Based on the embedded system of ARM, the design scheme of DC motor and stepper motors driving circuits is proposed.
基于ARM嵌入式控制器，提出了供纸系统中直流电动机和步进电动机驱动电路设计方案。
Based on the fully analysis of old system, this paper proposes an entirely new solution which is based on ARM embedded system.
本文在充分分析现有系统的基础上，为变电站防误系统提出了基于ARM嵌入式系统的全新解决方案。
This paper introduces a new type of ultrasonic dental descaler measuring system based on ARM embedded technology.
介绍一种新型的基于ARM嵌入式技术开发的超声洁牙设备检测系统。
This paper introduced a new type of ultrasonics dental descaler measuring system based on ARM embedded technology.
介绍一种新型的基于ARM嵌入式技术开发的超声洁牙机检测系统。
The microprocessor LPC2210 with the ARM kernel is introduced, and the Ethernet-controlled chip RTL8019AS, and the Ethernet interface of the embedded system are designed.
介绍基于ARM内核的微处理器LPC 2210、以太网rtl 8019as芯片的性能，设计了一种基于二者的嵌入式系统以太网接口方案。
This paper introduces the design method of ARM based embedded system, and mainly explains the initialization technique.
本文介绍了基于ARM的嵌入式系统的设计方法，重点讲解了系统的初始化引导技术。
In the embedded system experiment, it is crucial to be familiar with architecture of ARM and embedded operating system.
在嵌入式系统实验中，了解ARM的体系结构、熟悉嵌入式操作系统是关键。
In the paper, it induces the principle of how to choose types of embedded system hardware platform, and mainly compare and analyze different types of ARM processor. It gives example to test.
本文主要介绍嵌入式系统硬件平台的选型原则，并着重对ARM处理器的选型进行分析与比较，同时给出实例进行验证。
This paper interprets the means of the development of the preset unit of TCSC Test Controller with ARM microprocessor, embedded real time operating system and the USB technique.
本文采用ARM处理器技术、嵌入式实时操作系统技术和通用串行总线(usb)技术来完成TCSC实验系统控制器前置单元的实际开发。
System of locomotive bearing fault diagnosis based on ARM embedded System was introduced.
介绍一种基于ARM嵌入式系统和机车轴承诊断系统。
The embedded test system is designed based on ARM micro-controller according to the integration of bionic navigation system.
针对仿生导航系统集成化的需要，设计了基于ARM的嵌入式测试系统。
This paper advance the way of applying the high-end embedded microprocessor chip of AT91RM9200 into the ECG monitor, and design the ECG data acquisition system based on ARM architecture.
本文提出了将高端ARM处理器芯片AT 91rm 9200应用到心电监护仪中，设计了基于ARM体系结构的心电数据采集系统。
It presents the solution that the embedded system based on ARM processor S3C4510B is used to solve the present problems of NC machine tools networking in this thesis.
针对这些问题在论文中提出了利用基于ARM处理器s3c 4510b的嵌入式系统来解决的方案。
This thesis works at the back ground of Autonomous Flight Robot project. Thedesign of Embedded Real-Time System software based on ARM (Advanced RISCMachine) is given.
本文以自主飞行机器人控制系统项目为研究背景，对基于ARM处理器核的嵌入式实时系统软件构造做了分析。
In the microelectronics field, to ARM, DSP, FPGA embedded microprocessors as the representative of the rapid increase performance, provide for the building of the embedded system hardware guarantee.
在微电子领域，以arm、DSP、FPGA为代表的嵌入式微处理器的性能飞速提高，为构建嵌入式系统提供了硬件保证。
This paper is directed against this situation to design a kind of interface system that is ARM processor-based embedded Ethernet.
本文针对这种情况设计了一种基于ARM 处理器的嵌入式以太网接口系统。
The signal processing system embedded kernel apparatus of ARM and DSP.
本嵌入式信号处理系统采用双处理器的结构，核心器件为ARM和DSP。
This paper present the design of an embedded system based on ARM and its application in FMS(Flight Motion Simulation) System.
本文详细介绍了基于ARM构架的嵌入式系统的构建方法及其在飞行转台系统中的应用。
This paper introduces a software and hardware design idea of a FM radio monitoring and receiving machine based on embedded ARM processer and embedded Linux operation system.
本文介绍了一种基于嵌入式arm处理器和嵌入式操作系统Linux的FM广播的监测接收机软硬件设计方法。
The design scheme and realization method of embedded system are presented. ARM was used to communicate data and DSP implemented phase demodulation, and it expanded several interfaces.
提出了一种嵌入式系统设计方案及实现方法，主要通过ARM进行远程数据通信，通过DSP实现解调算法，并扩展了多种输出接口。
In this dissertation, an Embedded Application System Based on ARM S3C2410X is proposed as well as designed. It is connected with the GPS, and realizes the getting information of the position in GPS.
本文提出并研究设计了一种基于ARM处理器s3c 2410x的嵌入式应用系统，完成了系统的整体设计，并实现了GPS系统的连接，获取到了GPS定位信息。
This paper brought forward a design project of robot soccer controller based on embedded system. The hardware of the controller included ARM embedded chip LPC2138 used as main CPU.
本论文首先介绍了机器人小车子系统的设计要求及功能，确定了基于嵌入式系统的足球机器人小车的设计方案。
The paper introduce a design of embedded Ethernet interface which base on ARM microprocessor LPC2106. The paper describe the hardware and software design of this system.
介绍了一种以ARM微处理器LPC2106为核心的嵌入式以太网接口设计方法。
Embedded system based on ARM microprocessor has been widely used. By adopting the modularization design method of embedded system, it can shorten the development cycle and reduce development costs.
基于ARM微处理器的嵌入式系统已经得到了广泛应用，通过采用嵌入式系统的模块化设计方法，可以缩短研发周期和降低开发成本。
This paper analyzes the application of ARM microprocessor in a gateway of embedded remote measurement and control system, elaborates on the design method about software and hardware of this gateway.
分析了ARM微处理器在嵌入式远程测控系统网关中的应用，重点阐述了网关软、硬件的设计方法。
Based on the analysis of construction and function of the system, the project proposes a design of an embedded control system based on ARM and CPLD for the embroidery machine.
本论文在对电脑绣花机系统的结构和功能进行分析的基础上，提出了一个以ARM微处理器和CPLD器件为中心构建硬件平台的绣花机控制系统解决方案。
Embedded system based on ARM is composed of MCU, memory, JTAG circuit and power supply.
基于ARM的嵌入式系统的核心部分包括处理器、存储器、JTAG电路和电源部分。
For the widely-used simple UAV system, an embedded Flight-Control system based on ARM processor is presented in this paper. Minimum sensors are hired for the demand of low-cost and universal purpose.
针对目前应用日趋广泛的简单小型无人机系统，本文提出了一种基于ARM嵌入式处理器的控制体系结构，此系统为简化配置的低成本通用系统。
This paper researches a kind of AHRS which consists of high-performance ARM embedded microprocessor and embedded real-time operating system.
本文研究了一种基于ARM内核的高性能的嵌入式微处理器和嵌入式实时操作系统的航向姿态参考系统。
This paper researches a kind of AHRS which consists of high-performance ARM embedded microprocessor and embedded real-time operating system.
本文研究了一种基于ARM内核的高性能的嵌入式微处理器和嵌入式实时操作系统的航向姿态参考系统。
应用推荐