In large aluminum alloy forgings, the change of inside metallurgical defects and the strain fields have been studied by experimental and numerical simulation.
针对大型铝合金件的锻造过程，采用实验与计算机模拟相结合的办法，分别对锻件内部冶金缺陷的变化及其应变场进行了分析。
In order to investigate the resistance characteristics of flap gate, the experimental and numerical simulation studies of resistance loss of flap gate were performed.
采用数值模拟与模型试验相结合的方法对模型泵装置出口拍门的阻力损失进行研究。
On the basis of detecting impact load, studies are carried on regulation of stress wave propagation in one-dimensional rock mass by experimental and numerical simulation.
在测定撞击载荷形式的基础上，通过试验研究应力波在一维节理岩体中的传播规律。
Circular cylinder oscillating in water at rest is simulated to validate the model and the result compared with experimental and numerical simulation data is in good agreement.
为验证模型的可靠性，对静水中的振荡圆柱流场进行模拟，与实验及数值计算结果吻合较好。
Through experimental and numerical simulation researches on the influence of cooling wall on the ventilation characteristics and the air flow characteristics of UFAD system firstly.
首次通过实验和数值模拟方法研究了具有冷却壁面条件时的下送风通风空调系统的气流流动特性及其影响。
In view of dispersion, the application of guided wave NDT of pipe based on magnetostrictive effect was analyzed by the combination of numerical simulation and experimental research.
利用数值模拟和实验研究两种手段，从频散的角度分析了基于磁致伸缩效应的导波无损检测技术在圆管检测中的应用。
Characteristics of wave propagation in grouted rockbolt were investigated with numerical simulation, experimental measurement and theoretical analysis.
用理论分析、数值模拟和实验测试的方法研究了自由锚杆和锚固锚杆中的波传播特性。
Furthermore, the research approaches were also given by using numerical simulation method and experimental simulation method.
还提出采用数值模拟与实验模拟相结合对该模型进行求解的研究思路。
In the thesis, we carried through numerical simulation and experimental study of the stretching process of float glass.
本文对浮法玻璃拉边过程进行了数值模拟和实验研究。
Numerical simulation and calculation in theory are done for the beams strengthening with prestressed CFRP sheets in this paper base on the present experimental results.
本文在参考目前预应力碳纤维布加固梁试验研究成果的基础上，对加固梁进行数值模拟和理论计算。
Effect of reversal time on energy consumption for the regenerative soaking pits is researched by numerical simulation and experimental research.
通过数值模拟和实验方法，重点研究了换向时间对蓄热式均热炉能耗的影响。
Based on experimental data and numerical simulation results, effects of ambient pressure and base bleed on aerospike nozzle base behaviour are investigated.
基于实验数据和数值模拟结果，研究了外界反压和底部二次流对塞式喷管底部的影响。
Theory analysis, numerical simulation and experimental result indicated that the surface electric field of the device was more uniform and the breakdown voltage was increased effectively.
理论分析、数值模拟和实验结果表明，该结构可以使表面电场变得更加均匀，有效提高器件击穿电压。
This paper has carried on the numerical simulation to the present ventilation way by the software PHOENICS, complies the result with experimental result, and the simulation result is reasonable.
本文利用PHOENICS软件对目前的通风方式进行了数值模拟，将模拟结果与实验结果进行了对比，认为模拟结果基本合理。
The in furnace flow field characteristics of a large sized boiler were studied by way of experimental measurements and numerical simulation.
通过实验测量和数值模拟研究了大容量锅炉的炉内流场特性。
The experimental stress is consistent with the theoretical stress and the numerical simulation.
数值模拟结果、试验应力测定结果与理论值比较一致；
The results are compared well with the experimental data that in turn verifies the proposed numerical simulation strategy and method.
结果表明本文采用的分析复合材料结构耐撞性能的模拟策略和方法及建立的有限元模型是合理可行的。
Numerical simulation and experimental results are consistent, and visual effects enhanced significantly.
数值模拟结果与实验结论符合，且可视化效果大大增强。
Thirdly, the study is the numerical and experimental simulation on that the temperature field of the bed in the snake loop heat pipe chemical reactor.
第三部分为热管化学器内部床层温度场数值模拟与试验研究。
This thesis includes the theoretical study, experimental study and numerical simulation of the ground improved with dynamic consolidation method.
论文主要研究内容包括：强夯法加固路基的理论研究、强夯法加固路基的试验研究和强夯法加固路基的数值模拟。
Therefore, numerical simulation and experimental results are in good agreement.
因此，数值模拟与实验结果吻合良好。
The relative computation analysis and numerical simulation were completed on the basis of experimental data, and the result of simulation is agreement with the practical observation result.
依据实验结果进行了有关计算与数值模拟，所做模拟结果与实际观测结果相吻合。
In this paper, the thawing time and center temperature of hemispherical foods were analysed and calculated by numerical simulation method, which were also confirmed using the experimental method.
文中采用数值模拟的方法，针对半球状食品的解冻时间及其中心温度变化进行数值计算和分析，并通过试验进行验证。
It can be seen that the experimental results are in coincidence with numerical simulation results both for the single point defect and multi-point defects.
分别研究了单点缺陷和多点缺陷的情况，实验结果与数值模拟结果基本吻合。
The temperature, volumetric water content and water table evaporation strength in varied air convection velocity were obtained by means of numerical simulation and experimental measurement.
通过数值计算和实验测量，获得了不同大气对流速度作用下土壤中温度、含水率分布。
There are three main research methods in natural ventilation: simple theory analyse method, experimental method and numerical simulation method.
目前自然通风主要有三种研究方法：简单的理论分析法、实验法和数值模拟法。
Based on academic analysis of the jet configuration, the general plan was designed. Using the numerical simulation program and the explode testing system, an experimental plan was established.
通过对大孔径射孔弹射流特征的理论分析，提出总体设计方案，利用数值模拟和爆轰测试进行优化设计确定实验方案。
The main contents of the thesis include the numerical simulation and experimental studies on tunable EDFRL.
本文的主要内容是对可调谐环形腔掺铒光纤激光器工作特性的数值模拟计算和实验研究。
The main contents of the thesis include the numerical simulation and experimental studies on tunable EDFRL.
本文的主要内容是对可调谐环形腔掺铒光纤激光器工作特性的数值模拟计算和实验研究。
应用推荐