Signal is transmitted through current field type electromagnetic signal channel.
信号传送采用电流场型电磁信号通道。
The methods of active source electromagnetic signal homing is described in detail.
对主动源电磁信号寻踪法做了较详细的介绍。
Your mobile phone will send electromagnetic signal even when it is in standby state.
您的移动电话处于待机状态时，仍会发射电磁信号。
The latency cannot be less than the distance the electromagnetic signal has to travel divided by the speed of light.
延迟时间会大于或等于电磁信号传输距离除以光速的比值。
The specific points of GPS measurement mechanism are one way electromagnetic signal propagation and transparent navigation message.
GPS测量机制的特点为单向电磁信号传播及透明的导航电文。
The transient electromagnetic method has a maximum depth because of continuous attenuation by transmission of electromagnetic signal in underground.
由于电磁信号在地下传播时不断衰减，瞬变电磁测深法有一个最大探测深度。
Transmitter is the equipment that transmits electromagnetic signal. It determines the performance of the electronic equipments, and plays an important role in our lives.
发射机是发射电磁信号的设备，是决定电子系统性能的重要设备，在我们的生活中扮演着重要的角色。
Transmitter is the equipment which transmits electromagnetic signal. It determines the performance of the electronic equipments, plays the most important role in our lives.
发射机是发射电磁信号的设备，是决定电子系统性能的重要设备，在我们的生活中扮演着重要的角色。
Based on the Electromagnetic Signal, this paper studied the Theory of Relativity time space measure and deduced a basic formulas as well as discussed some practical questions.
基于电磁信号，对相对论时空测量进行了研究，得出时空测量的基本公式。
Practice demonstrated to reduce lateral influence avoid other electromagnetic signal disturbance rationally select inducing mode and position have prodigious influence on detection effects.
实践证明，为减小旁侧影响，避免其它电磁信号干挠，合理选择激发方式、激发位置对探测效果影响很大。
The information technology equipment may produce electromagnetic leakage; the electromagnetic signal can be restored; thus the confidential matters can betrayed through electromagnetic leakage.
信息技术设备会产生电磁泄漏，泄漏的电磁信号会还原为有用的信息，造成泄密。
The visual technology of electromagnetic signal in the virtual battlefield environment was investigated and several description methods of signal in the time-field and space-field were introduced.
对虚拟战场环境中电磁信号的可视化技术进行了初步的研究，介绍了几种通信信号和干扰信号的时域和空间域的绘制方法。
When the antenna receives a signal, the electromagnetic energy is converted from AC to DC.
当天线接收到信号时，电磁能量将从AC转换到DC。
Electromagnetic voltage transformer and capacitance divider are usually used to get voltage signal in power system.
目前电力系统电压信号的采集，大多采用电磁式电压互感器和电容式分压器。
Because there are so many interferences in the industry, especially the electromagnetic stirring make the noise is more greater than the useful signal.
由于工业现场存在大量干扰，尤其是电磁搅拌转置的使用，使得干扰比有用信号强很多。
The flow signal of electromagnetic flowmeter is based on fluid criterion.
电磁流量计的流量信号是以流体为基准的。
This paper studies transmission characteristic of fast rising time EMP (electromagnetic pulse) signal in bounded-wave simulator by using numerical calculation.
通过数值计算，研究了快上升沿电磁脉冲信号在有界波模拟器中的传输特性。
This text analyses that earth noise and electromagnetic reasons and countermeasures penetrated emerge in the printed circuit board signal earth design of PCB.
本文分析pcb印刷电路板信号接地设计中产生接地噪声及电磁幅射的原因和对策。
The expression and frequency variety law of the rotor broken bar fault feature component in the startup electromagnetic torque signal are analyzed in detail.
分析了转子断条故障特征在电机启动电磁转矩信号中的表现形式及频率变化规律。
Single electromagnetic vector sensor array is analyzed and DOA estimation in terms of the principles of array signal processing.
根据阵列信号处理原理，对单个电磁矢量传感器分析，并进行DOA估计。
This paper deals with design principles, development and performance of a field measurement instrument for nuclear electromagnetic pulse (EMP) based on signal transmission through fiber.
介绍了基于光纤信号传输的核电磁脉冲场探测仪的原理、设计研制及达到的技术性能指标。
Technical issues such as signal mismatch, data loss, electromagnetic induction, and disturbances from existing networks are concerns for wireless reliability.
诸如信号不匹配、数据丢失、电磁感应以及干扰现有的网络等技术问题是人们对无线可靠性的关注。
The accuracy grade of frequency collection is improved, the function modular to prevent lightning and electromagnetic disturbance of signal and power source is added.
提高了频率采集的精度等级，增加了信号及电源防雷击和抗电磁干扰功能模块。
We discuss signal testing and processing in two dimension electromagnetic testing system.
本文对二维电磁探伤系统的结构和信号检测与处理做了探讨与研究。
The voltage transformer used in power system usually adopts electromagnetic configuration whose output signal can't be directly used by electronic apparatus without further transformation.
电力系统对电压的测量主要采用电磁式电压互感器，需进行二次变压，才能将电网上的信号变为电子测量装置可用的信号。
Further, the electromagnetic sensor may be operable to produce a signal representing the measured response by the construction material to the electromagnetic field.
此外，电磁传感器可用于产生表示测得的建筑材料对电磁场的响应的信号。
The electromagnetic compatibility about the power supply circuit, the input channels of signal, the earthing and the communication network is also researched.
从电源供电回路、信号输入通道、地线、通讯网络等方面对有关的电磁兼容进行了研究。
Moreover, high speed circuit design such as signal integrity and electromagnetic coexist is researched and PCB is designed on schematic. PCB layout and route are mainly solved in PCB design.
并且，研究了高速电路设计所涉及的如信号完整性和电磁兼容性问题，并在其指导下根据原理图进行了PCB设计，重点攻克了低成本架构带来的布局布线困难。
The combiner can not only receive and handle the digital signal from many collectors but also the analog variable of current and voltage provided by the electromagnetic transformer.
合并器除了可以接收并处理来自多个采集器的数字信号外，还可以接收并处理电磁式互感器提供的电压、电流模拟量。
With the fiber optic and driver circuit, it brings about the precision of signal transmission and decrease of electromagnetic interference.
信号经过光纤和驱动电路，实现了信号的精准传输，减少了电磁干扰。
应用推荐