The calculation example shows that the elastic stress analysis agrees with the results of the test.
算例表明，弹性应力分析结果与测试值符合良好。
Design by Rule, Design by Analysis, Elastic Stress Analysis, Limit Load Analysis, Elastic-Plastic Stress Analysis.
按规则设计，按分析设计，弹性应力分析，极限载荷分析，弹-塑性应力分析。
In this paper, an automatic measuring, data-gathering and processing system for three dimensional, photo-elastic stress analysis is described.
本文介绍了一种可供工程上应用的三维光弹自动测量、数据采集和处理系统。
Based on the elastic stress analysis, the stresses of the hoop fiber reinforced steel pressure vessels (compressed natural gas bottle) under internal pressure are obtained.
用弹性理论分析方法，得到了环向纤维增强钢压力容器(压缩天然气气瓶)在内压作用下的应力。
This paper presents the three dimensional stress analysis method of slabs on elastic foundation.
本文提出了弹性地基上板的三维应力分析方法。
The stress, strain and displacement in pavement structure can be computed by the mechanical analysis program of the multilayer elastic system.
应用多层弹性体系力学分析程序计算路面结构的应力、应变和位移。
Adopting elastic finite element analysis method to analyze temperature stress in large area concrete beam-slab structure may provide basis for extra huge building design.
对此采用一套以弹性有限元分析为基础的方法，对大面积混凝土梁板结构温度应力进行分析，可为超大建筑物的设计提供依据。
Stress and strain of elastic beam under inertial load was analyzed, and modal analysis of elastic structure was figured out.
分析了在惯性载荷作用下的弹性梁的应力及应变，并对弹性结构进行了模态分析。
Through bidirectional data interchange between ADAMS and ANSYS, dynamic stress analysis of this elastic mechanism is conducted.
通过进行ADAMS与ANSYS之间的双向数据交换，对该喷管弹性机构构件进行了动态应力分析。
Adopting elastic finite element analysis method to analyze temperature stress in large area concrete beam-slab structure may provide basis for ex.
对此采用一套以弹性有限元分析为基础的方法，对大面积混凝土梁板结构温度应力进行分析，可为超大建筑物的设计提供依据。
The negative elastic modulus method, highly accurate, easy to use, is useful in many cases, and it brings great convenience to the stress analysis oJ structures.
负弹模法可适用于多种情况，且精度高又省事，为结构应力分析带来极大方便。
This paper obtained the temperature effect caused by heat of hydration in hollow thin pier by thermal-stress analysis, considering the change of elastic modulus followed by time.
采用热-结构耦合分析的方法对水化热引起的空心薄壁墩的温度效应进行分析，计算中考虑了混凝土弹性模量随龄期的变化。
In this paer, by the use of the method of characteristic line of stress wave, a prediction analysis for the sacond impact of an elastic bar impacting on a rigid block is given.
本文采用应力波特征线方法详细分析了刚体撞块撞击固支的弹性长杆的撞击过程。
This paper USES the layered elastic analysis calculation procedure to analyze the stress condition and the strain condition in asphalt pavement.
本文利用弹性层状体系计算程序，对沥青路面内的应力应变状态进行了详细的分析。
By utilizing theory of elastic mechanics, this paper conducts circular compensator stress analysis. Research gives a calculation method of best pre-stress value.
本文利用弹性力学理论，对圆形补偿器进行应力分析，研究预加应力最佳值的计算方法。
The elastic-plasticity numerical analysis of a tunnel model which subjected to earthquake waves loads is done to study the tunnel surrounding rock's dynamic stress state.
进行了井下巷道地震反应的弹塑性分析，探讨了地震力作用下巷道围岩应力状态的变化规律。
The incremental elastic stress-strain relation is derived. The process is similar to the analysis in plastic flow.
类似于塑性流动分析方法，定义了增量弹性应力应变关系。
The analysis and contrast of deformation pattern, state of stress, plastic deformation history, plastic limit load and limit load of elastic buckling are analyzed and contrasted.
最后对三种结构型式的拱顶储罐的变形方式、应力状态、塑性变形历史、塑性极限压力、弹性失稳临界压力进行了分析与对比。
Based on the analysis and testing results, it can be proved that the stress in the vessel is still at elastic state.
经实测和理论分析证明，其应力水平在设计压力下仍处于弹性范围。
In the analysis of the elastic tripping of the stiffener, the critical stress under this mode of failure is derived by using the energy method and the principle of least potential energy.
对于加筋板中筋的侧倾失稳，则通过能量法推导加强筋侧倾失稳时的总势能泛函，利用最小势能原理求解出此失稳模式下的临界应力。
In numerical analysis, the stress distribution and the effects of the parameters in elastic stage are obtained by the finite element program of 20-node 3-dimensional solid element.
电算采用三维实体单元，对弹性状态下这种柱的受力特点和变参数影响进行了分析。
Elastic wedge model is used for analysis of excavation of homogeneous slope. On the basis of elastic plane-strain theory and the line folds to add theory, stress field of the excavation is got.
本文采用了弹性理论中的楔形体理论，对均质边坡开挖过程进行了分析，在平面应变问题的基础上结合线性叠加原理得到开挖坡体的应力场。
Then the finite element analysis is carried out, the elastic deformation and stress of the SCMW is studied by using of ANSYS, and the corresponding formula deduced above is proved.
采用了有限元软件ANSYS对钩杆进行了变形与应力分析，从而验证了第二章和第三章推导的相应公式的正确性。
Then, the strain accumulation model of EPFC growth is presented based on an analysis of elastic-plastic stress and strain at the crack-tip.
在对裂尖弹塑性应力应变分析的基础上，作者建立了疲劳裂纹扩展的应变累积模型。
In the structural mechanical analysis, previous research is more to establish elastic or elastic-plastic model to study the grid reinforced effect on pavement stress and deflection.
在结构力学分析方面，以往的研究多是建立弹性或者弹塑性模型来研究格栅对沥青路面应力及弯沉的影响。
Heat-fluid-solid coupling and contact thermo-elastic-plastic analysis was carried for a certain turbine blade-disc, and the stress and strain-time course was obtained in this paper.
采用随机有限元方法， 针对某燃气涡轮盘-片进行了热流固耦合及接触热弹塑性分析，得到了随机应力应变响应；
Heat-fluid-solid coupling and contact thermo-elastic-plastic analysis was carried for a certain turbine blade-disc, and the stress and strain-time course was obtained in this paper.
采用随机有限元方法， 针对某燃气涡轮盘-片进行了热流固耦合及接触热弹塑性分析，得到了随机应力应变响应；
应用推荐