Thanks to its Ethernet card, you can link straight into your network at the office.
多亏有它的以太网卡，你能在办公室直接连入网络。
Let's also configure an Ethernet card.
我们来配置一个以太网卡。
Using LinuxConf to configure your Ethernet card.
使用LinuxConf来配置以太网卡。
This line indicates whether the Ethernet card is working properly.
这一行显示网卡是否正确工作。
Compatible modem, Ethernet card, sound card or other PCI card.
兼容的调制解调器，以太网卡，声卡或其他PCI卡。
Next, click the Adaptor 1 tab, which displays your Ethernet card settings.
然后点击Adaptor1，将会显示你的网卡设置。
Configure an alias return address on Load Balancer (using Ethernet card 0).
在负载均衡器(使用以太网卡0)上配置一个别名返回地址。
You would normally configure each Ethernet card with a physical unit number.
在一般情况下，会为每块以太网卡配置一个物理单元号。
The code is a simple if obtuse method of approximating the load on your Ethernet card.
如果obtuse方法接近网卡的负载，则这段代码是简单的。
Configure the NFA to the network interface card (configure an alias using Ethernet card 0).
配置NFA到网络接口卡(使用以太网卡0配置一个别名)。
For the VIO Server, you must allocate at least one storage controller and one Ethernet card.
对于该VIOServer，您必须至少分配一个存储控制器和一个以太网卡。
If the network Settings are correct, there is probably a defect in the Ethernet card itself.
如果网络设置是正确的，则可能网卡本身有问题。
For net device, type eth0, which represents the first Ethernet card located inside the computer.
在netdevice处，填入eth0。其中，eth0表示这台计算机里面的第一块网卡。
It has a 10 gigabit Ethernet card for high-speed, low-latency communication between members and CFs.
它有一个 10 千兆以太网卡用于成员与 CF之间的高速低延迟通信。
For example, if a bad Ethernet card, and can be replaced without the need to obtain a new IP address.
例如，如果一个以太网卡坏了，可以被更换，而无须取得一个新的IP地址。
In this configuration, a single 10 gigabit Ethernet card (MT 26448 with 2ports) is attached to each node in the cluster.
在该配置中，一个10千兆以太网卡(带有两个端口的MT 26448)连接到集群中的每个节点。
If the Kudzu program detects an Ethernet card, then this an indication that the card was not properly configured the first time around.
如果Kudzu程序检测到一块网卡，这就意味着在前面过程中没有正确配置这块网卡。
Next, you should see another dialog box that displays the brand name for the installed Ethernet card. Press Enter again to continue.
接着，在另外一个对话框中选择所安装网卡的商标名，并按enter键继续。
On both Linux and Solaris, you can create multiple virtual interfaces to IP addresses on different subnets on one physical ethernet card.
在Linux和Solaris 系统上，可以在一块物理以太网卡上创建多个虚拟接口，让它们连接到不同子网上的IP地址。
In order to verify this, consult the manufacturer of the Ethernet card or a computer technician to determine whether or not the card is defective.
为了验证这一点，可以咨询网卡的生产商或一个计算机专家，来判断该网卡是否有缺陷。
It captures the data passing through your dial-up connection or network Ethernet card, analyzes the data and represents it in a readable form.
它捕获的数据，通过您的拨号连接或通过网络以太网卡，分析数据，代表了一个可读的形式。
In this paper we present a real-time network architecture based on Ethernet card and describe how to implement it on transport layer in detail.
本文给出了一种基于以太网卡的实时网络的体系结构，并详细描述了在传输层如何实现数据传输的时间确定性。
If compatibility is not a problem, check the computer has the latest drivers for the various devices attached to it-especially the Wi-Fi or Ethernet card.
若兼容性不成问题，请检查与电脑相连的设备是否有最新的驱动程序——特别是无线或以太网卡。
They would be ideal candidates for using the VIO Server since each of them would not completely utilize the full capacity of an Ethernet card or disk controller (see Figure 3).
它们就是使用VIOServer的理想候选LPAR，因为其中每个LPAR都不会完全利用以太网卡或磁盘控制器的全部容量(请参见图3)。
To add an additional IP alias to an Ethernet card that's already configured, you configure an interface with the same physical unit number but qualify it with a logical unit number.
要想在已经配置的以太网卡上添加额外的ip别名，应该为一个接口配置同样的物理单元号，但是要用一个逻辑单元号来限定它。
The current model for stateless address autoconfiguration USES the MAC address of the device (in other words, an Ethernet card or mobile phone) to formulate the prefix of the 128-bit IPv6 address.
当前的无国界的地址自动配置模式是使用设备(换句话说，是以太网卡或者移动电话)的MAC地址来形式化128位IPv6地址的前缀。
It has Compact Flash (CF) and Secure Digital (SD) slots and can support non-storage devices such as an 802.11b wireless CF card or an Ethernet adapter.
它还有CF (CompactFlash)和SD (SecureDigital)插槽，可以支持非存储设备，例如802.11b无线cf卡或以太网适配器。
It boots from the microSD card with no flash memory and hosts new interfaces, including a DB-9 serial connector, integrated 4-port Universal serial Bus (USB) hub, and integrated Ethernet port.
它没有闪存从microsd卡引导，但是有很多新接口，包括一个DB - 9系列的连接器、集成4个端口的UniversalSerialBus (usb)总线、以及集成的Ethernet端口。
The interface itself is a bridge (br0), using DHCP for configuration, bridging between eth0 (the first Ethernet) and wlan0 (our wireless card).
接口本身是网桥(br0)，使用dhcp进行配置，在eth0(第一块以太网卡)和wlan0(我们的无线网卡)之间起桥接作用。
The interface itself is a bridge (br0), using DHCP for configuration, bridging between eth0 (the first Ethernet) and wlan0 (our wireless card).
接口本身是网桥(br0)，使用dhcp进行配置，在eth0(第一块以太网卡)和wlan0(我们的无线网卡)之间起桥接作用。
应用推荐