Based on the fully analysis of old system, this paper proposes an entirely new solution which is based on ARM embedded system.
本文在充分分析现有系统的基础上，为变电站防误系统提出了基于ARM嵌入式系统的全新解决方案。
The screen is driven by a computer embedded in the headband, running Windows CE 6.0 on a Texas Instruments OMAP 3530 system-on-on-a-chip, which packs an ARM Cortex 8 core.
这套系统是由集成在头戴式设备内部的电脑来驱动的，采用的SOC芯片是德州仪器的OMAP3530,其内部集成有ARM Cortex8处理器核心.采用的操作系统则是WindowsCE6.0。
System of locomotive bearing fault diagnosis based on ARM embedded System was introduced.
介绍一种基于ARM嵌入式系统和机车轴承诊断系统。
Remap is a very important concept in the ARM embedded software development, it is also a key step in system initialization process.
重映射是ARM嵌入式软件开发中一个非常重要的概念，它是系统初始化过程中一个重要的环节。
This paper introduces a new type of ultrasonic dental descaler measuring system based on ARM embedded technology.
介绍一种新型的基于ARM嵌入式技术开发的超声洁牙设备检测系统。
This paper introduced a new type of ultrasonics dental descaler measuring system based on ARM embedded technology.
介绍一种新型的基于ARM嵌入式技术开发的超声洁牙机检测系统。
To solve the problem, a new embedded machine vision system is proposed, which takes the USB camera as the image acquisition unit and ARM as central processor.
针对此问题，本文设计了一个以USB数码摄像头为图像采集设备、ARM为核心处理器的嵌入式机器视觉系统。
In the paper, it induces the principle of how to choose types of embedded system hardware platform, and mainly compare and analyze different types of ARM processor. It gives example to test.
本文主要介绍嵌入式系统硬件平台的选型原则，并着重对ARM处理器的选型进行分析与比较，同时给出实例进行验证。
The microprocessor LPC2210 with the ARM kernel is introduced, and the Ethernet-controlled chip RTL8019AS, and the Ethernet interface of the embedded system are designed.
介绍基于ARM内核的微处理器LPC 2210、以太网rtl 8019as芯片的性能，设计了一种基于二者的嵌入式系统以太网接口方案。
This paper interprets the means of the development of the preset unit of TCSC Test Controller with ARM microprocessor, embedded real time operating system and the USB technique.
本文采用ARM处理器技术、嵌入式实时操作系统技术和通用串行总线(usb)技术来完成TCSC实验系统控制器前置单元的实际开发。
Methods an ARM embedded system was used to achieve data transmission by implementing serial communication with GPS module, Beidou receiver and wireless digital broadcasting station.
方法：采用ARM嵌入式系统，并与G PS模块、北斗接收机和数传电台进行串口通信，实现数据的传输。
This paper is directed against this situation to design a kind of interface system that is ARM processor-based embedded Ethernet.
本文针对这种情况设计了一种基于ARM 处理器的嵌入式以太网接口系统。
This paper advance the way of applying the high-end embedded microprocessor chip of AT91RM9200 into the ECG monitor, and design the ECG data acquisition system based on ARM architecture.
本文提出了将高端ARM处理器芯片AT 91rm 9200应用到心电监护仪中，设计了基于ARM体系结构的心电数据采集系统。
This paper introduces the design method of ARM based embedded system, and mainly explains the initialization technique.
本文介绍了基于ARM的嵌入式系统的设计方法，重点讲解了系统的初始化引导技术。
This paper analyzes the application of ARM microprocessor in a gateway of embedded remote measurement and control system, elaborates on the design method about software and hardware of this gateway.
分析了ARM微处理器在嵌入式远程测控系统网关中的应用，重点阐述了网关软、硬件的设计方法。
In the embedded system experiment, it is crucial to be familiar with architecture of ARM and embedded operating system.
在嵌入式系统实验中，了解ARM的体系结构、熟悉嵌入式操作系统是关键。
It presents the solution that the embedded system based on ARM processor S3C4510B is used to solve the present problems of NC machine tools networking in this thesis.
针对这些问题在论文中提出了利用基于ARM处理器s3c 4510b的嵌入式系统来解决的方案。
This subject has realized an embedded system with WEB SERVER based on ARM chip and embedded operating system.
本课题实现了一个基于ARM芯片和嵌入式操作系统的带有WEBSERVER的嵌入式系统。
The embedded test system is designed based on ARM micro-controller according to the integration of bionic navigation system.
针对仿生导航系统集成化的需要，设计了基于ARM的嵌入式测试系统。
Embedded system based on ARM is composed of MCU, memory, JTAG circuit and power supply.
基于ARM的嵌入式系统的核心部分包括处理器、存储器、JTAG电路和电源部分。
From the ARM Architecture, we could see that RISC has so many merits in embedded systems. And in the new trend, embedded processors will be widely used in SOC (system On Chip).
同时从ARM体系，我们也可以看到RISC在嵌入式处理器领域的优势所在，以及它们将来必然在SOC(系统芯片)中获得广泛应用。
Against this background, the paper did the research on motor fault analysis system, which is based on ARM embedded microprocessor.
在此背景下，本文进行了基于ARM的嵌入式电机故障诊断系统的研究。
In the microelectronics field, to ARM, DSP, FPGA embedded microprocessors as the representative of the rapid increase performance, provide for the building of the embedded system hardware guarantee.
在微电子领域，以arm、DSP、FPGA为代表的嵌入式微处理器的性能飞速提高，为构建嵌入式系统提供了硬件保证。
This subject has realized an embedded system based on ARM chip.
本课题实现了一个基于ARM芯片的嵌入式系统平台。
The paper introduce a design of embedded Ethernet interface which base on ARM microprocessor LPC2106. The paper describe the hardware and software design of this system.
介绍了一种以ARM微处理器LPC2106为核心的嵌入式以太网接口设计方法。
The design scheme and realization method of embedded system are presented. ARM was used to communicate data and DSP implemented phase demodulation, and it expanded several interfaces.
提出了一种嵌入式系统设计方案及实现方法，主要通过ARM进行远程数据通信，通过DSP实现解调算法，并扩展了多种输出接口。
To resolve these problems above, this paper puts forward a way for large-scale LED lattice screen display system based on ARM embedded.
针对上述问题，提出了一种基于ARM嵌入式的大型LED点阵屏显示系统设计方案。
This paper researches a kind of AHRS which consists of high-performance ARM embedded microprocessor and embedded real-time operating system.
本文研究了一种基于ARM内核的高性能的嵌入式微处理器和嵌入式实时操作系统的航向姿态参考系统。
The signal processing system embedded kernel apparatus of ARM and DSP.
本嵌入式信号处理系统采用双处理器的结构，核心器件为ARM和DSP。
Based on the analysis of construction and function of the system, the project proposes a design of an embedded control system based on ARM and CPLD for the embroidery machine.
本论文在对电脑绣花机系统的结构和功能进行分析的基础上，提出了一个以ARM微处理器和CPLD器件为中心构建硬件平台的绣花机控制系统解决方案。
应用推荐