Office2PDM and EPDM Dashboard are SolidWorks Partner Products, offering one of the highest levels of integration for access to the Enterprise PDM system.
Office2PDM和EPDM报表都是SolidWorks的合作产品，为访问企业版pdm系统提供高水平的集成。
Do not install EPDM liner in compressed air lines.
不要在压缩空气管道内安装EPDM衬垫。
The EPDM was vulcanized by reaction extrusion moulding.
采用反应挤出法对EPDM进行动态硫化。
Compared with diolefine rubber, EPDM has less double bond.
与二烯烃橡胶相比，EPDM的双键很少。
The results showed that SEP had better toughening effect than EPDM.
结果表明，SEP比EPDM具有更好的增韧效果。
Do not use Vaseline or other petroleum - based products on EPDM seats.
在三元乙丙橡胶(EPDM)阀座上不要使用凡士林或其它石油基产品。
But an EPDM diaphragm may be used as a replacement in a PTFE trimmed valve.
但是，一个三元乙丙橡胶隔膜可以用作配置聚四氟乙烯阀内件的阀门的更换件。
A formula of heat-resistance EPDM for food contact application was studied.
研究了耐高温食品级EPDM胶料配方。
The tensile strength and Shore A hardness decreased with EPDM amount increasing.
随着EPDM用量的增加，并用胶的拉伸强度及邵尔A硬度降低；
The results showed that POE was superior to EPDM in processability and toughening.
研究结果表明，POE在加工性、增韧改性等方面比EPDM更具有优势。
Introduces several ways of bonding EPDM membrane laps and carries out cost analyses.
介绍了多种EPDM卷材与卷材接合部位粘贴方法，并进行了成本测算。
Therefore, a PTFE diaphragm cannot be used as a replacement in an EPDM trimmed valve.
因此，一个聚四氟乙烯隔膜不能用作配置三元乙丙橡胶阀内件的阀门的更换件。
The application of the uniform design method to EPDM formulation experiment is described.
介绍了均匀设计法在EPDM配方试验中的应用。
The formulation and processing technology of peroxide vulcanized EPDM foam were investigated.
探讨了采用过氧化物硫化的EPDM发泡材料的配方设计和工艺。
The blend of acrylate rubber (ACM) and ethylene propylene diene terpolymer (EPDM) was prepared.
以丙烯酸酯橡胶(acm)和三元乙丙橡胶(EPDM)为主要原料制备共混材料。
It was found by SEM that the interaction between Mg (OH) 2 and EPDM was improved by adding MAA.
扫描电镜分析表明，MAA的加入增强了氢氧化镁与EPDM之间的相互作用。
Performed the ablation tests of NBR and EPDM insulation on rotating test system using erosive motor.
用烧蚀发动机在旋转实验装置上，对NBR和EPDM绝热层试件进行了烧蚀实验。
One new grade adheres to thermoplastic elastomer (TPE) systems and to existing EPDM rubber profiles.
其中的一个新牌号可粘合到热塑性弹性体(TPE)系统以及现有的EPDM橡胶异型构件上。
Three options for resilient seat materials (EPDM, NBR and FKM) and two packing options are available.
有三种弹性阀座材料（EPDM，NBR和FKM）以及两种密封填料可供选择。
The effect of two kinds of additives(PDM, TAIC)on the properties of EPDM/MVQ blends was investigated.
研究了PDM和TAIC两种助硫化剂对共混胶性能的影响。
The effects of filler fiber and flame retardant on ablative performance of EPDM insulation are studied.
研究了填充纤维、阻燃剂种类及用量对EPDM绝热层耐烧蚀性能的影响。
Furthermore, the stress-strain curves and stress relaxation behavior of EPDM vulcanizates was also studied.
此外，还对EPDM的应力-应变曲线和应力弛豫行为进行了研究。
Dry sealing is achieved by means of pressure balancing principle as it adopts double EPDM rubber sealing strip.
双道三元乙丙胶条，利用压力平衡原理实现干式密封。
This rubber can also be used as modifiers for improving the adhesion properties of some solid rubbers, such as EPDM.
对三元乙丙橡胶具有一定的增粘作用，可作为固体橡胶的改性剂。
PP/ethylene-propylene-diene terpolymer (EPDM) thermoplastic elastomer was prepared by the dynamic photocrosslinking method.
采用动态光交联法制备了PP/EPDM热塑性弹性体。
Heat of the main construction material sealant mainly isobutene polymer, EPDM rubber and thermoplastic styrene block copolymer.
热施工密封胶的主体材料主要是异丁烯类聚合物、三元乙丙橡胶和热塑性的苯乙烯嵌段共聚物。
The course of development of EPDM composite coloured shingle is described with focus on its main materials and self-stick layer.
介绍了EPDM复合彩瓦的研制过程，并对其中的主体材料和自粘层作了详细的论述。
Garden roofs: both our EPDM and TPO membranes are root resistant and fully compatible with different kind of garden roof systems.
花园式屋顶：EPDM及TPO膜都可防止植物根穿透，可与各种花园屋顶兼容。
Garden roofs: both our EPDM and TPO membranes are root resistant and fully compatible with different kind of garden roof systems.
花园式屋顶：EPDM及TPO膜都可防止植物根穿透，可与各种花园屋顶兼容。
应用推荐