The production line is composed of de-coiler, punching, roll forming (welding), cutting system, electric control system, etc.
整条生产线由放料系统、冲孔系统、成型系统(焊接技术)、切断系统、电控系统等部分组成。
The forming condition of crystal and closed pore in tabular alundum produced with electric melting is estimated and determined theoretically.
从原理上判断和估计了电熔板状刚玉结晶体和阔气孔的形成条件。
The forming reasons of electric lighting and circuit fires are analyzed mainly in this paper, and corresponding precautionary measures are put forwarded.
电气火灾呈上升趋势，本文重点对电气照明火灾和电气线路火灾的形成原因进行了分析和探讨，并提出了相应的预防措施。
A new reverse educing method about forming blank has been given based on the similar equipotential-field, which refers to the universal law of the electric field analogy theory.
依据电场模拟的一般规律，提出了一种基于等势场的材料成形坯料反推新方法——类等势场反推法。
The system adopts an upper - lower structure and touch screen technique. A great development in electric control theory of the vacuum - forming machine is made.
该系统采用上下位机形式的结构以及触摸屏技术，实现了真空成型机电气控制技术的新突破。
The production line is composed of de-coiler, punching, forming, cutting system, electric control system, etc.
整条生产线由放料系统、冲孔系统、成型系统、切断系统、电控系统等部分组成。
A double-strike direct electric drive screw press is a new machine used in particle and dispersed material forming.
双击式直接电动螺旋压力机是用于颗粒材料及离散材料成形的新型机器。
The production line is composed of de-coiler, leveler, punching, forming (welding), cutting system, electric control system, etc.
整条生产线由放料系统、冲孔系统、成型系统(焊接技术)、切断系统、电控系统等部分组成。
On the basis of a lot of experimental datas, experimental mathematical models of electric spark forming of several sorts of materials are built up with multiple linear regression analysis.
在大量实验数据的基础上，采用最小二乘法建立了实用的多种材料电加工实验数学模型。
The production line is composed of de-coiler, leveler, punching/cutting, roll forming , electric control system , etc.
整条生产线由放料系统、校平系统、冲孔/切断系统、成型系统、电控系统等部分组成。
The authors of the paper have also studied the deformation law of rocking forming and proved that rocking forging parameters selected are reasonable by using the electric resistance strain m...
作者还研究了摆辗成形规律，并采用电测法和光塑性法证实了所选用的摆辗工艺参数合理，为推广该工艺提供了技术准备。
This program is the combination of Dynamic Mechanic, Electric Power system and Marine Automation, thus forming a specialty pattern of solid basic theory and wide knowledge of specialty.
本专业把船舶动力机械、电力系统与自动化融合于一体，形成基础理论扎实，专业知识宽广的专业模式；
The H62 brass was forming at high temperature in a strong electric field, the experimental results shown that the strong electric field has an obvious restrain effect on the deformation cavities.
将H62黄铜置于强电场中进行高温变形，发现强电场对金属变形时空洞的产生、长大及连接均有较强的抑制作用。
The production line is composed of de-coiler, roll forming, punching, cutting and electric control system, etc.
整条生产线由放料系统、成型系统、冲孔系统、切断系统、电控系统等部分组成。
The rule of forming gel, properties of powders and electric properties of ceramic materials have been studied.
本文主要对成胶规律。粉末的特性及陶瓷材料的电性能进行了研究。
The production line is composed of de-coiler, leveler, punching, roll forming, cutting system, electric control system, etc.
整条生产线由放料系统、校平系统、冲孔系统、成型系统、切断系统、电控系统等部分组成。
The iron sheet has special electric and magnetic properties after cold forming and heat treatment.
板坯直接经冷加工成材和热处理后，具有独特的电磁性能。
New forming process on the suction inlet of large-size electric motors as well as its raw materials dimension and mold construction is introduced.
介绍了大型电机吸风嘴成型工艺、坯料尺寸确定及模具结构。
The basic design procedure of forming the controller of an electric water heater with a single chipper is analysed.
介绍了用单片机构成电热水器控制器的基本设计方法。
The field pulse signal forming and width control circuit generates a field pulse signal A with the width being controlled by the accompanying sound electric level.
场脉冲信号形成及宽 度控制电路产生宽度受伴音电平控制的场脉冲信号A。
This paper introduces a microprocessor controlled PWM real time controller used in AC-DC-AC electric locomotive. A real-time forming method of multi-mode PWM waveform is described.
介绍了一种用十六位单片机实现的用于控制交-直-交电力机车道变器的PWM实时控制器，论述了PWM波形的实时生成方法。
Press forming of plastic products can be classified into thermosetting material forming and thermoplastic material forming. For example, bakelite of electric appliance industry.
塑料制品压制成型分为热固材料的成型和热塑性材料的成型。
The electric conductivity is a relative ruler to the conductance of ore forming solution.
电导度是溶液导电能力的相对尺度，电导度的大小能直接反映出成矿溶液的高低。
A kind of error correction coding methods in the communication between singlechip′s serialport and PC in the electric spark forming machine control system is proposed.
该方法采用纠错编码支持向量机的多类分类技术，降低了经验风险，能对误差进行自动修正，有效地提高了识别率和识别速度。
The phenomenon is called electric nonlinearity for sensitivity. The nonlinear resistors, forming the bridge in pressure sensor, are influenced by temperature, input voltage and pressure together.
本文指出组成压阻型压力传感器电桥的电阻受温度、输入电压、压力的共同影响，在此基础上提出非线性扩散电阻的多维模型。
We engage in the electric and mechanical machinery import and export business, forming stable and reliable oversea suppliers and domestic sales market.
具有机电产品进口业务的丰富经验和厚重积累，形成了稳定的海外供货渠道和可靠的国内销售市场；
New metal forming technologies are required to be developed for new materials and new products according to the needs of automotive industry, electrical and electric industry and aerospace industry.
以汽车、电子电器和航空航天等工业为需求，研究新材料和新产品的塑性加工工艺。
New metal forming technologies are required to be developed for new materials and new products according to the needs of automotive industry, electrical and electric industry and aerospace industry.
以汽车、电子电器和航空航天等工业为需求，研究新材料和新产品的塑性加工工艺。
应用推荐