We discuss signal testing and processing in two dimension electromagnetic testing system.
本文对二维电磁探伤系统的结构和信号检测与处理做了探讨与研究。
Magnetism measuring, Barkhausen noise and magnetic acoustic emission were often used for electromagnetic testing.
电磁检测方法主要有材料磁性量测、巴克好森噪声和磁声发射。
Among those nondestructive testing methods for wire ropes, the electromagnetic testing method is recognized as the most credible one.
电磁检测法是目前公认的最可靠的钢丝绳检测方法。
Electromagnetic testing and ultrasonic testing are the main points for materials hardness, hardness depth, crystallite size, limiting intensity etc.
对材料硬度、硬化层深度、晶粒大小、极限强度等主要采用电磁检测和超声检测。
Sensitivity is an important performance target for wire rope electromagnetic testing instrument, and can be calibrated by means of reference standard.
灵敏度是钢丝绳电磁检测仪器的一个重要的性能目标，并且可以通过参考标准进行校准。
Or you could sit at a bench with other technicians placing completed cell-phone circuit boards into lead-lined boxes resembling small kilns, testing each piece for electromagnetic interference.
又或者你得和其他技术员们一起坐在凳子上，将完工的手机电路板放到类似于小炉子的衬铅盒子里，以检测每块部件的电磁干涉。
In electromagnetic compatibility (EMC) testing of vehicle communication system, intermodulation interference between vehicle radio stations is a very important content.
在车载通信系统电磁兼容(EMC)测试中，车载电台间的互调干扰测试是很重要的内容。
Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test.
电磁兼容性(emc)。第4 - 3部分：试验和测量技术。辐射、射频和电磁场抗干扰试验。
Electromagnetic compatibility (EMC) - Part 4-11: testing and measurement techniques - voltage dips, short interruptions and voltage variations immunity tests.
电磁兼容性。第4- 11部分：试验和测量技术。电压磁倾角、短暂中断及电压随变抗扰性试验。
A series of system testing and experiment were done on embedded electromagnetic flowmeter.
对嵌入式电磁流量计进行一系列的系统测试和实验。
On the basis of the theories, the release voltage value of electromagnetic relay in the accelerated storage life testing were fitted and forecased respectively.
在此基础上，针对电磁继电器贮存加速寿命试验所得到的释放电压数据分析进行拟合与预测，并对各种回归分析方法的拟合与预测结果进行了精度分析。
An online combined NDT technology is introduced, which composed of electromagnetic identification of materials, eddy current and magnetic flux leakage testing and ultrasonic measurements.
在此基础上介绍一种由电磁分钢、涡流探伤、漏磁探伤及超声测量组成的钢管在线组合检测技术及其应用结果。
It is pointed out that the research, development and popularization of electromagnetic ultrasonic testing and ultrasonic detection of leakage in steam pipelines should be carried out.
阐述了我国电站锅炉管道无损检测自动化技术的发展趋势，提出应积极研究、开发和推广电磁超声技术和蒸汽管道泄漏超声检测技术。
It also tests the performance of electromagnetic vibration absorber by home-made testing system.
利用自主研制的测试系统，完成了电磁减振器的性能参数的测试。
The paper introduced the principle and method of measuring the thickness and inspecting the defect with electromagnetic eddy current testing for tubes of in-service heat exchanger in urea plant.
本文介绍了用电磁涡流法对尿素装置在用换热器管子进行测厚及探伤的原理及方法。
The testing report should clearly explain the consistency between the testing procedure adopted by each specific electromagnetic phenomenon and the testing procedure given by GB/T17626.
试验报告应明确地说明对每一特定的电磁现象所采用的试验程序与GB/T17626标准中给出的试验程序的一致性。
Electromagnetic environment testing system constituents and equipment parameter are discussed, issues for attention and sensitivity calculation approach are presented.
讨论微波站电磁环境测试系统的组成和设备参数，指出测试过程中需要注意的问题以及系统灵敏度的计算方法。
Firstly, according to electromagnetic interference electromagnetic compatibility testing of existing methods of in-depth research.
本文首先根据电磁兼容对现有电磁干扰测试方法进行了深入的研究。
With the application of the high frequency electromagnetic wave, more and more people turned to study the non-destructive testing technology.
随着对高频电磁波理论研究的深入和广泛应用，人们越来越重视对无损检测技术的研究。
The invention provides a linear testing device for an electromagnetic actuator of a diesel engine.
本发明提供的是一种柴油机直线式电磁执行器测试装置。
This paper first describes the overview of electromagnetic compatibility testing technology, the overall structure of the system and the key technologies.
论文首先介绍了电磁兼容测试技术的概况和本系统整体结构以及其关键技术。
The paper analyze the radiated disturbance problem in electromagnetic radiated testing of unshielded enclosure terminal product T500 and give the specified solution for the problem.
分析了非屏蔽外壳设计的某终端产品T500在辐射发射测试中存在的问题，并提出了具体的解决方案。
Testing signal is very sensitive to the lift off effect in the hardness nondestructive testing of rail surface by electromagnetic method, so lift off effect must be restrained.
电磁无损检测钢轨踏面硬度中，检测信号对提离效应极其敏感，所以必须对提离效应加以抑制。
The surge simulator is an important instrument that electromagnetic compatibility testing and measurement techniques.
电浪涌发生器是电磁兼容抗干扰试验中用到的重要仪器。
These two methods can be used easily, safely with good immunity to electromagnetic interference, therefore, they are suitable for on site testing and on line monitoring.
这两种方法具有方便灵活、操作安全、抗干扰性强等优点，适合于现场验收试验和在线检测。
A new method of on line nondestructive testing for the flaws on graphite spheres surface with electromagnetic eddy current is stated.
描述了一种新的利用电涡流进行石墨球表面缺陷检测的在线无损检测方法。
Artificial neural network is an effective means for quantitative electromagnetic nondestructive testing.
人工神经网络是实现电磁无损检测定量化的有效途径。
Firstly, the paper has had an in-depth research on the existing testing methods of electromagnetic interference, according to the theory of electromagnetic compatibility.
本文首先根据电磁兼容对现有电磁干扰测试方法进行了深入的研究。
Firstly, as an principal condition, the testing media must penetrate the deep concrete to steel bars, for this consideration, the electromagnetic method is supposed to be an principal testing method;
首先，分析检测原理，由于钢筋深埋在水泥杆里，检测手段必须具有穿透性，综合考虑选择电磁法作为检测方法；
Studying on the auditing methods of the safety integrity of hardware and software, the method of "Proven in Use" and the testing method of electromagnetic stamina.
对硬件安全完整性等级的审核分别采用了结构限制的定性分析法和要求时平均失效概率的定量分析法。
应用推荐