Every successive element of fluid undergoes the throttling process in a continuous stream.
在连续的流动中，每一流体元相继地经历节流过程。
We investigate the flow mechanism of this conveyor in a horizontal configuration by a discrete element method (DEM), applying a periodic boundary and omitting the existence of fluid medium.
我们用离散元(DEM)方法研究了这种运输机在水平配置时的流动机制，施加周期性边界条件并忽略流动介质的存在。
A three element model of lumped parameter in peripheral extra corporeal circulation of an animal has been proposed and set up according to the fluid network theory.
我们运用流体网络理论，建立了三参数单元的侧支体外循环集中参数模型。
Sizing width of an element as a percentage of its height or vice versa in a fluid design?
大小的单元宽度占其高度或反之亦然在流体设计？
According to the basic motion equations of the earth's fluid core, the convection of the fluid core has been simulated by use of Finite Element Method (FEM).
根据地球液核基本运动方程，采用有限元方法对液核流体的对流状态进行了数值模拟。
A new type of passive solar heating element, fluid convective thermic diode with partition, is developed.
对一种新型的太阳能采暖部件——隔板式液体对流二极管进行了实验研究。
The problems of creeping flow of Newtonian fluid extruded from a plane slit or a circular pipe are simulated using several kinds of finite element method.
本文首次成功地将压力不连续的非协调单元和罚函数法用于挤出胀大流动的有限元计算。
The spring element stiffness is related to pre yield shear modulus of MR fluid and accumulator stiffness.
该弹簧单元与磁流变液屈服前区的初始剪切模量和蓄能器的刚度等有关。
When a fluid in the sensing circuit has concentration changes after flowing through the gatherer, the color of the electrochromic element correspondingly changes.
当流经该收集器内、该感测电路中的流体的浓度变化时，则该电致变色元件的颜色随之变化。
For the Non-Newtonian fluid, Finite Element Method (FEM) is used to have an accurate description of the fluid flow details and this result can be used for further reduced-order modeling.
然后针对一类复杂的非牛顿流体，采用有限元方法对其建模分析，得到的结果可以为进一步的简化解析建模提供参考。
In this paper are described first the differential equation and finite element formula for fluid migration under the action of crust stress in a porous rock.
首先叙述了地应力作用下空隙弹性介质中流体运移的基本方程及由基本方程推导的有限元公式。
The two dimensional fluid Reynolds equations were established using the finite element method. The pressure distribution, opening force and upstream pumping rate of spiral groove were obtained.
用有限元数值计算的方法得出了一定条件下螺旋槽上游泵送机械密封端面间液体的压力分布、开启力及上游泵送量等。
This paper presents a boundary element method for coupled motion analysis of fluid and solid.
本文给出了流固偶合运动（包括物体散射辐射及偶合运动）的边界元法理论和应用。
D finite element model for thermal fluids of perforated completion and open hole completion is developed by using thermal fluid field for simulating percolation field in perforated completion.
用热流场模拟射孔完井渗流场，建立了射孔完井热流和裸眼完井热流有限元三维模型。
The utility model discloses a fluid filter with a flow attachment, wherein, the flow attachment provides a unique interface between a filter element and the top of the filter.
本实用新型公开了一种流体过滤器设备，其中，流动附加部件在过滤元件和过滤器顶端之间提供独特的界面。
The steps of fluid finite element numerical calculation were related in detail.
详细叙述流体有限元数值计算的步骤。
The soil consolidation can be simulated by using a finite element numerical model of fluid-solid coupling of fluid seepage in a deformable porous medium.
针对饱和土固结问题，利用可变形多孔介质中流体渗流的流固耦合有限元数值模型，对该问题进行了数值模拟。
Numerical simulations on particle mixing characteristics of spout-fluid bed were carried out in three dimensional based on discrete element method (DEM).
采用离散元方法，对喷动流化床内的颗粒混合特性进行了三维直接数值模拟。
It has been widely used in three-dimensional medical reconstruction, computational dynamic fluid, post-processing of finite element computation, seismic and geological applications.
在医学三维重建、计算流体力学、有限元后处理、地震地质等众多领域得到了广泛应用。
Based on the movement equation of compressible fluid, a time-dependent finite element formula for analysis of hydrodynamic pressure on retaining structure during earthquakes is derived.
根据可压缩流体运动方程，推导建立了求解挡水结构动水压力的时域有限元公式。
Based on theories of computational fluid dynamics and heat transfer, an axial symmetry finite element model of velocity and temperature field of spot welding for aluminum alloy is established.
根据计算流体力学与传热学原理，建立了描述铝合金电阻点焊液态熔核流动行为和传热过程的轴对称有限元模型。
In this numerical model the fluid pressure transmission during the rupture-failure process of material is achieved by the coupling and iteration of flow-damage of an element.
在这个数值模型中，材料在开裂破坏过程中流体压力传递通过单元渗流损伤耦合迭代来实现。
In using absolute filters, all particles larger than the micron rating of the filter element in use will be removed from the treated fluid.
在高纯度过滤器使用过程中，大于滤芯微米额定值的所有颗粒都将从处理液中被去除。
The seismic analysis of liquid storage container is conducted by finite element method for transient dynamic fluid-solid coupling model.
应用流体固体动力耦合统一分析模型的有限元法，进行了储液池的抗震分析。
Based on fluid velocity potential, an ALE finite element formulation for the analysis of nonlinear sloshing problems has been developed.
基于流体速度势，本文导出了非线性晃动问题的ALE有限元格式。
When a structure vibrates in water, large amount of computation will be unavoidable if the fluid finite element method is used to calculate the added water mass matrix and damping matrix.
当结构在静水中振动时，如采用流体有限元来计算流体的附加质量和附加阻尼，势必导致解题规模过大。
The results show that finite element method is suitable for the analysis of non-Newtonian fluid flow with complex geometry.
结果表明有限元法适于分析复杂流场中非牛顿流体的流动。
The mathematical model of fluid percolation and rock deformation of fluid-solid coupling is solved with the finite difference method and the finite element method respectively.
分别采用有限差分法和有限元法对流固耦合流体渗流数学模型与岩石变形数学模型进行了求解。
Finite element method is used to carry on numerical simulation of fluid-structure interaction for the system of TLD, and a verification of the reliability of fluid-structure coupled mode is made.
尝试用有限元分析的方法模拟TLD中流体与结构的耦合作用，并验证了由此方法建立起来的流固耦合模型的可靠性；
Finite element method is used to carry on numerical simulation of fluid-structure interaction for the system of TLD, and a verification of the reliability of fluid-structure coupled mode is made.
尝试用有限元分析的方法模拟TLD中流体与结构的耦合作用，并验证了由此方法建立起来的流固耦合模型的可靠性；
应用推荐