The mechanical models for bulged casing and expandable body are set up based on elastoplastic finite element theory.
根据弹塑性有限元理论，建立了膨胀套管和膨胀心头的力学模型。
In this paper, an elastoplastic finite element method is used for the analysis of non-axisymmetric deep drawing processing.
本文利用弹塑性有限元法分析了非轴对称拉延过程。
The Monte Carlo method combined with the elastoplastic finite element method (FEM) is proposed to analyze the slope stability problems.
蒙特卡洛随机搜索法与弹塑性有限元法结合，求解边坡稳定问题。
The temperature and stress-strain field of steel plate runout table cooling are simulated using thermo-elastoplastic finite element method.
针对钢板冷却发生翘曲变形的问题，利用热弹塑性有限元法对中厚板冷却过程的温度场及应力应变场进行数值模拟。
The residual stress around a coldworked hole is computed with elastoplastic finite element methods of both flow theory and deformation theory.
研究了基于形变理论的金属板料成形快速有限元分析的方法——反向方法 ，并实现了计算程序。
By using the elastoplastic finite element method, mechanical model for wear tension and internal pressure resistance of casing joints is set up.
采用弹塑性有限元方法，建立了套管接头磨损拉伸与抗内压的有限元力学模型。
This paper deals with the numerical simulation analysis of hot extrusion forming process of the Hooke's Joint using three-dimensional elastoplastic finite element method.
采用三维弹塑性有限元法对虎克式万向节热挤压成形过程进行了数值模拟分析。
In this paper an elastoplastic finite element method is employed to simulate the procedure of the failure of the supports for excavation, by which the factors are analyzed.
本文用弹塑性有限元方法模拟基坑破坏过程，分析了影响基坑支护破坏的因素。
In this paper, the interlaminar stress distributions of symmetric composite laminates with a hole are predicted by the three-dimensional elastoplastic finite element method.
本文用三维弹塑性有限元法计算了含圆孔对称复合材料层板的层间应力分布。
This work expands the application range of ABAQUS in elastoplastic finite element analysis, and set an example for developing other functions of ABAQUS and finite element software.
论文所完成的工作扩大了ABAQUS在弹塑性有限元分析中的应用范围，并为ABAQUS其他功能的开发以及有限元程序的开发提供了借鉴。
Meanwhile, with other engineering concrete examples, the applicability of contact elastoplastic finite element algorithm used to analyze the debris landslide stability was studied.
同时，结合其他工程实例，对弹塑性接触有限元算法在碎石土滑坡稳定性分析中的适用性进行研究。
In this paper the effect of strength matching of welded joint on welding residual stress distribution in plate welded joints was studied by an thermal elastoplastic finite element method.
采用热弹塑性有限元方法，对平板对接接头中焊缝金属强度组配对焊接残余应力分布的影响进行了研究。结果表明，对于高组配接头，纵向残余应力的峰值接近焊缝金属的屈服极限，出现在焊缝中心。
A three dimensional elastoplastic finite element model is presented for thermomechanical coupled finite deformation problems, and using the model, a slab hot rolling is computer simulated.
建立了三维热力耦合问题弹塑性有限变形有限元方法，并对板材热轧过程进行了计算机模拟。
This paper analyses grouting reinforcements influence on slide plane and surrounding rock stability during the construction in Caijiapo tunnel, using the elastoplastic finite element method.
采用弹塑性有限元法分析了柴家坡隧道在施工过程中注浆加固对滑动面和围岩稳定性的影响。
This paper analyses grouting reinforcement's influence on slide plane and surrounding rock stability during the construction in Caijiapo tunnel, using the elastoplastic finite element method.
采用弹塑性有限元法分析了柴家坡隧道在施工过程中注浆加固对滑动面和围岩稳定性的影响。
The stress distribution of continuous and recessed bonding single-lap joints is discussed with use of elastoplastic finite element method (FEM) and experiment, considering the effect of fillet.
运用弹塑性有限元法结合实验研究了连续和间隙连接的单搭接接头应力分布规律，并考虑了胶瘤的影响。
In this paper, the three dimensional elastoplastic analysis of a group pile soil interaction system is made by using the finite prism element method.
应用有限棱柱单元法对群桩与土相互作用系统进行了三维弹塑性分析，并以无限棱柱元模拟半无限空间地基土的边界条件。
The iterative formulas of elastoplastic stochastic finite element method (SFEM) under cyclic loading are deduced and the random responses of local multiaxial stress and strain are calculated.
推导了交变载荷下弹塑性随机有限元的迭代格式，计算了局部多轴应力应变的随机响应。
The finite deformation elastoplastic FEM theory is discussed and the finite element formula is given.
阐述了有限变形弹塑性有限元基本原理并给出有限元列式。
Then a finite element method for quickly solving elastoplastic contact problems is presented by using quasi-elastic summation and double-iteration.
而后，利用拟弹性叠加、双重迭代给出一种快速解弹塑性接触问题的有限元算法。
The transverse elastoplastic mechanical properties of fiber bundle reinforced composites were studied by using the micro mechanical model and finite element method.
利用细观力学模型和有限元法研究纤维束复合材料的横向弹塑性力学性能。
A thermal elastoplastic contact model which can take into account the effects of temperature-dependent yield strength was developed by using finite element method.
应用有限元方法建立了可考虑屈服应力温度相关效应的粗糙表面热弹塑性接触模型。
The iterative formulas of elastoplastic stochastic finite element method under cyclic loading were deduced.
推导了交变载荷下弹塑性随机有限元法迭代格式。
An implicit integration elastic stiffness method has been developed for the finite element analysis of rock and soil elastoplastic models.
本文提出了用于岩土弹塑性有限元分析的隐式积分弹性刚度算法。
D assembly FE modeling and dynamic elastoplastic analysis are carried out for the obturator structure of a floating gun breech mechanism by using nonlinear finite element code MSC MARC.
利用大型非线性有限元MARC ，对某自动迫击炮浮动炮闩闭气结构，进行了三维装配体有限元建模和动态弹塑性分析，获得了关键闭气构件的应力、塑性应变和变形的动态响应。
In this paper, the elastoplastic incremental finite element method with variable plastic stiffness is used to analyse the surrounding rock stability of underground openings.
本文采用三维弹塑性增量变塑性刚度有限元法计算地下洞室围岩稳定。
A finite element mathematical model was developed to calculate the thermal elastoplastic stress of continuous casting billet in mold.
建立了结晶器内连铸坯热弹塑性应力有限元数学模型。
The limit bearing capacity is obtained by using the refined finite element elastoplastic analysis on the concrete in the anchor head part.
对锚头部位混凝土进行精细有限元弹塑性分析，得到其极限承载力。
The limit bearing capacity is obtained by using the refined finite element elastoplastic analysis on the concrete in the anchor head part.
对锚头部位混凝土进行精细有限元弹塑性分析，得到其极限承载力。
应用推荐