The basic model and the experimental measurement method of short-distance time-of-flight absorption spectra for determining the temperature of cold atoms are described.
详细介绍了短程飞行时间吸收谱测量冷原子温度的基本模型和实验方法。
Experimental results demonstrate that the proposed vision measurement method of the lateral deviation error can achieve the cm-level accuracy on the general road under the condition of near view.
实车试验表明横向偏差的视觉测量方法在近视野情况下对于一般路面可以取得厘米级的测量精度。
Experimental results show that the sensing method is feasible to selective detection on concentration measurement.
实验结果表明，这种传感方法对溶液浓度的选择性测量是有效的。
Experimental results show that the method can calculate the errors of measurement results effectively.
模拟试验结果表明，该计算方法可以有效的计算出测量结果的误差。
The measurement method, experimental results and the fitting function provide a reference for the polarization device research.
提出的测量方法、测量结果和拟合函数的建立对偏光器件的研究有一定的参考价值。
Oxygen isotope fractionation in amphiboles was determined by theoretical calculation using the increment method and by experimental measurement using isotope exchange technique.
利用增量方法和同位素交换技术，对角闪石族矿物的氧同位素分馏进行了理论计算和实验测定。
Using the proposed technique the measurement and calculation method of material mechanical deformation direction is described. Finally, the experimental results and test data are given.
给出了一般情况下用本技术测量和计算材料机械变形方向的方法，列出了本技术测量的实验数据和结果。
Primary experimental results indicate that the project using the method of non-contact intraocular pressure (IOP) measurement based on laser interference to measure should be feasible.
初步实验结果表明：用激光干涉的方法进行非接触眼压测量这一方案是可行的。
In this paper, the measurement principle and experimental technique of the method is presented. The temperature distributions around a heated mini wire are measured.
本文介绍了激光云纹法的测量原理、实验技术，并利用该方法测量了加热细丝自然对流的微细尺度温度场分布。
The paper studied the measurement method for directivity of phased-array acoustic transmitter in acoustic log by experimental modeling method.
本文通过实验模拟的方法研究了声波测并相控线阵声波辐射器的指向性测量方法。
Simultaneously, experimental method and measurement precision as well as signal process are discussed.
同时，在实验方法、提高测试精度及信号处理等方面作了探讨。
An experimental research on the measurement of elastic modulus of metal filament is made with the laser holographic scattered-spot interference method.
本文采用激光全息散斑干涉法，对金属丝弹性模量的测量方法进行了实验研究。
Experimental study is reported on real time measurement of velocity of solid surfaces by using spacial filtering method.
本文报道了基于空间滤波法对变加速运动物体表面运动速度进行实时测量的实验研究。
Moreover, an experimental method of touch pin measurement to analysis solder joint shapes was put forward, the results show the calculating results and the experimental results were identical well.
提出了一种用触针测量法研究焊点三维形态的实验方法，并对计算结果和实验结果进行了比较，结果表明，计算结果与实验结果吻合良好。
The present study sets up an automatic analytical system for body composition measurement by the experimental method.
采用实验法建立了自动化身体成分测试分析系统。
Experimental results show that this collimation measurement method has high accuracy and good repetition, and can be used in the stripe precise inspection of code-bar invar grade rod.
实验结果表明，该瞄准检测方法的准确度高、重复性好，可用于条码型铟瓦水准尺的分划精度检测。
The authors describe the principle, experimental method and result of the measurement of fast neutron fission factor by means of a solid state nuclear track detector.
介绍了利用固体径迹探测器测量快裂变因子的原理、方法和实验结果。
The theoretical and experimental analyses show that the measurement error of this method is lower than the one recommended in gb4288-84.
经实验与分析，该法的测量误差小于GB4288—84推荐的测量计算方法。
The experimental result indicates that this measure method is feasible on principle, and has directive meaning for realization of on-line measurement of foam on site.
实验结果表明，该检测方法在原理上是可行的，对于在现场实现溶渣泡沫高度的在线检测具有指导意义。
The experimental results show that this method is feasible on principle, and has directive meaning for realization of on-line measurement of the height of foaming slag on site.
在实验室进行了模拟检测实验结果表明，该检测方法在原理上是可行的，对于在现场实现熔渣泡沫高度的在线检测具有指导意义。
The experimental results prove that this method may enhance the ability in measuring star in daytime of optical measurement device and whole measurement precision of measurement ship.
应用这种方法，可以提高光测设备白天测星的能力及测量船的总体测量精度，是一种准实时的、切实可行的白天测星方法。
Then based on the theoretical description and analysis, an improved method for reducing the errors caused by experimental measurement is presented.
在阐述其基本原理及理论的基础上，提出了降低实验误差的改进方法。
The experimental results indicate that the method and the results of measurement are reliable.
实验结果表明，测量方法和测量结果都是可靠的。
The experimental results indicate that the axial measurement precision and repeatability precision are improved markedly by applying the presented method.
实验结果表明，采用这种数据处理方法，测量精度和重复性精度均有所提高。
Through a brief analysis, propose to improve the experimental device and improve the measurement precision of the method.
通过简要分析，提出改进实验装置以及提高测量精度的方法。
With comparison to the experimental measurement results, it is found that the linear method is not able to capture the warpage behavior while nonlinear large deformation simulation can.
与实验测量结果相比，线性方法不能反映翘曲形态而非线性大变形仿真能够反映出这种翘曲。
On the basis of finite element analysis, 5 concrete columns were made to carry on the experimental study about the measurement of working stress of concrete by the ring-hole method.
本文是在有限元模拟分析基础上，制作5根混凝土柱，进行环孔法测试混凝土工作应力的试验研究。
The experimental results show that this method is feasible for the measurement of wet steam in relatively high dryness fraction, the device is ingeniously adaptable in practical use.
实验结果表明，这种测量方法可以满足高干度湿蒸汽测量的要求，具有很好的工业适用性。
This paper describes the principle, device and experimental results of the measurement of the electron temperature of laser-produced plasmas by the X-ray absorption-comparison method.
本文给出了X射线吸收比较法测量激光等离子体电子温度的原理、装置和实验结果。
This paper describes the principle, device and experimental results of the measurement of the electron temperature of laser-produced plasmas by the X-ray absorption-comparison method.
本文给出了X射线吸收比较法测量激光等离子体电子温度的原理、装置和实验结果。
应用推荐