With modern CAD method and smart skill of making mesh used, finite element (FE) model is established and the problem of complicated structure and large dimension is solved.
应用计算机辅助设计和有限元网格划分的技巧和方法建立有限元模型，有效解决车体结构复杂和尺寸庞大的问题。
The FE analysis also shows that with properly created model, the penetration process, penetration properties of steel plate by FSP and target damage mode can be simulated very well by using FE method.
有限元分析结果还表明，采用适当的模型，有限元法能较好地模拟破片模拟弹侵彻钢板的侵彻过程、侵彻特性以及钢板的破坏模式。
In this paper, a composite grid method (CGM) for finite element (FE) analysis of an electromagnetic field with strong local interest is proposed.
本文描述了对有需要着重分析的局部区域的电磁场进行有限元分析的复合网格法。
With modern CAD method and smart skill of making mesh used, finite element(FE) model is established and the problem of structure of heavy truck body and large dimension are solved.
应用计算机辅助设计和有限元网格划分的技巧和方法建立有限元模型，有效地解决矿用汽车货箱结构和尺寸庞大的问题。
Objective to establish an optimal method to determine the contents of Fe and dextran in the nanometer iron compound.
目的建立适用于纳米铁包合物中铁及右旋糖酐含量测定的方法。
The paper reports atomic absorption spectrum for determination of trace Fe in additional Fe salt. The reliability of this method is examined by mathematical statistics way.
本文采用原子吸收分光光度法，测定铁强化盐中微量铁。用数理统计方法检证了方法的可靠性。
The Al, Pb, Cu, Cd, Fe, Sn etc trace element in the electrolytic zinc were accurately and quickly measured by using ICP-AES method.
采用ICP—AES法准确、快速地测定电锌中的铝、铅、铜、镉、铁、锡等微量元素，并对方法的准确度和精密度进行了检验。
The special microcomputer software for calculation of slot electric field is worked out with fe method, and the field distribution in stator slot winding of large generator is calculated.
采用有限单元法，编制了适用于微机系统的槽部电场计算专用软件，计算了大型发电机定子线圈槽部电场的分布。
FE method in RSD: observations FE methods are capable of predicting quite accurate deformation behaviour such as roll contact stresses, rolling load, and rolling torque required for RSD.
有限元方法rsd为：观测有限元方法是相当准确的预测能力变形行为，如辊接触应力，轧制负载和轧制力矩为区署要求。
According to the characteristics of active filter, Fe-Si-Al is used and minimum volume method is adopted to optimize the design of inductance.
根据有源滤波的特点提出了采用铁硅铝作为铁心材料，利用最小体积法对电感进行了优化设计。
Although, the FE method provides various detailed information, it can be difficult to analyse.
虽然，有限元方法提供各种详细信息，它可以难以分析。
The spatial field FE discrete method of the virtual work equation and the time field central difference discrete method of the FE equation in the dynamic explicit method are described in detail.
详细分析了动力显式算法中虚功方程的空间域有限元离散方法和有限元方程的时间域中心差分离散方法。
Method: 96 cases of MRI of childhood head and spinal diseases were collected and analyses and FE sequences were compared with se sequences.
方法：收集分析了96例儿童头颅脊柱病变的MRI检查结果并对FE及SE序列进行了比较。
In this paper, the Ni, Ni-Co, Fe and Ni-Fe magnetic fibers were prepared by thermal decomposition reducing method of gel precursor fibers.
本文采用凝胶前驱体纤维热分解还原法制备了镍、镍-钴、铁、镍-铁四种磁性金属纤维。
When producing the rare earths Fe-Cr-Al alloy by electroslag remelting method, the optimum quantity of rare earths added to three phase lining electroslag furnace is 0.5%.
电渣双联法生产稀土铁铬铝合金时，稀土在三相有衬电渣炉中的最佳加入量为0.5%。
The principle and limitation of the efficiency tracing method is described in fe paper.
本文描述了效率示踪法的原理、局限性；
The results indicate that the theoretical results are right, and the FE model and experimental method are feasible.
结果表明理论分析方法是正确的，有限元模型和模态实验方法也是可行的。
A method for the analysis of an, ag, Zn, Cu, Ni, Co and fe in ion-exchange resins at the different stages of technological processes of leaching Au using ion-exchange technology was developed.
本工作对离子交换法提取金的工艺生产过程不同阶段离子交换树脂中的金及其它元素银、锌、铜、镍、钻和铁的分析进行了研究。
A finite element (fe) method for the prediction of the equivalent heat transfer parameters of the composite material with random multi-scale grains was presented.
针对预测多种尺度颗粒随机分布复合材料等效热传导参数的难点，提出了一种多尺度有限元方法。
The determination results of Cu, Zn, Fe in mussels, a standard substance, proves that microwave digestion method is better than the traditional digestion method.
通过对校准物质贻贝中的铜、锌、铁的测定结果证明微波消化方式比传统的消化方式优点多。
A new technology for preparation of Ti-Fe alloy coating on the steel substrate was investigated by high temperature sintering method.
进行了高温烧结法在钢基体的表面上制备钛铁合金涂层的新工艺研究。
A new method of recovery of pure Fe powder from the magnetic filtered product in cold-rolling emulsion is reported in this article.
报道了从冷轧乳化液的磁过滤产物中回收纳米铁粉的一种新方法。
This paper studies the effects on pure fe surface and the microstructure using the method of permeating re combined with laser melting modification.
研究了渗稀土激光熔凝复合处理对纯铁表面耐磨性能及微观组织的影响。
Pure Fe nanopowders were prepared successfully by method of anodic arc discharging plasma.
采用阳极弧放电等离子体制备了高纯铁纳米粉末。
This FE method will help to analyze the behavior of rectangular concrete-filled steel tubular column while parameters change.
本文方法对于钢管混凝土柱的非线性分析具有借鉴意义。
This FE method will help to analyze the behavior of rectangular concrete-filled steel tubular column while parameters change.
本文方法对于钢管混凝土柱的非线性分析具有借鉴意义。
应用推荐