This work was validated by physical test and by comparison with FE analysis.
这个工作是使被有效身体的测试和借着比较用fe分析。
Ultimate bearing capacity of cable-girder anchorage zone was calculated by nonlinear FE analysis.
采用非线性有限元方法计算了索梁锚固区的极限承载力。
For the bridge of complex geometry shape, body element analysis has excellent advantage in the FE analysis.
对于具有复杂几何形状的桥梁，用体单元进行有限元分析有得天独厚的优势。
Through the studies above directions to correctly establish the FE model and carry out FE Analysis have been provided.
以上研究为后续正确合理地进行有限元建模及分析提供了指导。
Software ANSYS was utilized to conduct FE analysis of the foundation-pile bearing capacity of the wharf to be renovated.
采用ANSYS软件对某高桩码头拟改建后的基桩桩力进行了有限元分析。
On this basis, the static load the contact stress of gear engagement fe analysis, and traditional gear strength calculation method to compare.
在此基础上，对静载荷作用下齿轮啮合对的接触应力进行有限元分析，与传统的齿轮强度计算办法作比较。
The effects of strength matching and specimen geometry on the fracture behavior for welded joint are conducted by 3-d fe analysis based on the local approach.
基于局部法定量研究了焊接接头中强度匹配、试样几何形式对接头断裂行为的影响。
The temperature distribution in two different continuous casting moulds during a steady casting process was numerically simulated with a commercial FE analysis code ABAQUS.
采用结构分析有限元软件ABAQUS对具有不同冷却系统的两种结晶器在工作过程中的稳态温度场进行了模拟。
Structural FE analysis on an integral bus is performed, in which optimal design of multiple performance objectives of structural strength, vibration modal frequency and mass is researched.
对某全承载式大客车进行了结构有限元分析，研究了该客车结构强度、振动模态频率、质量等多个性能目标的优化设计问题。
The distributions of stress and displacement of the integrity of the ladle turret under the actions of self-weight and the static loads are firstly obtained based on the static FE analysis.
通过静力有限元计算，得到了钢水罐回转台在自重和钢包满包载荷作用下的应力和位移分布，进而对结构的强度和刚度进行了分析。
A finite element(FE) model for a tripot universal joint is developed, and a FE analysis on the contact stresses in the parts of the joint under extreme torque is conducted using ANSYS software.
将轿车三枢轴式等速万向节的三维模型经过结构简化离散成有限元模型，并应用ANSYS软件对其承受极限转矩时的内部接触应力进行有限元分析。
The FE analysis to the rotor of a multistage centrifugal pump has been studied based on the software ANSYS. The entity model and FE model of the rotor are built for the static and modal analysis.
使用ANSYS软件对一台多级离心泵的转子部件进行有限元分析，建立了转子部件的实体模型和有限元模型，对转子部件进行静力及模态分析；
The effects of strength mis-matching and specimen geometry on the resistance behavior to ductile crack growth for welded joint were conducted by 3-D FE analysis considering the micro-plastic damage.
通过考虑材料微观塑性损伤，定量研究了焊接接头中强度匹配、试件几何形状对接头抗延性裂纹扩展行为的影响。
The FE analysis also shows that with properly created model, the penetration process, penetration properties of steel plate by FSP and target damage mode can be simulated very well by using FE method.
有限元分析结果还表明，采用适当的模型，有限元法能较好地模拟破片模拟弹侵彻钢板的侵彻过程、侵彻特性以及钢板的破坏模式。
This article explodes the operation procedures of city marketing based on the analysis of its basic meaning and fe.
本文在分析城市营销基本内涵及其特点的基础上，对城市营销的运作流程加以剖析。
The types of Fe oxides and their relation to phosphate adsorption or desorption on clay fractions were investigated by means of XRD and chemical analysis methods.
应用X射线衍射和化学分析等手段研究了红壤、砖红壤和黄棕壤中氧化铁类型及其与磷吸附和解吸的关系。
Distribution characteristics of the heavy metal species in soils were studied by speciation analysis of heavy metals in the soils near Cu Fe tailings in Daye.
通过对大冶铜绿山铜铁矿尾矿库周围土壤中重金属形态分析实验，研究了重金属各种形态在土壤中的分布特征。
Based on the elastic-plastic FE theory, the Punching Bonding process of the automobile sheets is simulated by using ANSYS analysis software in this paper.
采用有限元分析软件ANSYS，基于弹塑性有限元理论建立有限元模型，对汽车板件冲压连接过程进行了模拟。
Methods and procedures of FE mechanics modelling of power spinning process of varying thickness conical parts with analysis of certain problems necessary for treatment in such establishing.
介绍了变壁厚锥形件旋压过程数值模拟的有限元力学模型建立的方法和步骤，以及分析了在建立力学模型时要处理的一些问题。
This paper introduces the testing results, analysis and design method, and manufacture technology of industrial machine of Nd-Fe-B single-phase synchronous motor.
介绍了钕铁硼永磁单相同步电动机产品样机的试验结果及分析、设计方案和试制情况。
Ash component analysis before and after deashing of Datong coal indicated that a linear relationship exists between ash content in deashed coal and total contents of Si and Fe in the ash.
对大同烟煤脱灰前后的灰组成分析表明，高精煤中的灰分含量与其所含的硅、铁组分的质量之和呈线性关系。
Stability method based on slip surface FE stress and shear strength reduction method are two principal methods for FEM slope stability analysis.
基于滑面上应力分析法和强度折减法是边坡稳定有限元分析方法中两类主要的方法。
Based on correlation coefficients and principal component analysis, fe and al were selected as the concentration normalizer for the different trace metals.
由相关系数和主成份分析，选择铁和铝作为沉积物中痕量金属浓度的均一化元素。
A method for the analysis of an, ag, Zn, Cu, Ni, Co and fe in ion-exchange resins at the different stages of technological processes of leaching Au using ion-exchange technology was developed.
本工作对离子交换法提取金的工艺生产过程不同阶段离子交换树脂中的金及其它元素银、锌、铜、镍、钻和铁的分析进行了研究。
On the basis of analysis of activated silicon and aluminum components, a new smelting process of Si Al Fe alloy by use of coal spoil for replace a part of bauxite was proposed.
通过分析煤矸石的活性硅、铝成分，提出了以煤矸石代替部分铝钒土冶炼硅铝铁合金。
D assembly FE modeling and dynamic elastoplastic analysis are carried out for the obturator structure of a floating gun breech mechanism by using nonlinear finite element code MSC MARC.
利用大型非线性有限元MARC ，对某自动迫击炮浮动炮闩闭气结构，进行了三维装配体有限元建模和动态弹塑性分析，获得了关键闭气构件的应力、塑性应变和变形的动态响应。
In this paper, a composite grid method (CGM) for finite element (FE) analysis of an electromagnetic field with strong local interest is proposed.
本文描述了对有需要着重分析的局部区域的电磁场进行有限元分析的复合网格法。
The structural dynamic analysis of the test-bed of micro ma chine tool using finite element (FE) and experimental approaches is made.
利用有限元和实验的方法，对微型机床试验台进行了结构动态特性分析。
The structural dynamic analysis of the test-bed of micro ma chine tool using finite element (FE) and experimental approaches is made.
利用有限元和实验的方法，对微型机床试验台进行了结构动态特性分析。
应用推荐