The failure modes of concrete covers were analyzed by use of the micro-plane theory.
应用微平面理论分析混凝土保护层的破坏模式。
In this paper, the failure modes of shear and working breadth for shear are discoursed.
文中还对板的剪力破坏形态和工作宽度进行了论述。
On this basis, discuss the failure modes of the slope and the impact of excavation soil.
在此基础上，讨论了边坡的破坏模式及土体由于开挖作用的影响。
However, it is very possible to have many failure modes of aircraft engineering structures.
但对于飞行器结构来说非常有可能出现几种失效模式的混合情况。
Reliability of structural systems is related to the possible failure modes of the structures.
模糊系统的可靠性评估是工程中倍受关注的重要问题。
The operation characteristics and main failure modes of low-voltage circuit breaker were analyzed.
分析了低压断路器的工作特点和主要故障模式。
Analysing the failure modes of each component, constructs the fault trees of both CACS and refrigeration system.
在空调系统各组成单元故障模式分析的基础上，分别建立了集中空调系统和制冷系统的故障树。
The deformation failure modes of high cut slopes are summarized, and analyzing the deformation failure mechanism.
总结了路堑高边坡的变形破坏模式，并对其变形破坏机理进行了分析。
Fretting wear and its induced fatigue and fracture of wires was one of the major failure modes of the hoisting ropes.
钢丝间的微动磨损以及由此引起的钢丝的疲劳断裂是提升钢丝绳失效的主要原因之一。
Different deformation and failure modes of the soil slope, the consequences and people's responses are also quite different.
不同的边坡结构，其变形破坏模式不同，所采取的防治措施也不同。
This paper investigates one of the failure modes of suspension membrane structures-plastic tensile collapse of the membrane.
本文对悬膜空间结构的一种破坏模式——膜的塑性拉伸失稳破坏进行探讨。
The major influence factors of stability and the deformation and failure modes of consequent bedding rock slope are summarized.
对影响顺层岩质边坡稳定性的主要因素及其变形破坏模式进行了研究总结。
There are many failure modes of plastic parts during trial molding process. Every failure mode is in relation to improper designs.
在试模过程中，成型的塑件有多种失效形式，而每种失效形式都和模具设计不合理有关。
Main failure modes of automobile water pump bearings are: breakage of shaft, wear and fatigue flaking of rolling contact surfaces.
水泵轴连轴承失效形式主要为：心轴断裂，心轴滚动表面、外圈沟(滚)道表面、滚动体表面的磨损和疲劳剥落及密封失效。
More researches are badly needed to establish dynamic failure modes of rock mass and to carry out quantitative mechanical analysis.
但岩体动力破坏模式的建立和定量的力学分析还需更多研究。
The failure modes of the combination valve hot forging die in normal working condition are wear, collapse or cold hot fatigue crack.
气门锻模正常失效方式为磨损、压塌和冷热疲劳裂纹。
The distribution of failure modes of a two bay and two-storey frame are given in this paper by faking a great number of computations.
通过计算绘出了双层双跨刚架的破坏机构分布图；利用功能函数对该刚架进行了可靠度分析。
This paper examines the failure modes of ductile metal plates subjected to impact by rigid flat-ended projectiles at normal incidence.
对延性金属靶板在刚性平头弹丸正撞击下的破坏模式进行了研究。
Based on the working environment of offshore platform and structural feature, other failure modes of structure are researched in this paper.
本文针对海上平台的工作环境及结构形式特点分析探讨了构件的其它一些破坏模式。
Considering the buckling failure modes of ship deck, a method of assessing the reliability of ship structure under slamming load was proposed.
针对甲板结构受压屈曲的失效模式，提出一种砰击载荷作用下舰船结构的可靠性分析方法。
The Paper Presents a feasible study of modeling on tool life for the failure modes of tool wear and fracture based on methods of catastrophe theory.
介绍了基于突变论的方法建立刀具磨损与破损失效寿命模型的可行性的研究结果。
The failure modes of batteries as a result of out of control of assembly and the phenomena occurred during testing with battery tester are described.
概述了不同情况的组装失控引起的蓄电池组失效及用蓄电池试验器检测时的现象。
Through pullout tests for shear resistance of the adhesive steel bar in the metal tube, the bond principals and failure modes of adhesives are studied.
通过对钢筋与金属套筒之间采用植筋胶粘结的拉伸抗剪试验，探讨了植筋胶的粘结机理和拉伸抗剪破坏模式。
The deformations, strains of tubes, axial bearing capacity, and failure modes of specimens and concrete core were measured and obtained during the test.
采用两种不同的加载方法，获取了各试件的变形、应变、破坏形式及极限承载力，并在试验后观察其内部混凝土的破坏形态。
Objective To compare the fracture resistance and failure modes of endodontically treated human upper premolars restored with different postcore systems.
目的比较不同桩修复离体牙对修复体整体抗折强度的影响。
This paper introduces the four basic failure modes of three types of shafts, and explicates the multi failure mode related mechanical reliability analysis approach.
介绍了三种类型的轴的四种基本的失效模式，给出了多失效模式相关时的机械可靠性分析方法。
The fracture strength of rectangular plate with inclined crack is analyzed considering two failure modes of elastic fracture and fully plastic failure respectively.
对具有中心穿透斜裂纹在弹性断裂和完全塑性断裂两种破坏模式下的断裂强度进行了分析。
Different ductile behaviors and failure modes of four connections are investigated, and the critical issues that affect the failure modes of the connections are tested.
文中归纳了四个节点的延性特征和破坏模式，在有限元和试验结果对比的基础上，分析了节点不同的破坏模式以及影响节点破坏模式的主要因素。
In addition, the influences of the diameter and spacing of reinforcing steel bars and the thickness of covers on the failure modes of the concrete covers were evaluated.
此外，分析了钢筋直径、钢筋间距和保护层厚度对保护层破坏模式的影响。
In addition, the influences of the diameter and spacing of reinforcing steel bars and the thickness of covers on the failure modes of the concrete covers were evaluated.
此外，分析了钢筋直径、钢筋间距和保护层厚度对保护层破坏模式的影响。
应用推荐