Effect of basicity of electrode coating on desulphidation and dephosphorization is studied.
通过试验研究了焊条药皮碱度对熔敷金属脱硫脱磷行为的影响。
The component of electrode coating has certain effects on the usability of stainless steel electrode.
焊条药皮成分对不锈钢焊条工艺性能有较大的影响。
The special roller coating technology for electrode coating was chosen on the basis of rheologic property of the slurries.
依据锂离子电池浆料流变特性选用特殊结构的辊涂工艺进行极片均匀涂布。
The machine iS the special equiment for electrode production. Lt can be used for the head-tail grinding of the electrode coating in the production line.
本机是生产电焊条的专用设备，在焊条生产线中担负焊条外皮的头尾磨削工艺。
A specific hard-facing electrode is developed for die insert of big form cold die. The composition of electrode bar and electrode coating are given out experimentally.
介绍一种新研制的适合于大型冷冲模镶块刃口堆焊的专用堆焊焊条，通过试验确定了焊条的合金成分并给出了比较合理的焊芯和焊条药皮化学成分。
The influence factors such as the hydrogen content in weld metal, the hydroscopicity in electrode coating and the toughness of weld metal of basic electrodes are studied.
研究了碱性焊条工艺性的影响因素，探讨了焊缝金属的含氢量、焊条药皮的吸湿性、焊缝金属的强韧化特性等。
The Illinois researchers made their electrode by coating a surface with tiny polystyrene spheres just a few hundred nanometers across, packing the spheres together into a regular lattice structure.
伊利诺伊大学的研究者们先在阴极表面镀上聚苯乙烯小球构成的镀层，这些小球只有几百个纳米大小。
Insulating layer: coating on the electrode or hanging fixture, a part of the surface of the part of conductive material layer.
绝缘层：涂于电极或挂具的某一部分，使该部位表面不导电的材料层。
This article has described the characteristic of the anti-oxidization coating on the side of graphite electrode used for EAF melting and its development process.
详细介绍了电炉炼钢用石墨电极柱侧面防氧化涂层的特点及开发过程。
Hence, the spot welding result of aluminum alloy with the coating mixture of mineral oil and BBC is better, and the electrode life of aluminum alloy spot welding is prolonged.
因而铝合金表面涂敷矿物油和BBC的混合物时，电极烧损程度较轻，电极使用寿命得到了延长。
By adding magnesium powder into the coating of electrode, the sulphurs removal in deposited metal was satisfactory.
通过理论分析及实验，探讨了手工电弧焊焊条药皮中添加金属镁粉的脱硫效果。
With the result the coating projects beyond the molten end of the electrode metal .
结果药皮伸延于焊条金属芯熔端之外。
Rotating disk electrode system is used to study the coating roughness in high-speed zinc plating.
将旋转圆盘电极体系应用于高速镀锌层粗糙度的研究。
The results show that the realizing flux-wall to guid transfer form of metal droplet is a prerequisite to the fine usability of double coating electrode.
结果表明：双层药皮焊条熔滴实现渣壁过渡形态，是焊条良好工艺性的前提条件；
The conductive coating has excellent heat resistance, corrosion resistance and mechanical physical properties required by manufacturing of electrode.
该导电涂料具有良好的耐温性、耐腐蚀性及电极制作所要求的机械物理特性。
Properties and preparing process of tri layer films with Ag base coating, Ni electrodeposit, Sn Pb alloy for terminal electrode of multilayer chip inductor were described.
介绍了叠层片式电感三层端头电极即银基底电极、镍层、锡-铅合金镀层的性能及制备工艺。
Particulate of graphite electrode wastes from an electric-carbon materials factory was formed "core-shell" negative materials by chemical deposition coating with medium pitch.
以大功率石墨电极废品破碎后的微粒为“核”，以中温沥青为包覆原料，经化学沉积包覆形成“核-壳”型锂离子蓄电池负极材料。
The corrosion behavior of electrode of stainless steel with polyaniline coating in corrosive acid media were investigated.
研究了由聚苯胺修饰的不锈钢电极在酸性介质中的腐蚀行为。
Based on research on available electrostatic spray painting equipment, grid electrode used as high voltage electrode for electrostatic coating on food surface.
在研究已有的静电喷涂装置基础上，采用栅网电极作为食品表面静电涂敷高压电极。
Effect of TiC coating on electrode tip surface on electrode degradation during micro-resistance spot welding;
本文主要研究了微型点焊镀镍钢板和镍板时电极失效的机制。
After the spray coating the electrode is ready for use without further treatment.
在喷涂涂层后，电极无需进一步处理即可使用。
Based on experiments, the coating compositions of nickel ferro type cast iron electrode have been worked out using regression method and computer - aided optimization.
在试验的基础上，应用二次混料回归设计试验方法设计镍铁型铸铁焊条药皮渣系的配方，借助计算机辅助优化，获得了综合工艺性能优良的镍铁型铸铁焊条。
J422 is carbon steel type electrode with Titanium-calcium coating.
我公司生产的J422焊条是钛钙型药皮的碳钢焊条。
J422 is carbon steel type electrode with Titanium-calcium coating.
我公司生产的J422焊条是钛钙型药皮的碳钢焊条。
应用推荐