The experiment used electrode with different rotation speed to process deep-small holes, and collected the time data during the whole process, after this more of the processing curves could be formed.
采用不同旋转速度的电极进行电火花深小孔加工，通过采集加工时间数据，得到多条加工曲线。
The SL circuit reduces electrode wear to 50%. Specially designed PL circuit is excellent for hard alloy workpiece with fast machining speed.
SL回路可将电极之损耗降低50%；PL回路为超硬合金专用，加工速度快。
This machine have the common use of LCD printing technics adopt electrode driving assort with linearity track speed can be adjusted unlimited a stable printing.
本机已有一般常用线路板印刷工艺，印刷行程采用电机传动，配合线性导轨，速度可无级调节，印刷稳定。
In this paper various metal transfer modes in the pulse MIG welding with steel electrode are studied by means of high speed cine camera and oscillograph.
本文利用高速摄影机和示波器研究了钢焊丝熔化极脉冲焊的各种熔滴过渡形式，试验是在平焊和仰焊位置进行的。
Measures were taken to prevent welding cold cracking such as improve welding technology by decreasing cooling speed and adopting low-hydrogen electrode, etc.
通过改进焊接工艺来降低冷却速度和采用低氢型焊条等措施来控制焊接冷裂纹的产生。
Two cores melting speed can keep consistence is very important for twin electrode single arc welding to be stabilized.
两焊芯熔化速度能否保持一致是双电极焊条单弧焊过程能否稳定进行的关键。
The results show that threeelectrode DC ladle furnace, increasing heating speed and without arc bias, can overcome the shortcomings of bottom-electrode DC ladle furnace.
试验表明，三电极直流钢包炉技术可解决底电极式直流钢包炉存在的不足，使炉子加热速度快和不发生偏弧现象。
Rotating disk electrode system is used to study the coating roughness in high-speed zinc plating.
将旋转圆盘电极体系应用于高速镀锌层粗糙度的研究。
In addition, the influence of the spark energy, the gas stream speed and the electrode distance on the lean ignition limit of the gasoline-air mixtures by an automobile ignition coil was determined.
此外，利用汽车发动机点火系统测试了电火花能量、来流速度、电极距离等因素对汽油-空气预混气的着火稀限的影响。
The effect of span between two cores of lime-titania type carbon-steel electrode was investigated using the method of overlay welding on the plate work-piece and high speed camera system.
采用平板堆焊的方法及高速摄像系统，研究了双电极钛钙型碳钢焊条的焊芯间距对焊接工艺和电弧形态的影响。
Weld penetration and wire melting speed of AC PMIG welding not only have relationship with welding current but also with electrode negative ratio.
交流脉冲MIG焊其焊缝熔深及焊丝熔化速度不仅与焊接电流有关，而且与负极性比率有关。
Using monolithic computer to measure the rapping acceleration of collecting electrode and corona electrode has the feature of high accuracy, high speed, automatic display and printout of results.
应用单片机组成电路测试电除尘器集尘极和电晕极的振打加速度，精度高、速度快，能自动显示打印结果。
This machine have the common use of LCD printing techniques, adopt electrode driving, assort with linearity track, speed can be adjusted unlimited, a stable printing.
本机已有一般常用线路板印刷工艺，印刷行程采用电机传动，配合线性导轨，速度可无级调节，印刷稳定。
With high speed camcorder system and digital oscillograph, this paper investigated the electric arc shape of lime titania type twin electrode.
用高速摄像系统及数字示波器对双电极钛钙型碳钢焊条的电弧形态进行了研究。
This paper investigates the high speed wire electrical-discharge machining (HSWEDM) of Si3N4-based ceramics by assisting electrode method.
通过辅助电极利用高速走丝电火花线切割加工的方法对绝缘陶瓷氮化硅作了加工实验研究。
Because walks silk thread cutting to walk the silk speed slowly to be slow, the electrode silk's vibration is also small, can suit the big taper the cutting processing.
由于慢走丝线切割的走丝速度较慢，电极丝的抖动也较小，能适合大锥度的切割加工。
Electroslag remelting's consumable electrode current is determined by the distance between electrode and slag bath which is determined by the rotate speed of motors driven by electrode.
电渣重熔的自耗电极电流大小取决于电极与渣池的距离，而该距离大小又取决于电极驱动电机的转速。
When electrode negative ratio is zero, which is using MIG welding with DC ami welding wire being positive polarity, weld penetration is maximum , wire melting speed and deposition rate are minimum;
当负极性比率等于零即直流且焊丝为正极性的MIG焊时，其焊缝熔深最大，焊丝熔化系数最小，熔敷速度最小；
When electrode negative ratio is zero, which is using MIG welding with DC ami welding wire being positive polarity, weld penetration is maximum , wire melting speed and deposition rate are minimum;
当负极性比率等于零即直流且焊丝为正极性的MIG焊时，其焊缝熔深最大，焊丝熔化系数最小，熔敷速度最小；
应用推荐