A electromechanical control system which apply on the HL-36 (46) CNC turning-milling complex machine is studied.
研究一种机电控制系统用于HL- 36(46)车铣复合数控机床。
They were first used back in the late 1960s in communications to control electromechanical telephone switches.
它们最初于六十年代晚期在通讯中被用于控制机电电话交换机。
Some vehicles may have an electromechanical steering gear control unit that can malfunction due to a damaged capacitor.
部分车可能有由于一个损坏的电容器引起的机电转向舵传动装置控制单元故障。
The lower system is responsible for the control of operation cycle and displacement of electromechanical system.
最后，由底层系统来实现对机电系统的运行周期和位移的控制。
Due to the Electrorheological (ER) Effect is a kind of remarkable effect, ERF can be widely applied in electromechanical transmission and control systems.
由于具有这种奇特的效应，因而在机电传动与控制系统领域有着广泛应用前景。
Automotive electronic control system is a kind of electromechanical technology integrated micro-electronics technology with sensor technology, and is widely used in automotive industry.
汽车电子控制系统是将微电子和传感器融为一体的机电技术，被日益广泛地应用在汽车上。
The main subject of this dissertation is the research on the control mode of excitation system, which is a subsection of Sanxia Electromechanical Equipment Research.
本论文是基于“三峡机电设备”课题的子课题“励磁系统控制方式的研究”。
And an electromechanical model of piezoelectric actuator is presented to demonstrate that charge-feedback control is prominently effective to reduce hysteresis, creep and to improve linearity.
建立了压电作动器的机电模型，证明了电荷反馈控制对于减小回滞现象、提高线性度有明显的作用。
Synthesis state monitoring, fault diagnosis and control decision is integrated in intelligent self-diagnosis technique, and it is used in self-diagnosis of military electromechanical equipments.
智能自诊断技术集综合状态监控、故障诊断、控制决策技术于一体，用于军用机电设备自诊断。
Firstly, the flexibility model of main drive system of rolling mill is described. The mechanism of electromechanical vibration is set forth based on modern control theory.
首先从机电动力学出发，描述了机电弹性系统模型并以现代控制理论为基础，阐述了机电振动产生的机理。
Based on further analysis of this series of gas burning machines, electronic control proceeding controller, instead of electromechanical proceeding controller, was adopted.
在对该系列气体燃烧机控制系统进行深入分析的基础上，提出采用电子式程控器来取代机电式程控器。
Computerized flat knitter is a typical complex electromechanical machine which involves a lot of technology in control, electron area.
电脑横机是一种涉及到计算机、机械、电子、控制等诸多领域，比较复杂的典型机电一体化产品。
Making the most of electromechanical facility to control the hardware resource of PLC in the system can simplify the design of hardware in diagnosing system.
充分利用机电设备控制系统中plc的硬件资源，可简化诊断系统的硬件设计。
This thesis introduced the situation of corrugated cardboard crosscut machine based on automatic control theory, electromechanical drive theory and computer theory.
论文以自动控制理论和机电传动控制理论以及计算机应用技术为基础，介绍了国内瓦楞纸板包装和纸板生产线的现况。
And the electromechanical simulation of coarse and fine tracking aiming system is done respectively which take the PID as algorithm for control, and MATLAB as tool for simulation.
引入PID控制算法，运用了MATLAB作为仿真工具，分别完成了粗精跟踪瞄准系统的机电动力学仿真。
Starter generators, generator control units, Compressor drive motors, DC electric motors, Centrifugal blowers, Vane axial blowers, Rewinding electromechanical services.
发电机起动器，发电机控制单元，压缩机驱动马达，直流电动机，离心式吹风机，叶片轴向吹风机，重绕机电产品服务。
Therefore, this article will study the dynamics and control strategy of vehicle traction and braking systematically by considering the transmission system and the electromechanical coupling relations.
因此，本文将从考虑传动系统及机电耦合的角度，对高速列车牵引制动控制及其动力学特性进行深入的研究。
The stepping motor is a precision electromechanical incremental actuator. It widely USES the digital approach for control of industrial machines.
步进电机是一种进行精确步进运动的机电执行元件，它广泛地用于工业机械的数字控制。
This instrument is an electromechanical product, the programmable logic controller (PLC) is used for the control, and sensors are used for measuring the useful life of the parts detected.
该仪器为机电一体化产品，采用可编程序控制器控制，利用传感器判别被检部件是否失效及寿命长短。
The multiple throttling system is a set of complicated equipment combining electromechanical technology with computer-control technology.
多级节流系统是一套结合了机电技术及计算机控制技术的复杂设备。
This paper will focus on the math model and control method of an induction machine based four ports electromechanical converter (EVT).
本论文主要就感应式四端口机电能量变换器（EVT）的数学模型以及控制方法展开研究。
The data on the turntable were always transmitted by electromechanical slip-rings to the main control computer.
转台上的数据一般采用机电滑环传输至转台之外的主控计算机。
To reduce the cost of cruise control, so old it easier to install the system on the electrical system electromechanical cruise control parts of the design.
为降低巡航系统的成本，使旧车加装该系统更加容易，对机电式巡航系统的电控部分进行了设计。
The piezoelectric materials have strong electromechanical couple ability so that they are mostly used in intelligent structures especially for the problem of vibration control.
压电材料(压电陶瓷和压电聚合物)具有很强的力电耦合效应而成为智能结构中应用最为广泛的智能材料。
In order to solve the problem of electromechanical coupling that influencing the control effect in the control of two vibration hammers, the influence law of electromechanical coupling is studied.
针对多桩锤控制同步时出现机电耦合作用影响控制效果的问题，对两桩锤间的机电耦合规律进行了研究。
Topography new motor and control structure appeared not punished, introduced a new generation of electromechanical integration, motor drive system has developed rapidly.
新的电机拓朴结构与控制方式层出不究，推出了新一代机电一体化电机驱动系统迅猛发展。
This paper mainly introduces the integrated application of Delta electromechanical products in numerical control polysilicon cutting machine.
本文主要介绍台达机电产品在数控多晶硅切断机床上的整合应用。
The invention relates to a manual control device of an accelerator of an electromechanical integrated automobile. An accelerator control panel is arranged at the outer edge of a steering wheel;
一种机电一体化的汽车油门手动控制装置，油门控制板安装在方向盘的外缘，由驾驶员的握力决定油门的大小。
The company is good at automatic control, electromechanical integrating, mechanical engineering and hydraulic pressure engineering, etc.
公司主要以自动控制、机械工程、液压工程和机电一体化产品见长。
The combined distributor of patterning electromechanical drive system can be used matching the electronic control system and measuring system.
本实用新型具有省工省料，使用可靠，并能和电子控制，测量系统配套。
应用推荐