• The automatic extrusion die storage system can be set up either indoors, or in the open (isolated).

    挤压模具自动仓储系统可以建于室内敞开的空间(独立的)。

    www.dalilvcai.com

  • The manufacturing process of the small cemented carbide rotors, and extrusion die design are described.

    本文阐述硬质合金转子研制过程挤压设计进行了探讨。

    dict.cnki.net

  • The simulation results show the validity of employed finite element method and it can provide theoretical instruction for aluminum extrusion die design and technique parameters selection.

    模拟结果表明所用有限体积有效可以铝型材挤压模具设计工艺参数选择提供理论指导

    dict.cnki.net

  • The extrusion die for plastic profile is the key equipment of its production, and has a great effect on the quality and the production circle.

    塑料异型材挤出塑料异型材生产关键技术设备之一,直接决定型材制品质量生产周期

    dict.cnki.net

  • An example shows the application of the CAD of cold extrusion die for slot wedge.

    并结合一个应用实例说明cad系统应用

    dict.cnki.net

  • Introduce process flow of antistatic packaging tube. Briefly introduce extrusion die structure and creative auxiliary machine for a special purpose.

    着重介绍防静电包装生产工艺流程。对挤出模具结构独创专用辅机也做了简要介绍

    dict.cnki.net

  • The technological process of artificial skiing lawn by plastic extrusion method was introduced. The extrusion die design of artificial lawn was also discussed.

    介绍了利用塑料挤出生产人工草坪生产工艺探讨了人工草皮和固定网挤出模具设计

    dict.cnki.net

  • Transferring the extrusion die emulation into the general graphic one, this paper describes the graphic emulation model and its implementation of extruding process for plastic extrusion die in detail.

    通过挤出仿真抽象概括一般图形仿真方法,即模型建立图形实现。并就方面详细地作了阐述描绘,以期达到推广应用图形仿真一新技术目的。

    dict.cnki.net

  • The utilization ratio of the material and the production efficiency can be increased by using the extrusion die in hex pipe production.

    利用挤压方法生产六方套,不仅提高材料利用率而且提高生产效率

    www.chemyq.com

  • It put forward to the condition accepted for simplified design of extrusion die considering the influencing effects of "clamshell phenomenon" on the flow uniformity of die.

    考虑到现象挤出流动均匀影响提出挤出简化设计容许条件

    dict.cnki.net

  • The application of the new method proves to be significant in shortening the design and manufacturing cycle and heightening the quality of extrusion die for plastic profiles.

    经实践证明方法有效地缩短挤出模具开发周期提高了模具质量

    dict.cnki.net

  • The primary unit of extrusion line is extruder machine. Auxilaries (downstream) include modules located after extrusion die: cooling section, hauling-off (puller) unit, cutter, overturning table.

    挤出线主机组成部分挤出辅机(下游设备)包括挤出模具冷却部分牵引机切割机翻转

    ericlshlee.blog.163.com

  • While manufacturing a hot-extrusion die made of RM-2 hot working die steel, quenching cracks was found during the quenching process.

    制造热挤压模具过程,所用的模具钢rm - 2淬火过程发生淬火开裂

    www.chemyq.com

  • Stress on inlayed blocks of gear axis cold extrusion die and sleeves walls are modeled and ac-counted, and inlayed blocks are analyzed with ANSYS on the basis of stress result.

    齿轮挤压凹及其套筒内壁建模进行应力计算,根据应力结果结构利用ANSYS进行分析,找出薄弱环节进行改进性设计,提高模具使用寿命,为同类设计提供参考依据

    www.dictall.com

  • The plastic profile is produced with extrusion die.

    塑料异型材加工通过挤出成型的。

    dict.cnki.net

  • A renumbering algorithm is presented in this paper. The algorithm optimizes the node number of the aluminium profile extrusion die, makes the bandwidth reduced and the compute speed increased.

    本文种新的结点编号优化算法铝型材模具网格结点编号进行了优化减少了有限元带宽提高计算速度

    dict.cnki.net

  • On base of mastering Aluminum profile extrusion craft, the author parameterize the structure and craft of extrusion die. This is also the base of CAD.

    明确铝型材挤压工艺基础上,将具体模具结构工艺参数实现CAD设计提供基础

    dict.cnki.net

  • The Research on the Stability of Plastic Profile Extrusion Die;

    探讨模块化设计塑料异型材挤出模具设计中的应用。

    www.dictall.com

  • This paper introduces the design of extrusion die in producing hex pipe.

    介绍生产六方套热挤压模具设计方法。

    www.chemyq.com

  • BP artificial neural network and genetic algorithm were applied to the parameters optimization of profile extrusion die on base of the MATLAB foundation.

    基于MATLAB平台将BP人工神经网络遗传算法应用于型材挤压模具参数优化设计

    dict.cnki.net

  • Based on the characteristics of extrusion process, a new method of constructing surface for the streamlined extrusion die is proposed in this paper.

    根据型材挤压特点提出新的流线型挤压曲面构造方法

    dict.cnki.net

  • The flow state analysis of the plastic melt in the extrusion die is the basis of the extrusion die design.

    塑料熔体挤出中的流动状态分析挤出设计基础

    www.chemyq.com

  • Data management technology is one of key technology in the extrusion die CAD system.

    数据管理技术挤压cad系统中的关键技术之一

    dict.cnki.net

  • Based on typical profiles in common use, how to perfect design of plastic extrusion die was discussed from the point of view of plastic profiles assembly and application.

    常用典型型材为例,塑料异型材组装使用角度探讨如何完善塑料异型材模具设计

    www.chemyq.com

  • The added benefits of reduced profile defects and protecting the extrusion die from overheating are not calculated in this financial analysis.

    减少型材次品保护过热挤压模具效益没有计算财务分析中。

    www.dalilvcai.com

  • Extrusion die design for compound triple-layer plastic pipe by two extruding machines is introduced.

    介绍挤出复合三层塑料管材机头模具设计

    dict.cnki.net

  • Based on the actual circumstance of extrusion production of copper lines, the extrusion die and technology flow adapted to the continuous extrusion of copper lines were developed.

    根据铜线挤压生产实际情况开发了适应铜线连续挤压生产需要挤压模具工艺流程

    www.magsci.org

  • Based on the actual circumstance of extrusion production of copper lines, the extrusion die and technology flow adapted to the continuous extrusion of copper lines were developed.

    根据铜线挤压生产实际情况开发了适应铜线连续挤压生产需要挤压模具工艺流程

    www.magsci.org

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定