Test method directly through the testing to obtain the fatigue data.
试验法直接通过试验来获取所需要的疲劳数据。
In this paper, Bayesian method for statistical analysis of fatigue data for Marine materials is discussed.
讨论了舰船材料疲劳统计分析中的贝叶斯方法。
A method and related fatigue data is provided for the fatigue life design of the similar parts described in the paper.
并为类似零部件的疲劳设计提供了方法和相关疲劳数据。
Over the years, Boeing has probably accumulated more data on the fatigue life of airframes than any other plane-maker.
多年来，波音公司可能已经积累了比任何其他飞机制造商更多的有关飞机机体疲劳寿命的数据。
Moreover, the test data were statistical treated with the method recommended by IIW and compared with fatigue strength of structural steel with identical joint type.
用国际焊接学会推荐的方法进行统计处理，并和相同接头形式结构钢的疲劳强度进行了比较。
The paper analysed the existing fatigue experimental data processing, and gave a nonequidistancegrey GM(1, 1) model and method on the fatigue experiment data processing and on-line control.
在分析疲劳试验数据处理的现状后，提出疲劳试验数据处理及疲劳试验数据在线监测的非等间距的灰色GM（1，1）模型与方法。
The pull-pull fatigue test data of both laser shocked and unshocked test pieces (or sections) are obtained.
得到了这两种铝合金冲击和未冲击的拉一拉疲劳试验数据。
Several soil fatigue models are introduced into the program and the results have been compared with the observed data.
比较不同的桩侧土体疲劳计算模式的分析结果，并用工程实测数据验证计算值。
In this paper the fatigue test data of rail steels are collected and summarized.
本文收集和总括了钢轨钢的疲劳试验数据。
The test data show that laser shocking can improve effectively the properties of aviation aluminium alloys against fatigue fracture.
试验数据表明，激光冲击能有效地提高航空铝合金抗疲劳断裂的性能。
This paper provided the experimental research results of fatigue design methods and design data of infinite life under uniaxial load.
本文提供了作者在单轴载荷下的无限寿命疲劳设计方法和设计数据研究方面的试验研究结果。
The sampled data, sampled waveform and graph can be real time displayed, so that a supervision for the status of surface fatigue crack growing can be accomplished.
通过监测系统软件设计，实现对采样数据、波形和图形进行实时屏幕显示，对表面疲劳裂纹扩展进行动态监视。
It is important to judge the suitable type of distribution properly from a group of test data in fatigue and reliability research on mechanical parts.
由一组试验数据准确、简便地判断出其合适分布类型，对机械零部件的疲劳研究和可靠性分析十分重要。
The loads and the distribution of stress amplitude frequency are obtained by cycle count and reliable data for fatigue design are provided by probability density function fit.
用循环计数法求出载荷及应力幅频率分布，用概率密度函数拟合，为疲劳设计提供可靠性高的数据资。
Bending fatigue limit stress is still short of reliable data for gear of domestic material in gear design mostly used are the data offered from ISO6336.
在齿轮设计中，国产材料齿轮的弯曲疲劳极限应力仍然缺乏可靠的试验数据，大多是沿用ISO 6336提供的数据。
According to the data of fatigue strength in the "standard", a simple method of probabilistic fatigue strength design is suggested, and the content of the "standard" can be complimented and modified.
基于设计规范中的疲劳强度数据，提出了一种简便、可行的强度概率设计方法，使设计规范中的内容得到补充和修正。
This method can make the fatigue test result with great dispersion be processed reasonably, so as to provide correct test data for appraisal of material fatigue and estimation of fatigue life.
该方法使分散性很大的疲劳试验结果得以合理处置，从而可准确地提供试验数据，供作材料疲劳鉴定与疲劳寿命估算之用。
Using present bending fatigue limit data of gear tooth and other materials of gears, the calculating method of re liability is proposed for bending strength of gear tooth st steady condition.
利用现有齿根弯曲疲劳极限应力数据及其它齿轮资料，提出了稳定工况下齿轮齿根弯曲强度可靠度计算方法。
Availability of this method was verified by the failure life data of fatigue sample.
疲劳试件失效寿命数据验证了方法的有效性。
If the plastoelastic fatigue notch factor was regarded as the transforming factor of damage calculation, the data scattering zone of life curve was most narrow.
采用此方法确定疲劳缺口系数，获得的损伤参量与裂纹形成寿命关系的数据分散带最窄。
To obtain data of the fatigue short cracks progression in large extent, specimens with different circle indentation gauge were tested and different load condition was applied.
为得到宽范围内的疲劳短裂纹扩展数据，分别对不同试样缺口尺寸和不同载荷条件进行了疲劳试验。
In identifying parameters of the models, isothermal fatigue test results were applied A method using isothermal cycle data for predcting thermomechanical fatigue life bine was developed.
在确定模型的一些参数时，采用等温力学试验和疲劳试验的数据，把等温疲劳研究成果推广到变温疲劳分析领域。
These results have been provided the essential data for programme fatigue testing and optimal design spectrum and static strength proof.
为室内程序疲劳试验谱、有限寿命设计谱和静强度校核提供了可靠的依据。
According to the given experimental constant amplitude fatigue life group data, the three parameter exponential function equation can be adopted to describe the constant fatigue P-S-N curve.
对于给定的等幅疲劳成组试验数据，利用三参数幂函数方程来描述P - S - N等幅曲线。
With this method, data collected from the field test were calculated, and the threshold was gained which can be used to determine the generation time of driving fatigue.
运用该方法对现场试验采集的数据进行计算，得到了能够确定驾驶疲劳开始产生时刻的驾驶疲劳度的阈值。
This device is possessed of the function with 16-channel highly accurate data collection and 100 million-cycle fatigue life count.
该装置具有16通道的高精度信号采集、分析功能和计数容量为100万次的疲劳耐久性及寿命测试功能。
How the variation of take-off suspension weights affects the structural fatigue life is investigated through surveying actual flight parameter recorder (FPR) data.
主要通过飞行参数记录仪(FPR)记录的数据研究战斗机起飞外挂重量对飞机结构疲劳寿命的影响。
Asphalt mixture fatigue life, cumulative dissipated energy and initial modulus data showed a logarithmic normal distribution.
沥青混合料的疲劳寿命和累积耗散能以及初始模量数据呈对数正态分布。
Asphalt mixture fatigue life, cumulative dissipated energy and initial modulus data showed a logarithmic normal distribution.
沥青混合料的疲劳寿命和累积耗散能以及初始模量数据呈对数正态分布。
应用推荐