But adding a hypervisor to an embedded system adds flexibility and higher-level capabilities, morphing the embedded device into a new class of system.
但如果向嵌入式系统添加一个虚拟机监控程序，将添加灵活性和一些高级功能，将嵌入式设备转变为一种新型系统。
Another name for the embedded system. This term is usually used during software development, to distinguish the embedded system from the host with which it communicates.
嵌入式系统的另一个名字。这个术语常常在软件开发期间使用，用来区别与嵌入式系统通讯的主机。
Embedded system is the hardware and software system, which has been embedded in the application of product and engineering, and is cored with MCU.
嵌入式系统是指嵌入到各种产品或工程应用中的，以微处理器或微控制器为核心的软硬件系统。
As a software layer between embedded operation system and hardware in embedded system, HAL (hardware Abstraction layer) is a key problem of embedded application.
在嵌入式系统中，硬件抽象层作为嵌入式操作系统和硬件之间的软件层次是嵌入式应用的一个关键问题。
As a kind of important and complicated system software, embedded software development environment is a high-tech, expensive and necessary tool of the modern embedded system.
嵌入式软件开发平台作为一类重要、复杂的系统软件，其技术含量高、价格昂贵，是现代嵌入式系统开发的必备工具环境。
After studying on GUI software research and development of embedded system, a GUI software framework is proposed based on RTOS of embedded system.
在对嵌入式系统GUI软件开发研究的基础上，提出了一种基于嵌入式系统RTOS上GUI的软件框架。
Basing on the condition of hardware and software of embedded control system, the cross-development circulation that is necessary when the programs of embedded system are compiled is built up.
在已经配置的嵌入式控制系统软件和硬件环境的基础上，建立了在嵌入式编程过程中需要使用的交叉开发环境。
First, It introduces the feature of embedded system, then analysis the importance of RTOS in developing embedded system and how to select a proper RTOS.
文章首先介绍了嵌入式系统的基本特点，然后分析了RTOS在嵌入式系统开发中的作用，以及系统设计人员如何为嵌入式系统选择合适的RTOS。
Embedded GUI is a graphic user interface system designed for specific software and hardware equipment or environment in the embedded system.
嵌入式GUI就是在嵌入式系统中为特定的软硬件设备或环境而设计的图形用户界面系统。
To describe the basic theory of medical image processing embedded system, this paper introduces the concepts of medical image processing system and embedded system.
从嵌入式医学影像处理系统的理论基础展开研究，介绍了医学影像处理系统和嵌入式系统的基本概念。
As a result they can remote monitor, control, diagnose and configure embedded system, which endow embedded system with network and intelligence functions.
从而实现对现场设备的远程监测、控制、诊断和配置，实现嵌入式系统网络化、智能化。
Through compare the embedded operating system with general operating system, this paper describes unique characteristic of embedded operating system and its development prospect.
本文通过嵌入式操作系统与通用操作系统的比较，闸述了嵌入式操作系统独有的特点及其发展前景。
The design theory for embedded system hardware and software is expatiated, and the working principle for embedded system remote software upgraded is introduced.
详述了此嵌入式系统硬件和软件的设计思路，并介绍了嵌入式系统实现远程软件升级的工作原理。
Nowadays, the popular embedded GUI system and the various developed embedded GUI systems that are used in the embedded system software, have some problems more or less.
目前流行的嵌入式GUI系统和各种自行开发的嵌入式GUI系统在用于嵌入式系统软件时，或多或少地存在一些问题。
After analysing the real requirement of embedded remote real-time supervisory system, the application system architecture based on embedded database was put forward in the paper.
本文在分析了嵌入式远程实时监控系统的实际需求之后，提出了基于嵌入式数据库的应用系统架构方案。
The article introduces the characteristics of the embedded system and the application status, and compares the embedded hydropower station system with the traditional hydropower station system.
介介绍嵌入式系统的特点及其在水电站中的应用，对嵌入式水电站系统和传统典型水电站系统进行了比较。
The article discusses the application of the embedded system used in the Ethernet interface equipment. It introduces a design theory and method of Embedded intelligent dual-Ethernet system.
讨论了嵌入式系统在网络接口设备中的应用，介绍了一种嵌入式智能双以太网系统的设计原理和方法。
This paper introduces a design of embedded temperature monitoring system which is based on CAN bus, the entire system composes by the embedded controller sub-master and the Master controller.
介绍了一种基于CAN总线的可扩展的嵌入式温度监测系统的设计方法，整个系统由嵌入式分控器和主控器两大部分组成。
In an digital imaging embedded DSP system design, it is necessary to realize the communication between embedded DSP system and PC for its cross-development system and its debug.
在数字成像嵌入式DSP系统开发中，为搭建交叉开发平台，便于系统调试，常常需要实现嵌入式DSP系统与计算机之间的通信功能。
In a digital imaging embedded DSP system design, it is necessary to realize the communication between embedded DSP system and PC for its cross-development system and its debug.
在数字成像嵌入式DSP系统开发中，为搭建交叉开发平台，便于系统调试，常常需要实现嵌入式DSP系统与计算机之间的通信功能。
In the embedded system experiment, it is crucial to be familiar with architecture of ARM and embedded operating system.
在嵌入式系统实验中，了解ARM的体系结构、熟悉嵌入式操作系统是关键。
Windows XP Embedded is a modular embedded operating system for 32-bit portable devices. Detector for orientation direction navigation system uses XPE as its operating system.
是一个适用于32位便携式设备产品的模块化的嵌入式操作系统．定位定向导航系统检测仪就使用了XPE作为操作系统。
An analysis of the current situation of the embedded teaching system is provided and Put forward the improvement project of the embedded teaching system?
本文通过对嵌入式系统教学现状的分析，提出了建立嵌入式系统教学体系的改进方案。
By analyzing factors impacting upon the embedded system performance, an embedded system design method based on thread ideas is used, performance is improved with instruction level parallelism.
通过分析影响嵌入式系统性能的主要因素，采用了基于线程概念的嵌入式系统并行设计方法，利用指令级并行来改善系统性能。
The embedded menu system is one of important components of embedded system providing a friendly and user-friendly interface for users.
嵌入式菜单系统是嵌入式系统的重要组成部分之一，它的目标是为客户提供了一个友好、操作方便的界面。
Embedded operating system is as the kernel and foundation of system as general operating system. Embedded operating system is the root of securing embedded system.
嵌入式操作系统与通用操作系统一样是系统的核心和基石，安全嵌入式操作系统是保障嵌入式系统安全的根本。
This subject has realized an embedded system with WEB SERVER based on ARM chip and embedded operating system.
本课题实现了一个基于ARM芯片和嵌入式操作系统的带有WEBSERVER的嵌入式系统。
An embedded mobile navigation system is essentially a system which integrates the navigation technology and the spatial information technique based on embedded mobile environment.
嵌入式移动导航系统实际上是在嵌入式平台上整合导航定位技术和相关的空间信息技术的一套应用系统。
Hardware platform of embedded robot control system is developed using embedded 32-bit processor LPC2136 based on ARM7 that is the center control system, which supports real time simulation.
以支持实时仿真的32位嵌入式arm7处理器LPC 2136为控制核心，设计开发嵌入式机器人控制系统硬件平台。
Hardware platform of embedded robot control system is developed using embedded 32-bit processor LPC2136 based on ARM7 that is the center control system, which supports real time simulation.
以支持实时仿真的32位嵌入式arm7处理器LPC 2136为控制核心，设计开发嵌入式机器人控制系统硬件平台。
应用推荐