The microstructure of the coating was studied by XRD, SEM, EDS and EPMA.
通过XRD、SEM、EDS和EPMA等检测手段对涂层的微观组织进行研究。
The microstructure of a Al Si eutectic alloy has been investigated by TEM, SEM and EPMA.
观察分析了铝硅二元共晶合金的显微结构。
The characteristics of so-called silicon diffusion layer were analyzed through EPMA and hardness test.
通过成分分析(EPMA)和硬度测试, 分析了硅扩散层的特征。
Their occurrence, chemical composition and structure were analyzed by EPMA, Mossbauer and other techniques.
本文对它们的产状、成分和结构进行了研究。
The surface morphology and composition of the conversion film are observed and analyzed respectively by EPMA .
利用电子探针测定转化膜的表面形貌及化学成分。
Surfaces of corroded specimens have been examined by means of metallography, X-ray diffraction analysis, EPMA, SEM, etc.
并用金相、X -线衍射分析、电子探针、扫描电镜等方法对试验后样品的腐蚀表面进行了观察研究。
Its ore minerals were systematically studied on the basis of thin section and polished section microscope observation and EPMA.
本文在详细的光、薄片鉴定和电子探针分析的基础上,首次对其矿石矿物进行了系统的研究。
The speciation of silver in the lead concentrates were analyzed by means of optical microscope and electron probe micro-analyser (EPMA).
利用光学显微镜、电子探针对铅精矿中银的赋存状态进行了分析。
The failure mechanism of lead bronze shaft sleeves with many pits on their internal surface is analyzed by optical metallograph and EPMA.
利用光学金相和电子探针等分析手段,对铅青铜轴套内表面出现凹坑及碎粒造成的磨损失效进行了分析。
This paper introduces the work about the hardware and the software in renewing the process computer for the EPMA (Electronic Probe Microanalyzer).
本文介绍了电子探针过程计算机更新所涉及的硬件和软件方面的工作。
The structure of spheroidal carbide in wear resistant white iron was investigated by SEM observation and EPMA of ion etched metallographic specimen.
用离子蚀刻加扫描电镜观察和微区成分分析的方法研究了耐磨白口铁中球形碳化物的结构。
The composition, microstructure, and hardness of the ceramal layer were analysed with the help of EPMA, XRD and a microhardness measuring instrument.
借助EPMA,XRD和显微硬度计测定了熔覆涂层的化学成份、显微组织和显微硬度。
Microstructure characteristics and mechanical properties of lap joints were researched by SEM, EPMA, EDS, micro-hardness tester and tensile experiment machine.
通过SEM、EPMA、EDS、显微硬度计和拉伸实验机对搭接接头的微观组织及力学性能进行了研究。
The structure, microhardness change and element change in the zone of bonding interface were studied by means of metallograph, SEM, microhardness and EPMA, etc.
采用金相、扫描电镜、显微硬度及电子探针显微分析等手段对结合界面区域的组织结构、显微硬度变化及元素扩散进行了研究。
The microstructures, inclusions and of steels before and after diffusion annealing was compared by means of microscope and electron probe micro-analyzer (EPMA).
利用金相显微镜和电子探针分析了扩散退火前后碳钢的金相组织、夹杂物和磷偏析的变化情况。
The mineral character, the mineral arisen sequence and the relation of mineral intergrowth are studied by mineralogy, chalcography, chymic analysis and EPMA, etc.
利用矿相学、化学分析和电子探针技术等对该矿床矿物特征、矿物生成顺序及共生关系进行研究、探讨。
The worn surface and sub-sarface. of both composite and its base alloy were examined by SEM and EPMA with special attention on the materials transfer and the wear mechanism.
借助SEM及EPMA等手段对磨损表面及亚表面和粘着磨损的材料转移情况进行了观察和分析,并对磨损机制进行了讨论。
By employing EPMA and SEM techniques we examined the compositions of nucleus, cell-walls and cells of wood-cytoplasm in chalcocite and digenite and the shapes of wood cells.
运用EPMA和SEM分析技术对辉铜矿和蓝辉铜矿木质细胞体的细胞核、细胞壁和细胞之间的成分变化、多种环境下的木质细胞形状进行了研究,对形成机理作了探讨。
Morphology and chemical composition of fly ash residues of pozzolanic reaction were investigated by scanning electron microscopy (SEM) and electron probe microanalysis (EPMA).
采用扫描电镜和电子探针等分析手段研究了粉煤灰火山灰反应残渣的形貌和化学组成。
The effects of RE compound modificator on the mechanical properties and microstructure of high carbon high speed steel used for roller ring were investigated by SEM, EDS and EPMA.
通过扫描电镜、能谱分析仪和电子探针研究了稀土复合变质剂对离心铸造的高碳高速钢轧辊组织和力学性能的影响。
The structure of the molecular sieves is studied by means of X-ray diffraction, XPS, EPMA and IR spectrometry, and the unit cell parameters are measured with step scanning technique.
用X射线衍射、X射线光电子能谱、X射线电子探针、红外光谱等方法对分子筛进行了结构研究,并用阶梯扫描方法测得其晶胞参数。
The pitting propagation rate was evaluated by simulating occluded corrosion cell (SOCC), and corrosive characteristic of pits was studied by scanning electro microscopy (SEM) and EPMA.
通过模拟闭塞腐蚀电池试验研究了钢在热处理前后的点蚀扩展速度,并利用电子探针和扫描电镜分析了钢表面的蚀坑形貌。
The cross section morphology and skin-core structure of PAN fiber in wet-spinning are analyzed by the means of electron probe microanalyser (EPMA) and scanning electron microscope (SEM).
利用电子探针、扫描电镜研究了聚丙烯腈在湿法纺丝工艺中的横截面形貌与皮芯结构。
The cross section morphology and skin-core structure of PAN fiber in wet-spinning are analyzed by the means of electron probe microanalyser (EPMA) and scanning electron microscope (SEM).
结果表明凝固浴温度会影响初生纤维的横截面形貌与芯部结构。
By research with electro-probe microanalyzer(EPMA), we found that the surface density and the interface combination status of the coating is the key factors that effect its anti-oxidation.
利用电子探针及透射电镜研究发现,涂层的表面致密化程度和界面结合情况是影响其抗氧化性的关键因素。
Phases constitution, microstructure and element distribution of the coating were studied by X-ray diffraction(XRD), scanning electron microscope(SEM) and electron probe microanalysis(EPMA).
通过X射线衍射分析(XRD)、扫描电镜(SEM)等观察分析了复合粉涂层表面形貌,分析了表面微裂纹和孔隙的形成过程。
The distributions of composition, phase-and microstructure were examined respectively by using electron probe microanalysis (EPMA), X-ray Diffraction (XRD) and scanning electron microscopy (SEM).
分别用电子探针(EPMA)、X衍射(XRD)和扫描电镜(SEM)查证了其组分、相结构和显微结构的梯度分布。
Methods the spatial distribution of the compositional elements in incipient enamel caries was obtained by spot selection, line and map analyses with electron probe microanalysis technique (EPMA).
方法应用电子探针微区分析(EPMA)技术对初期釉质龋中化学成分的空间分布进行选定微区、线扫描及面扫描分析。
Methods the spatial distribution of the compositional elements in incipient enamel caries was obtained by spot selection, line and map analyses with electron probe microanalysis technique (EPMA).
方法应用电子探针微区分析(EPMA)技术对初期釉质龋中化学成分的空间分布进行选定微区、线扫描及面扫描分析。
应用推荐