• The research provides a theoretical base for the fatigue life evaluation of similar materials at elevated temperature.

    得出的结论为在高温条件下相类似材料的疲劳寿命评估提供了理论依据。

    youdao

  • Treatment may be given to reduce the elevated temperature.

    为了降低升高的体温,患者可能要进行一些处理。

    youdao

  • Cobalt - based alloy is a kind of important materials used in elevated temperature.

    钴基合金是一种重要的高温材料。

    youdao

  • Plastic deformation at elevated temperature and processing maps of magnesium alloy;

    并观察了变形后的显微组织,计算分析了该合金的加工图。

    youdao

  • A model of surfactant transport in porous media at elevated temperature was developed.

    本文建立了高温状态下表面活性剂在多孔介质中的运移方程。

    youdao

  • Increased humidity and elevated temperature will reduce available work time and set time.

    湿度和温度增加将使可得的工作时间和凝固时间缩短。

    youdao

  • Casting and curing of concrete at elevated temperature would decrease its compressive strength.

    拌和及养护的温度高,混凝土抗压强度低。

    youdao

  • Applications requiring strength at elevated temperature, e. g. engineering hardware, brake component.

    用于在高温下需要保持强度的铸件,如工程配件,刹车组件。

    youdao

  • The purified precipitate burns at elevated temperature and high pure tungsten trioxide can be obtained.

    通过这一系列过程将钨酸纯化,然后高温灼烧即得高纯三氧化钨。

    youdao

  • The correlation between mechanical behavior of concrete and temperature was analyzed at elevated temperature.

    分析研究了高温作用下混凝土的力学性能与温度之间的关系。

    youdao

  • The two species seedlings respond differently to the combination of elevated temperature and nitrogen addition.

    单独施氮处理也增加了两种幼苗的株高和总生物量。

    youdao

  • The erosion tests at elevated temperature show that coating's erosion behavior is between plasticity and fragility.

    高温冲蚀磨损试验表明,各涂层的冲蚀磨损行为介于塑性与脆性冲蚀之间,并以塑性磨损为主。

    youdao

  • MTC pastes cured at elevated temperature in alkalis environment can yield amount of gelatinous hydrate to solidify mud.

    MT C浆在高温碱性环境中能够生成大量凝胶水化产物,使泥浆固化。

    youdao

  • This powdered mixture is subjected to conditions of elevated temperature and pressure suitable to produce CBN compacts.

    使该粉状组合物经受适合于产生CBN压块的提高的温度和压力条件。

    youdao

  • Deformation behavior at elevated temperature of AZ31B magnesium alloy was studied systematically by processing map theory.

    采用加工图理论系统分析了AZ31 b镁合金在高温变形过程中的变形行为。

    youdao

  • Performance check and trial use in elevated temperature environment indicated that this adhesive has very good properties.

    性能检测和高温环境试用表明,该胶粘剂性能优良。

    youdao

  • In addition, the properties at elevated temperature and service life of the quick-firer steel were analyzed and discussed.

    此外,对新型炮钢高温性能及使用寿命进行了分析和讨论。

    youdao

  • A finite element program CCGC-1 is compiled to simulate the creep crack growth rate in materials working at elevated temperature.

    编制了有限元程序CCGC - 1以模拟计算高温材料蠕变裂纹的扩展。

    youdao

  • The possibility of the application of electroplating-process to self-lubricating Fe-Re alloys at elevated temperature is studied.

    研究了用电镀法制取铁-铼高温自润滑合金的可能性。

    youdao

  • Finally, the fluid flow of the weld pool was taken into account by increasing the heat conduction coefficient at elevated temperature.

    最后采用增大热传导系数的方法,考虑了熔池内流体流动对整个温度场的影响。

    youdao

  • Removal of blocking group at an elevated temperature, using a thermostable enzyme, permits template-specific polynucleotide synthesis.

    然后温度提高时在热稳定酶作用下去除阻断基团,从而进行模板特 异性的多聚核苷酸合成。

    youdao

  • The formation of oxide layer during tensile process at elevated temperature in air suppresses environmental embrittlement for the alloy.

    在拉伸过程中形成的致密氧化铝薄膜能够有效地阻止氧向基体中扩散,减少环境脆性,提高合金的高温塑性。

    youdao

  • A tumor, for example, requires an increased flow of blood to grow, possibly resulting in a slightly elevated temperature around the tumor.

    例如,肿瘤需要血流才能生长,这就会引起肿瘤周围的温度轻微升高。

    youdao

  • In a first embodiment, ion implantation is combined with in situ heat treatment by performing the ion implantation at elevated temperature.

    在第一个实施例中,通过在高温下实施离子注入而使离子注入与原位热处理相结合。

    youdao

  • The rupture mode of the composite at room and elevated temperature depends upon the work-hardening characteristics of the nickel alloy matrix.

    复合材料常温和高温的拉伸断裂模式与基体相的形变强化特性有关。

    youdao

  • In this paper, the performances of elevated temperature low-cycle fatigue and thermal fatigue of two superalloys GH36 and GH132 are discussed.

    本文研究了GH36与GH132两种高温合金的高温低周疲劳和热疲劳性能。

    youdao

  • The process of annealing consists of heating the steel to an elevated temperature for a definite period of time and, usually, cooling it slowly.

    退火工艺的组成为把钢加热到一定温度并保持一段时间,通常再缓慢冷却。

    youdao

  • High-temperature alloys have a high tensile strength at elevated temperature, a good stability and reliability in a large range of temperatures.

    高温合金具有较高的高温强度,在各种温度下具有良好的组织稳定性和使用的可靠性。

    youdao

  • Effective sintering AIDS not only can improve microstructure but also can enhance performances of elevated temperature and oxidation resistance.

    有效的烧结助剂不但可以改善氮化硅陶瓷的显微结构,而且可以提高氮化硅陶瓷的高温性能和抗氧化性能。

    youdao

  • On the basis of experimental facts, a new process of producing copper sulfate by medium acidic air oxidation at elevated temperature was offered.

    在实验基础上,提出了中酸度高温空气氧化法生产硫酸铜的新工艺。

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定