The method is expected to produce a single estimate, usually after feasibility analysis and requirements gathering activities.
这个方法通常在可行性分析和收集需求活动以后产生单一的评估。
In this paper, the theory and method of fuzzy time series analysis are presented, the model form and the parameters estimate problem are studied.
本文提出了模糊时间序列分析的理论和方法，研究了模型形式及其参数估计问题。
Existing temporal component extraction method USES multiple regression analysis (MRA) after the application of temporal PCA to estimate the amplitude of resultant components and thus made it up.
现有的时间成分提取法在进行时间pca之后，利用重回归分析来估计成分的波形和振幅，从而弥补了这一缺陷。
The thought of this paper is to discuss on and analysis to dynamic response of HSMS under impact load, and estimate its mean life based on noted stress fatigue design method.
本文的主导思想是讨沦和分析冲击载荷下螺旋弹簧质量系统的动态响应，并应用名义应力疲劳设计方法估计其平均寿命。
The creation of economic analysis method of law provides us a new Angle of view to learn and estimate law.
法律经济学分析方法的产生，为我们认识和评价法律提供了新的视角。
This paper also discusses a circuit parameter estimate method based on mixed-signal circuit performance analysis.
本文给出了一种基于混合电路性能分析的电路参数估计的方法。
Using this method engineers are able to estimate the errors of structural natural frequencies caused by random structural parameters in finite element analysis.
用有限元方法分析结构固有频率时，利用这个方法能正确估计由于结构参数的随机性而产生的误差。
A quantitative characterization method instead of qualitative ocular estimate about uniformity of cells in aluminum foams was put forward based on the digital image processing and analysis technology.
基于数字图像处理与分析技术，提出一种可取代目测这种定性评价泡沫铝中泡体均匀性的定量表征方法。
For solving the linear system with the iterative method, it is very important to estimate the spectral radius of the iterative matrices and give the convergence analysis.
在用迭代法求解线性方程组时，迭代矩阵的谱半径估计及其收敛性分析是非常重要的。
The method to estimate typical weather day is discussed by statistics and analysis on the basis of meteorological data.
对某地区多年气象资料进行统计和分析，给出大气环境影响评价中典型气象日的确定方法。
No matter which method you adopt, the index a nd standard of the risk estimate will be all important issues quantifying and se mi-quantifying engineering risk analysis.
在对工程进行量化和半量化风险分析时，无论采用什么方法，风险评价指标和评价标准都是关键的重要问题。
The method to estimate typical weather day is discussed and given by statistics and analysis on the basic meteorological data.
对某地区的基本气象资料进行统计和分析，讨论并给出大气环境影响评价中典型气象日的确定方法。
Conclusion the maximum likelihood method based on MCECM algorithm can be used to estimate the parameters of non-linear factor analysis model.
结论基于MCECM算法的极大似然估计方法可用于估计非线性因子分析模型的参数。
The thesis based on random fractal theory, utilizing fractional Brownian motion model, using R/S analysis technique and wavelet transform method to estimate Hurst exponent which dep.
基于随机分形理论，采用分数布朗运动模型，应用R/S分析技术和基于小波变换的谱参数估计方法计算地震道信号的赫斯特指数。
According to the results of this re search, digital baseline estimation method can estimate baseline optimally, and it is very suitable to be used in digital multi-channel pulse height analysis.
研究结果表明，数字基线估计方法能实现最佳基线估计，特别适于在数字化多道脉冲幅度分析中使用。
A novel initial rotor position estimate method is proposed on the surface mounted permanent magnet synchronous motor (PMSM), which is based on the PMSM de-coupled model analysis.
针对表面安装式永磁同步电机，给出了电机解耦模型，分析了电枢绕组的电感饱和效应，提出了一种判断初始转子位置的综合性方法。
According to the normal law, we put forward an estimate method of the measuring result uncertainty for Spectrum Analyser. It is useful for uncertainty analysis of other calibrations.
本文根据正态分布的规律，提出了对频谱分析仪参考电平测量结果扩展不确定度的一种估计方法，对其他计量测试项目的不确定度分析有一定参考价值。
Because failure effects in the FMEA analysis table are ambiguous and difficult to effectively estimate, Fuzzy evaluation method is proposed.
针对FMEA分析表中失效影响存在较大模糊性而难以有效估计的特点，引入模糊评估方法来进行分析。
On the basis of regression analysis, a method is advanced which can estimate quality of feed according to amount of seed distributed.
在对数据作进一步回归分析的基础上，本文建立了一套“由排种粒数预测排种质量”的方法。
The paper set forth the analysis of risk, estimate and forecast demolition blasting in using method of fault tree analysis in safety system project, so can find the method of forecast accident.
阐述利用安全系统工程的事故树方法分析、评价、预测拆除爆破的风险，找出预防事故的途径。
This method can also be used to estimate the reliability of finite element analysis and dynamic design of automotive structures.
这个方法也可用于估计有限元分析和汽车结构动力学设计的可靠性。
In this paper the error analysis is conducted. It presents a least side length weight inverse method of traverse for minimum norm estimate without iteration.
本文进行误差分析。提出一个不需要迭代的最小范数估计的导线最小侧边权逆法。
The equation for resistance estimate for different dead rise angles is obtained by the regression analysis method.
由回归分析方法给出了不同斜升角情况下的阻力估算式。
Reliability design is a kind of new design method. It has been found applications in many aspects, such as structure design, strength analysis, life estimate, and fracture safety analysis, etc.
可靠性设计是一种新的设计方法。这种方法在许多方面得到应用，如结构设计、强度分析、寿命估算和断裂安全分析等。
Analysis and examples show that using this method to estimate the approximate coordinates, the accuracy is obviously improved comparing with the approximate coordinates provided by GPS.
理论分析和实例表明，该方法确定的运动载体近似坐标与GPS绝对定位提供的近似坐标相比，精度有明显的提高。
An analysis and design of the whole procedure of construction engineering estimate is made by using software engineering method.
从软件工程的角度对建筑工程概预算的全过程进行了工程化分析与设计。
Considering the flaw of history simulation method, the paper adopts kernel estimation method to estimate parameters and their standard deviation, and then gives case analysis.
考虑到传统的历史模拟方法存在的缺点，采用基于核估计的历史模拟方法获得估计值及其置信区间，并用实例进行了分析。
Then the model of series spring is used to estimate the isolator parameters and the method of nonlinear dynamic history analysis is used for detail design.
随之，建立串联弹簧模型理论用于初步确定隔震垫参数，再使用非线性动力时程分析法进行详细设计。
Relationship analysis method of gray system theory was adopted to compare and estimate municipal noise pollution situation in this paper.
采用灰色系统理论的关联分析法，对城市噪声污染状况进行综合比较评价。
In this paper, we analysis signal model of multi-path environment, and use high order cumulant method, together with some general DOA estimating method, to estimate DOA of multi-path accurately.
本文针对多径的影响，分析了多径情况下的信号模型，并采用基于高阶累积量的方法来解决多径情况下的DOA估计。
应用推荐