Also discusses the oblique error measurement method of dial instrument.
本文还讨论了指针式仪表倾斜误差自动测量方法。
The experiment results show that this method can decrease the influence of measurement error on identifying precision and improve balance precision.
结果表明该方法能有效抑制测量误差的影响，提高识别与平衡精度。
The method which sensor error is compensated with the artifical neural network algorithms is applied to the hydraulic measurement technique.
论文将基于神经网络算法补偿传感器测量误差的方法，应用到水利测量技术中。
The error have been analyzed and estimated in detail and the method to raise accuracy of measurement have been discussed.
详细分析与估计了系统的测量误差并探索了提高准确度的方法。
Applying this method to dynamic weighing for automobile, practice indicates the dynamic measurement result is not in accord with the static measurement result, with an error below 1.5%.
将此方法应用于某公路动态汽车衡的开发，安装路试表明，动态测量与静态称重的吻合度控制于1.5%以内。
This paper discusses a method to separate -measurement result from systematic error and random error by processing dynamic measurement data.
本文通过动态测试数据处理来分离测量结果、系统误差和随机误差。
The cost is high and the error is big in volumetric flow measurement method and velocity measurement.
容积式流量测量方法和速度式流量测量方法存在费用高，误差大的缺点。
By this method the sensor drift can be detected accurately and the measurement error caused by sensor drift may be corrected at the same time.
该方法能够对传感器漂移故障做出判定，同时可实现测量误差的修正。
Principle, method and apparatus for young's modulus measurement of metallic material by indentation method are reviewed, and the methods error is analysed.
综述了无破坏法测定金属杨氏模量的测定原理、测定方法和测定仪器，并对这种测定方法进行了误差分析。
A digital measurement method for machine spindle rotary error with supper computer was presented.
提出了一种计算机控制的机床主轴回转误差的数字测量法。
After estimation of the after-effect time using tracking measurement trajectory data, a method is proposed to analyze after-effect error.
本文提出了一种利用外测弹道数据特性判断后效段时间，进行后效误差分析的方法。
According to the principle of two-hydrophone method for intensity measurement, the error analysis is done.
根据双水听器测量声强法原理进行了误差分析，提出了该双水听器声强测量系统的校准方法。
Based on the measurement process and learning of measuring error, a novel method evaluate the static characteristics of the nonlinear transducer by using the limit point.
基于对测量过程、测量误差的认识，提出了一种利用极限点法的评估非线性传感器静态特性的一种新方法。
Experimental results demonstrate that the proposed vision measurement method of the lateral deviation error can achieve the cm-level accuracy on the general road under the condition of near view.
实车试验表明横向偏差的视觉测量方法在近视野情况下对于一般路面可以取得厘米级的测量精度。
To compensate of the nonlinearity error of heterodyne interferometers in nanometer measurement, a method for reducing the first harmonic nonlinearity is proposed.
为了补偿激光外差干涉纳米测量中的非线性误差，提出了一种减小非线性误差的一次谐波方法。
This paperintroduces an error transmission method for analyzing the error of indirect measurement, and puts forward another analysis method—function increment method.
介绍了对间接测量量进行误差分析的误差传递法，并提出了另一种分析方法——函数增量法。
A high performance measurement of initial phase via a Dual Interpolated DFT method based on error information is presented.
提出了一种基于误差知识的二重插值DFT方法用于高精度时钟初相测量。
Research on the method for estimating the uncertainty of measurement results of form error is one important subject in the field of metrology and measuring error theory.
研究形状误差测量结果的不确定度的估计方法是计量学和测量误差理论中的重要课题之一。
The measurement principle and method of run out error by laser are introduced, and error is analyzed.
介绍了用激光测量跳动误差的测量原理、测量方法，并进行了误差分析。
Based on the attributes of different errors, the method for transferring miss distance measurement error in servo control system is given.
在考虑不同误差属性的基础上，给出了脱靶量测量误差在伺服控制系统中的传递方法。
To overcome the shortcomings of traditional measurement methods for lateral deviation error, a new measurement method based on machine vision is proposed.
针对横向偏差传统测量手段的不足，提出了一种智能车辆横向偏差的视觉测量方法。
Neural network method is discussed and applied to error decomposition theory of dynamic measurement.
在讨论神经网络方法的基础上，尝试将其应用于动态测量误差分解理论。
This paper discussed the error in the measurement of noise figure—The method of Y factor , The error is caused by mismatch of RF attenuater and IF attenuater and the others in the measurement system.
本文讨论了常用的噪声系数测试方法—Y因子法中高频及中频衰减器本身失配和测试系统中其它部分的影响所造成的测试误差。
Based on the measurement process and learning of measuring error, a novel method of using the limit point to evaluate the static characteristics of the nonlinear transducer is presented.
基于对测量过程、测量误差的认识，提出了一种利用极限点法评估非线性传感器静态特性的一种新方法。
The mechanical process is analyzed by using method of mechanical impedance and the measurement error equations are given.
利用机械阻抗方法分析这类传感器工作的力学过程，给出压电式传感器的测量误差表达式。
Error analysis showed that the measurement error is usually less than 10% for low void fraction flow. So this is a lowcost and accurate measurement method.
误差分析表明，这种测量方法在低空泡率条件下测量误差一般不超过10 %，它是一种低成本、高精度的绝对测量方法。
Describes the principle of the horizontal radial off-center instrument and adjustment method of its sensitivity. Explains measurement method and error analysis.
介绍了下卧式径向偏心仪的结构原理及其灵敏度的调整方法，说明了径向偏心位置的测定方法及误差分析。
The measurement method and error analysis method of GRIN lens focal spot diameter in IR wavelength are described.
主要介绍GRIN透镜在红外波段聚焦光斑直径的测量方法及误差分析。
With the help of computer technology, error theory and data processing method, software was developed to deal with data measurement and data processing and a way was found to remove measurement error.
应用计算机软件技术、误差理论及数据处理技术，完成了测量及数据处理系统软件编制，得到了有效消除工件表面测量误差的方法。
At the same time, combine with the measure method of gear measuring center and the character of hourglass worm the method of error measurement is fixed.
同时结合齿轮测量中心的测量方式和环面蜗杆的特点，确定了对环面蜗杆误差项目的测量方法，并分析了测量时的运动控制策略。
应用推荐