Its comprehensive coverage focuses on near net shaping, atomizing, deposition, fiber composite fabrication, evolution of microstructure, and equipment.
它的广泛报导集中在附近网成形、雾化、沉淀、纤维增强复合材料制造、微结构的演变与设备。
The increasing of the hardness and yield strength of 2014 aluminium alloy sheet with electric field aging are mainly due to evolution of microstructure and transformation of texture.
电场时效2014铝合金板的屈服强度和硬度的提高主要归因于其微观组织和织构的转变。
The evolution of microstructure and texture characteristic of 436 ferritic stainless steel sheets, which were hot rolled under different rolling temperatures by EBSD technology, was investigated.
利用EBSD技术研究了不同热轧温度下436不锈钢热轧织构的变化规律和显微组织特征。
The microstructure evolution of Q235 plain carbon steel in multi-pass hot deformation was investigated by means of hot compression simulation.
利用热模拟压缩变形实验研究了Q 235碳素钢多道次热变形及后续处理过程的组织演变规律。
It is important to study deformation behavior, deformation mechanism and microstructure evolution of semi-solid alloys because the semi-solid alloy has special characterization.
由于材料在半固态下具有特殊性质,开展其变形行为、变形机理和组织演化等方面的研究显得尤为重要。
The microstructure evolution models were implemented into the finite-element code, which allowed the prediction of distributions of grain size in the volume of the forging.
有限元分析方法通过应用微观结构演变的编码实现了预测、仿真锻造过程中晶粒的演变过程。
Severe plastic deforming behavior and microstructure evolution of two phases in medium-carbon steel during equal channel angular pressing (ECAP) were investigated by experimental method.
用实验方法研究了中碳钢两相组织在等通道角挤压过程中的强烈塑性变形行为和组织演化过程。
The processing map and activation energy map of the alloy were established by using tested data, and microstructure evolution of deformed samples was also examined.
利用实验数据建立了合金的热加工图和热激活能图,对变形过程中组织演化进行了研究。
It is proved that the so-called granular bainite microstructure is nothing else but the structural characteristic at a certain stage of this evolution.
论证了所谓粒状贝氏体组织实际上是这种演化过程的阶段性组织特征。
The microstructure evolution in HAZ of Welds is a complex procedure, which associates with many factors.
焊接热影响区微观结构演化与诸多因素密切相关,是一个复杂的过程。
The cellular automata(CA) model with dynamic recrystallization(DRX) is proposed and used to investigate the flow behavior and microstructure evolution during hot compression of AZ91 alloy.
采用基于动态再结晶的元胞自动机模型模拟分析AZ91镁合金热压缩过程中的流变行为及组织演变。
The relation of microstructure evolution vs undercooling in Ni-Si eutectic alloy was systematically investigated.
系统研究了该合金的微观组织演化与熔体过冷度之间的关系。
We get the conclusion that the microstructure evolution of electrolytic copper powder and atomizing copper powder was different in SPS process.
得到电解铜粉和雾化铜粉在SPS烧结过程中显微组织演变特征和规律不同的结论。
This paper introduces an advanced model of coherent precipitation kinetic as well as the development of computer simulation for the microstructure evolution of Ni-based alloys.
介绍了一种先进的共格沉淀动力学模型,以及运用计算机对镍基合金共格沉淀过程组织演化模拟取得的进展。
The importance of numerical simulation of microstructure evolution during metal hot forging was introduced in this paper.
阐述了金属材料塑性加工中微观组织演变数值模拟的重要性。
Pretreatment condition, i. e. cold or hot deformation, has important effects on microstructure evolution, and deformation of samples is a necessary step in SIMA process.
冷、热变形预处理条件对组织演变产生一定的影响,给试样施加变形是SIMA工艺的必要步骤。
The microstructure evolution and partially remelting processing of two-phase-region casting AZ91D magnesium alloy ingots were investigated.
对在两相区铸造进行半固态制浆所得az91 D镁合金坯料的部分重熔工艺条件及组织演变进行了研究。
By integrating the thermomechanical coupled FEM with mathematical model of microstructure evolution, the paper proposes a numerical prediction method for microstructure during hot deformation.
将热力耦合有限元方法与金属微观组织演变数学模型相结合,提出了热变形过程微观组织的数值预报方法。
The effect of elasticity on the microstructure evolution of alloys containing coherent precipitates was studied by phase field model.
采用相场模型对共格沉淀析出过程微观结构演化进行模拟研究。
Evolution of pore morphology and cell wall microstructure of aluminum foam during powder metallurgical foaming was studied.
研究了粉末冶金法制备泡沫铝时泡沫孔结构及胞壁微观组织变化的规律。
The results indicate that macro-microcosmic coupling method is efficient and feasible for simulating the microstructure evolution and effects of variables on microstructure formation.
模拟结果表明,采用宏微观耦合的方法模拟热型连铸过程中微观组织的演化过程以及各种工艺参数对组织形成的影响是有效、可行的。
The regularity of the microstructure evolution during the alloy heat treated at different conditions is investigated by the analysis of finite element method.
利用有限元方法对热处理期间的组织演化进行了分析;
The microstructure evolution of ZL111 by heat holding above the liquidus temperatures was investigated.
对ZL 111铝合金在近液相线的温度保温后的铸态组织进行了研究。
Microstructure evolution and the relationship between microstructure and mechanical properties of Q235 steel were studied by thermal simulation and industrial tests.
通过热模拟试验和工业性试验,研究了Q235钢微观组织演变规律及其与力学性能的关系。
The microstructure evolution and properties transform of 70 steel wires in cold drawing were studied.
研究了冷拉70钢的组织演变和性能变化。
The microstructure evolution of AZ91D magnesium alloy semisolid slurry in the SIMA process was investigated, and the influencing factors on spherical microstructure evolution were analyzed.
研究了大体积az91 D镁合金在SIMA法制备半固态浆料过程中组织的演变规律,并对半固态组织球状化演变的影响因素进行了分析。
After an actual rolling process of 2050 mill was simulated by using the model, evolution laws of strain field, temperature field and microstructure were analyzed.
运用该模型对2050现场实际轧制过程进行模拟计算,分析了轧制过程轧件变形场、温度场及显微组织的演变规律。
The microstructure evolution of pearlitic steel in ECAP was investigated by means of transmission electron microscope and scanning electron microscope.
并用透射电镜、扫描电镜研究了珠光体组织的演变特点和渗碳体的变形。
Subroutines of non-quenched steel microstructure evolution are exploited, and structure property variable regular of non-quenched steel during RSM process is exploited.
开发了非调钢组织演变子程序,研究了非调钢在减定径机组轧制过程中组织性能的变化规律。
Special attention was paid on the microstructure evolution and mechanical properties of the ECAP samples. Deformation twins were found in most grains after the first and second pass of ECAP.
文中主要研究了工业纯钛在室温下进行ECAP多道次变形的组织结构演变,并测试了变形试样的力学性能。
应用推荐