The Contact Series gives a dynamic and sensorial experience to the visually impaired user by adding a tactile element in the form of braille lettering to everyday objects.
盲文生活用具系列通过加入盲文字母在日常物品的可触摸元素，使盲人朋友有一种动态、可触觉的体验。
In this case, it is clear that each contact should be described within a child element of the contacts element.
在这种情况下，很明显，应该在contacts元素的子元素中描述每个联系人。
The ADDRESS element may be used by authors to supply contact information for a document or a major part of a document such as a form.
ADDRESS元素可以被作者用来提供文档或诸如表单这样的文档主要部分的联系信息。
Finally, the flow functions and parametric variables of contact element are discussed.
最后，对接触流动函数及参变量的意义作了详细说明。
It is significant to study the contact area in rolling process and simplify model of finite element.
对研究花键冷滚压成形过程中的接触面积和有限元模型的简化具有重要的意义。
Modeling program of cycloid profile contact finite element was finished by use of parametric function in I-DEAS software.
利用I-DEAS软件本身的参数化设计功能，编写了摆线轮齿面接触有限元建模程序；
Using ABAQUS to build the finite element model of reinforced concrete hollow slab and rubber bearing, simulate contact effect between them by set contact property.
运用有限元软件ABAQUS建立钢筋混凝土桥面板与橡胶支座的有限元模型，设置接触属性来模拟二者之间的接触作用。
The roll separating force, rolling torque and contact pressure along the surface of the rolls are also evaluated by means of the finite element method.
轧制分离力、轧制力矩以及沿轧辊表面的接触压力也通过有限元法进行评估。
By analysis of the middle section stress of the hollow slab in the two situations of consider contact and not consider contact, verified the accuracy of contact finite element model in that situation.
通过考虑接触与不考虑接触两种情况时桥面板跨中截面的受力分析，验证该问题中接触有限元模型的正确性。
In the numerical simulation of relieving residual stress by hammer peening, contact element technique was firstly adopted for establishing the finite model and calculating the hammer peening.
首次在锤击消除焊接应力的数值模拟研究中，采用接触单元技术建立有限元模型模拟计算锤击作用。
Here, contact is replaced by springs whose deformation is used to simulate contact deformation of workpiece and fixture element.
这里采用弹簧边界条件代替接触，模拟工件和夹具元件的接触变形。
An inverse stochastic boundary element method for prediction of contact stress is presented by combining improved filter algorithm with stochastic boundary element method.
将改进的滤波算法和随机边界元法结合，提出了用于预测接触应力的逆随机边界元法。
On the basis of it, the detailed calculation processes are given about the geometric nonlinearity cellular element method and contact nonlinearity cellular element method.
在此基础上，给出几何非线性问题元胞单元法和接触非线性问题元胞单元法较详细的计算步骤。
The experimental result also shows that the nitrogen element on the surface of contact black surface may be mainly in forms of amino group and nitro group.
此外，实验分析了接触法炭黑表面氮元素的组成，结果表明主要是以氨基和硝基的形式存在。
This paper is based on the research of classical contact analysis and Finite Element Method (FEM) contact analysis.
论文对经典接触计算方法与有限元接触问题计算方法进行了对比研究。
A 5-node pseudo element of 3-d elastic contact analysis ws applicable range and concrete practice were also discussed. Its reliability was checked by two examples.
构造了3维5节点接触伪单元以处理固体或壳体接触问题的边界非线性，讨论了其适用的范围和具体应用的情况通过算例，验证了其可靠性。
The finite element method (FEM) of contact theory and eigenvalue computing is used in this thesis to solve the problem of natural modal analyzing aircraft structure with contact surface.
本文采用接触理论有限元数值方法加特征值计算的方法来解决考虑连接面固有特性计算的问题。
In this thesis the generation of orthogonal - aligned - shaft face gear, finite element analysis (fea) of the bend stress and contact stress of the fg drive are studied.
本文主要研究了正交面齿轮的齿面生成、正交面齿轮传动的弯曲应力和接触应力的有限元分析。
Meanwhile, with other engineering concrete examples, the applicability of contact elastoplastic finite element algorithm used to analyze the debris landslide stability was studied.
同时，结合其他工程实例，对弹塑性接触有限元算法在碎石土滑坡稳定性分析中的适用性进行研究。
Thus the finite element method is used to study the duplex nonlinearity (geometric nonlinearity and contact nonlinearity) of the drill string at the well bottom.
针对以上难题，利用有限元法研究了钻柱在井底的二重非线性(几何非线性和接触非线性)问题。
The force and deformation of bottom hole assembly (BHA)are calculated by the gap-element method, in consideration for the bending effect and contact state of BHA.
考虑下部钻具组合的弯曲效应和接触状态，运用间隙无法对下部钻具组合进行了受力变形计算。
The dynamic contact finite element models of standard involute gear and modification gear are established in the software of ANSYS.
在ANSYS软件中建立了标准渐开线齿轮与修形齿轮的动力接触有限元模型。
An iterative process has to be carried out in the boundary element analysis of the contact between elastic roller and rigid plane.
用边界元法分析弹性滚柱与刚性平面的接触问题，需要采用迭代算法。
Bending stresses and contact stresses of the gears were investigated by finite element method in the static analysis.
在齿轮的静力学分析中，利用有限元的方法对齿轮的齿根弯曲应力和齿面接触应力进行了研究。
A general contact algorithm for parallel finite element simulation of dynamic contact problem is presented in this paper.
针对动态接触问题的有限元并行计算，提出了一种新的接触算法。
The contact element analysis of ANSYS is a kind of FEM contact analysis.
而ANSYS中的接触单元分析方法就是一种有限元接触分析方法。
This paper also discussed the practical simplification of complicated structure, the complex modeling method of different kinds of element, and contact analysis problems.
在课题研究中，还探讨了复杂结构的合理简化、多种单元混合建模以及接触分析等问题。
This paper also discussed the practical simplification of complicated structure, the complex modeling method of different kinds of element, and contact analysis problems.
在课题研究中，还探讨了复杂结构的合理简化、多种单元混合建模以及接触分析等问题。
应用推荐