurement, reporting, and diagnosis to additional feature-rich products such as ITCAM.
由于门户设置和环境的复杂性，因此，WebSpherePortal将响应度量、报告和诊断委派给诸如itcam之类的功能丰富的其他产品。
Reovering the feature point and feature line is the basic in the computer visual inspection, the high-precision is asked in the measurement of industry.
特征点、特征线的提取是计算机视觉检测的基础，特别是在工业检测中要求很高的精度。
The relationship between the detection of feature points and the measurement of motion parameters is studied in this instance of ignoring the camera calibrate errors.
在不考虑摄像机内外参数标定误差的情况下，研究了标志点像元的测量精度对运动参数测量的影响。
The extraction of feature lines for shoe instep surface curve was realized by joint-type measurement arm in Coordinate measurement in shoe instep.
鞋楦坐标测量采用关节式测量手臂实现鞋楦曲面特征线的提取。
Finally, space parameter measurement method based on feature point selection was designed to accurately measure the distance, Angle and volume of cutting motor structure.
最后，设计出基于特征点拾取的空间参数测量方法，实现剖切后发动机结构空间距离、角度和体积的精确测量。
It presents the model and feature of content-based image retrieval system, and then discusses some methods of feature abstraction and similarity measurement based on color, texture and shape.
首先叙述了基于内容的图像检索的系统模型和特点，接着针对颜色、纹理和形状进行了概率特征提取、相似度量等的进一步具体分析讨论。
A measurement system was designed to pick up image feature parameters of trash in cotton and to dispose these parameters.
用自行设计的皮棉杂质测量系统提取皮棉杂质图像特征参数并进行处理。
Its major parts-the operating principle and circuit feature of drivers, the equipment for measurement of telescope position and infrared photometer are introduced.
详细地描述了它的主要部份——驱动装置，测角装置、红外光度计的工作原理和电路特点。
According to the feature of contacting measurement, the dissertation first puts forward the twice-sampling planning method for free-form surface in order to improve measuring efficiency.
根据接触测量的特点，为提高测量效率，本文提出了一种两次采样的曲面数字化规划方法。
The principal research of content based image retrieve (CBIR) includes two aspects: visual feature representation and similarity measurement.
基于内容的图像检索(CBIR)技术的研究主要包括两个方面：可视化特征提取和相似性度量。
To solve the problem of filtering divergence, a method to estimate the statistical feature of measurement noise was introduced.
针对滤波发散的问题，引入了一种在线估计观测噪声统计特性的自适应滤波方法。
Besides common geometric measurements such as distances and angles, a new measurement of average curvature energy defined for boundary curve segment is included in the set to describe curve feature.
除了常见的几何测量(如距离和角度)外，提出了一种平均曲率能量的测量方法来描述边界曲线特征。
The two laser beam system has been used to measure the relative density of linen dust, with the feature of wide measurement range, good sensitivity and restraining the intensity fluctuation noise.
本文采用双光路激光系统，对亚麻尘的相对浓度进行了连续测量，具有测量范围宽、灵敏度好、抑制激光强度起伏噪声等特点。
The work principle, basic composition and feature of a bend flow meter are presented, and its application in measurement of steam heat supply is described.
介绍了弯管流量计的工作原理、基本组成、性能特点，及其在蒸汽供热计量中的应用。
It extracts and tracks feature point sets in the environment with single camera, and then calculates position and pose of the robot with measurement model and extended Kalman filtering.
利用单目摄像头提取和跟踪环境特征点集，进而根据观测模型利用扩展卡尔曼滤波算法估算出机器人的位姿。
On the basis of the feature analysis made on the magnetic potentiometer, the automatic measurement of heavy A.
基于对磁位计特点的分析，介绍了以磁位计为采样元件的交流大电流自动测量方法。
In terms of the feature of radius compensation for coordinate measurement, the natures of offset curve and surface are studied in the dissertation.
根据坐标测量需进行测头半径补偿的特点，研究了正则等距曲线曲面的有关性质。
The structure and application scope of an air pollution measurement system are introduced, and it is mainly described the application and feature of industrial workstation in the whole system.
介绍工业污染源大气污染物排放连续监测系统的系统结构和应用范围，重点讨论一体化工作站在此系统中实际应用和性能特点。
So the measurement and control in the feature size of photomask can reduce the reject of IC and research on this area is very meaningful.
对掩模特征尺寸及缺陷进行检测可以减少集成电路的废品率，因此开展这方面的研究具有重要意义。
A gradient-based stereo image matching algorithm is developed by using the image gradient-related as the matching feature, especially for the space size measurement of a small region.
面向局部检测区域小的空间尺寸测量问题，利用图像的梯度相关作为匹配特性，开发一种高效的基于梯度图像的立体匹配算法。
As feature size shrinks, especially with the use of resolution enhancement techniques, accurate measurement of image quality parameters in situ is indispensable for the lithographic tools.
随着光刻特征尺寸的不断减小，尤其是随着分辨力增强技术的使用，像质参数的原位检测已成为先进的投影光刻机中不可或缺的功能。
By the method of frequency measurement, instant rotational speed is measured in the test system, angular acceleration is calculated by using the feature of the MCU with the least square method.
介绍了一种发动机无外载功率检测系统的软、硬件设计，利用测频法测量出某一时刻的瞬时速度，并利用最小二乘法求出角加速度。
Three-dimensional reconstruction of the surface grid is directly related to the quality of the objects cognitive, feature extraction and three-dimensional measurement applications, such as follow-up.
三维表面网格重建效果的好坏直接关系到人们对物体的认知、特征提取和三维测量等后续应用。
The measurement space feature and the general characterization concept of single and double soft fault in linear circuits are presented.
文中介绍了线性电路单一软故障和双软故障所具有的电压增量空间特性和统一特征概念。
The measurement space feature and the general characterization concept of single and double soft fault in linear circuits are presented.
文中介绍了线性电路单一软故障和双软故障所具有的电压增量空间特性和统一特征概念。
应用推荐